Help me decide.
-
PST

-
PX, no contest...

-
Considering your location and the local knife laws, and the fact that you wanna downsize: The Pioneer X.
Proven time and time again

-
Squirt
ok ok PX 
-
Pioneer X all the way. Perfect in every way and legal too.
You can win one from hiraethus in his 7000 post thread in the Break Room
its orange :ahhh -
The Pioneer for sure is going to be a quality piece, and a little cheaper than the LM. Plus, 100% Swiss, not "assembled in USA" of parts from wherever.
-
I'd go for the Pioneer X . UK legal for EDC and all the tools I use most.
-
The Pioneer X

-
@cody6268 said:
The Pioneer for sure is going to be a quality piece, and a little cheaper than the LM. Plus, 100% Swiss, not "assembled in USA" of parts from wherever.Do you own a Free T4? The T4 I bought was "Made in USA" according to the box. It also says "designed & manufactured in Portland, Oregon." Nowhere does it mention or imply foreign parts.
-
@parnass said:
Do you own a Free T4? The T4 I bought was "Made in USA" according to the box. It also says "designed & manufactured in Portland, Oregon." Nowhere does it mention or imply foreign parts.I knew the P-Series had to have at least enough parts in them for LM to be able to mark the pliers as "MADE IN USA", but not the T-Series. That actually brings the whole line up a few marks for me.
-
I bought the Pioneer X in May 2016 and Free T4 three years later.
Both are well built and have an impressive finish, but I prefer the Free T4 for a few reasons. The T4 tools meet my needs better, specifically the Phillips screwdriver and file, which are missing from the Pioneer X. I have no need for a can opener. Your needs may be different.
Too, all the Free T4 implements lock very firmly. I have had non locking screwdriver blades collapse under pressure while trying to drive screws into my barn's wooden walls and that was annoying.
The Free T4's large slotted screwdriver blade is thicker and better suited for prying than the thinner Pioneer X's blade.
The T4's pocket clip is an advantage to some owners, though I removed the clip because I prefer to carry my tools in a belt holster. Good luck with whichever you choose. They are good looking, well constructed tools.

-
@ UK members,
Is it the OHO, or the lock on the main blade, or both, (or any other feature - blade length?) that makes the Free T4 illegal as EDC (out on the streets)?Here's a frivolous thought: assuming it's only the lock, modding it to render it street legal might just be as simple as grinding off the locking surface on the main blade's tang/pivot area. Having said that, during any search on your person you would still have to explain this...

-
@parnass said:
I bought the Pioneer X in May 2016 and Free T4 three years later.Both are well built and have an impressive finish, but I prefer the Free T4 for a few reasons. The T4 tools meet my needs better, specifically the Phillips screwdriver and file, which are missing from the Pioneer X. I have no need for a can opener. Your needs may be different.
Too, all the Free T4 implements lock very firmly. I have had non locking screwdriver blades collapse under pressure while trying to drive screws into my barn's wooden walls and that was annoying.
The Free T4's large slotted screwdriver blade is thicker and better suited for prying than the thinner Pioneer X's blade.
The T4's pocket clip is an advantage to some owners, though I removed the clip because I prefer to carry my tools in a belt holster. Good luck with whichever you choose. They are good looking, well constructed tools.

Great info

I have the P2, I really like the tools and have used them way more than any other MT, just not using the pliers much, hence the downsizing.
I modified the knife to make it more UK friendly and would probably do something similar to the T4 but I look at the PX and think 'wow that's darn nice' and probably be just the ticket.
Anymore comparison pics of the two side by side, width etc

-
@Dutch_Tooler said:
@ UK members,
Is it the OHO, or the lock on the main blade, or both, (or any other feature - blade length?) that makes the Free T4 illegal as EDC (out on the streets)?Here's a frivolous thought: assuming it's only the lock, modding it to render it street legal might just be as simple as grinding off the locking surface on the main blade's tang/pivot area. Having said that, during any search on your person you would still have to explain this...

Howdy, it's the locks and length that UK law currently recognise as non legal.
In the case of the T4 it's the lock, blade, length ok.
I have thought about modifying it, either by tinkering with the locking mechanism and back of blade notch. Or making the blade into a cutting hook like I did on my P2.
-
I like leatherman but my vote goes to pioneer

-
Pioneer X awl the way!!!!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


