SAK STACK 30 days challenge 2020 for Swisschamp, Cybertool & Toolchest
-
...that will sweep up the Handyman too...
-
Yes. The difference between Champion and Handyman is less than 1 mm.
-
I think 1” (scale to scale) is a good benchmark. These are all big SAKs...
-
...not always. Some 6 layers trump 7 layer SAKs because of chubby tools like pliers, LED, thicker scales, etc. 5 layer CT34 Cybertool is a hair wider than the Champion!
-
Hmmm....I think there are many ways to looks at this challenge rule, by width, by tool count, by lineage, by layers, etc...or any combination of those.
For now, I am still inclined to try to stick with the original rules of CT, Swisschamp and ToolChest variant, because that would be most fair to those whom have participated(or couldn't participate) in the past.But having said that, I was told there is a small leeway to give, if certain model is just 1 layer short(or 1-2 layers+) of Swisschamp(8 layers), and looking it up on SAKwiki, it will mean the 7 layers, which will include the CT41(which is already on list), and Champion C and Champion Plus(which both have direct lineage to Swisschamp, and same layers to CT41)
For Wenger/Delemont, it make sense to open upwards to 8-10 layers(Tool Chest is 7), because we do allow much, much bigger Swisschamp to join, all the way up to 15 layers.

@Max Stone said:
...not always. Some 6 layers trump 7 layer SAKs because of chubby tools like pliers, LED, thicker scales, etc. 5 layer CT34 Cybertool is a hair wider than the Champion!@ElevenBlade said:
When I had inquired previously about the Champion I was told it would qualify as it has 7 layers.I suppose its a layer issue...
The 1 inch discussion is interesting, but similar idea may keep opening doors for interpretation and soon it may become a fudge to explain. For example, Handyman, there supposed to have two versions, original vs modern, one is under 1 inch and the other is above 1 inch, is it fair to accepting one without the other?

One could argue why must there be a hard cut off at 1 inch and only accepting part of the 6 layers family? And if we start opening doors to some of the 6 layers from Victorinox line, why can't rest of the 6 layers from Victorinox and Wenger/Delemont join as well?(more than 20 in total) :ahhh
If we turn around and look at other challenges, remember we have a similar discussion earlier in the Minimal Challenge 2020? Folks were discussing the possibilities to include Soldiers into the Minimal challenge, eventually it was decided that it may be best to run them separately because it is difficult to accept Soldier into Minimal, while saying either yes or no to the 111mm Soldiers would feel awkward either way.
Anyhow, just for sake of discussion, this topic kinda reminded me our fellow member hiraethus discussing the concept of Wabi-sabi in Vidar's R&D thread. Sure, some of these challenge rules may or may not make perfect sense, but what matter most to me is our sense of camaraderie that we cultivated thru these challenges, and everything else to me could might as well be Wabi-sabi. ;)
-
*
I have the SAK STACK badge, but may be an unofficial participant.* -
@powernoodle said:
*
I have the SAK STACK badge, but may be an unofficial participant.*Nice looking stacks

-
@powernoodle said:
*
I have the SAK STACK badge, but may be an unofficial participant.*PN, welcome aboard!

This challenge welcomes everyone to join, so definitely don't hesitate to jump right in! :D
First timer(like myself) will get the forum badge when completed, but everyone whom joined and finished this challenge will get the fridge magnet.

SAK STACK 30 days Challenge in April 2020
- comis
- Sos24
- Zrxoa1
- Kraken
- BadMechanic
- Antti Lammi
- Ron Who
- Ivo
- Ulzhan
- Gath
- Rizio Il Ghiro
- ElevenBlade
- Pacu
- CraftsmanSAK
- Simon_Templar
- Max Stone
- SirVicaLot (work permitting)
- powernoodle
-
Oops, my name wasn't already on the list so I had to add it. :D
SAK STACK 30 days Challenge in April 2020
- comis
- Sos24
- Zrxoa1
- Kraken
- BadMechanic
- Antti Lammi
- Ron Who
- Ivo
- Ulzhan
- Gath
- Rizio Il Ghiro
- ElevenBlade
- Pacu
- CraftsmanSAK
- Simon_Templar
- Max Stone
- SirVicaLot (work permitting)
- powernoodle
- Alan K.
-
Great to have you join us!

-
Great to see the list growing.
-
-
Fellow knights,
Even though I have an office job (we are allowed to dress casually though), I am currently considering going "all in" and carrying the XLT for the duration of the challenge. Is this crazy? Your thoughts please.
Cheers,
Simon
-
Why would that be crazy? You never know when you might be forced to repair a nuclear reactor on the way to a meeting, so better have the XLT at the ready :D ;)
-
Why not? You'll definitely be prepared. I handed my regular Swisschamp to a coworker awhile ago and he remarked how big it is. Compared to the X series, it's a subcompact!!

-
That is true!

-
@SirVicaLot said:
Why would that be crazy? You never know when you might be forced to repair a nuclear reactor on the way to a meeting, so better have the XLT at the ready :D ;)True. Problem is, if I get the XLT out for anything less than that, my coworkers might think I have a midlife crisis (and they could be right
). Guess I will reserve it for weekends after all.Edit: I realize asking in THIS forum about whether anything SAK-related is crazy was a bad idea to begin with

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

