What's your latest flashlight?
-
Here's that Lumintop GT Micro with AA battery for size comparison(Can only use 14500 LIon tho):


-
Nice..That micro really is compact!!
-
A Nitecore MT21C just arrived. It is up to 1000 lumins in turbo mode. The head can be adjusted up to 90 degrees for use as a right angle light and it has a magnet in the base so it can be attached to a car fender or whatever you need it for.
-
@Alan K. said:
A Nitecore MT21C just arrived. It is up to 1000 lumins in turbo mode. The head can be adjusted up to 90 degrees for use as a right angle light and it has a magnet in the base so it can be attached to a car fender or whatever you need it for.Nice! Was looking at one of those a while back
How does the hinge feel? Solid or not?Sent fra min FRD-L09 via Tapatalk
-
I have added two new lights.
Emissar D4vn v2 in titanium and copper

HDS Rotary in bare aluminum.

-
@RF52 said:
Nice! Was looking at one of those a while back
How does the hinge feel? Solid or not?Sent fra min FRD-L09 via Tapatalk
The hinge is pretty well made. It feels solid and it clicks at each of 4 stops. You can hear and feel the clicks. The on/off switch is something I have to get used to as this is not a tactical light that comes on instantly at your preset preferred level of intensity. This is more of a tool box light so you have to hold the switch for a couple of seconds for it to turn on or off and it always starts at the lowest level and you have to cycle through the levels to reach the desired intensity. For that reason this light may end up in my bag and an instant on model (my P-12) will go back to my pocket or belt.
I like the Emissars Sos. I think I would prefer the titanium myself but either one should do the job. Very nice. -
@Alan K. said:
The hinge is pretty well made. It feels solid and it clicks at each of 4 stops. You can hear and feel the clicks. The on/off switch is something I have to get used to as this is not a tactical light that comes on instantly at your preset preferred level of intensity. This is more of a tool box light so you have to hold the switch for a couple of seconds for it to turn on or off and it always starts at the lowest level and you have to cycle through the levels to reach the desired intensity. For that reason this light may end up in my bag and an instant on model (my P-12) will go back to my pocket or belt.
I like the Emissars Sos. I think I would prefer the titanium myself but either one should do the job. Very nice.Thanks
That might be a bit annoying in the long run.Sent fra min FRD-L09 via Tapatalk
-
I bought a Fenix E20 (2015 version) XP-E2 today
I admit I did it almost for fun, now I only use 18650 lights and I have a bunch of unused 1xAA / 2xAA lights.
Tomorrow I want to see this light, then maybe I'll keep it for myself or give it a gift. -
I just bought a 25.4mm diffuser from Fenix for my Thrunite Neutron 2C. It fits perfectly and puts out pretty good light.
I have bought a lot of lights the last few months to test (hey, gotta try finding the right ones) and I think I have the ones I want to keep. It may be time to start culling the herd.
-
@Alan K. said:
The hinge is pretty well made. It feels solid and it clicks at each of 4 stops. You can hear and feel the clicks. The on/off switch is something I have to get used to as this is not a tactical light that comes on instantly at your preset preferred level of intensity. This is more of a tool box light so you have to hold the switch for a couple of seconds for it to turn on or off and it always starts at the lowest level and you have to cycle through the levels to reach the desired intensity. For that reason this light may end up in my bag and an instant on model (my P-12) will go back to my pocket or belt.
I like the Emissars Sos. I think I would prefer the titanium myself but either one should do the job. Very nice.I don’t blame you. For me, the Emissar is great for when I want to really light things up and the titanium is nice looking to top it off. My HDS lights are the ones that I know will take whatever abuse I throw at them daily and just keep working.
-
I bought a new flashlight Armytek Wizard Nichia
-
-
My Armytek Tiara C1 has been pretty impressive so far. Very floody and great runtime in moonlight mode.
-
I bought a Fenix PD35 V2.0. I paid little for it because I had an Amazon discount coupon.
I have already had a PD35 TAC for a few years but I have used it little because I tend to use lights with neutral tint.
I always carry a Fenix (TK09 2016) to be used as a self defense.I bought this PD35 V2.0 almost for fun, I was very undecided but after trying it briefly I am happy with the purchase.
There are many differences with the TAC version, the new version has the level selection button with a colored led that indicates the percentage of charge.
The led is always XP-L but this V2.0 has it in the HI version.
PD35 TAC: XP-L (V5)
PD35 V 2.0: XPL- HI V3
Throwing is therefore very different-
PD35 TAC = 10000 cd
PD35 V 2.0 = 15,600 cdThe PD35 TAC has two springs.
PD35 version 2.0 has only one spring :-(
My flat batteries do not work and this light needs a button top battery.The light levels are different:
PD35 TAC:
8 - 60 - 200 - 500 1000 lumens (+ strobo)PD35 v 2.0:
3 - 50 - 150 350 - 1000 lumens (+ strobo)
I wish the levels were identical ..I can approve the level of 3 lumens and 50 lumens to have more autonomy but I would have preferred the medium and high were of 200 and 500 as on the TAC.
Or at least the high level of 400/450 instead of 350 lumens.
There is also a good throw at 350 lumens (6150 cd)
I have not yet used the luxmeter but from the tests I did in a place where I usually test my flashlights I am sure that the declared lux are true .. indeed I suspect that they could be more because this light has a nice throw !I compared it with my TK09 (2016 version) which has a 34 mm head, the TK09 wins (it has 24000 cd) but this PD35 V2.0 defends itself really well !
I tried V 2.0 with a KeepPower 2900 mA protected battery, (from measurements made in the past with an unprotected battery in general there are approximately 1000 cd more)
The holster is painful.
It is of the delicate material that Fenix has been using for some years .. but my disappointment is not only on the material but on the dimensions, it seems too narrow !
I seem to remember that even the TAC version I bought 3 years ago is similar so I don't think it's a production error.The extraction is acceptable but the insertion of the light in the holster is a bad thing.
Fortunately, I bought various Armytek holsters at a low price (that of Armytek Dobermann goes very well with this PD35)The V 2.0 tint (cool withe) is very beautiful.
Neither torch allows the tailstand but this is not a problem for me, in case of need you can always use a tall glass.
Other difference TAC vs 2.0:
The TAC version, it must be said that it has two modes for selecting the brightness (standard and tactical)
In the first way the torch is turned on by the rear button and with the button on the torch body the 5 levels are changed (+ strobe)
Programmed as a tactic, however, the torch always turns on from the rear button but the rear button allows you to change the levels (3) with the sequence: Turbo, 60 lumens, Strobo.
Version 2.0 instead has only the standard mode.The TAC version has less throw but a wider and more comfortable beam for the close distance.
Version 2.0 has a lot more throw but a less bright spill.In summary:
- Torch built very well in every detail.
- Generic battery charge indicator.
- Excellent throw for the type of torch.
- Good tint.
- Total disappointment on holster.
- I would have liked two springs to use flat batteries too.
- I would have liked a few more lumens on the High level (at least 50/100 more lumens)
I hope I have helped someone understand the differences between these two versions of PD35.
Maybe next week I can make a comparison and I will put a video on my Youtube channel. -
Old Peak AA 5-led prototype. Kinda cool.


-
I got my first Olight today. Love it so far.

-
Acebeam Tk16
Not only is this a sweet looking little light; it is also bright, available in HCRI and has a wide brightness range.

-
An Fenix TK15 UE XP-L HI has arrived today.
I still haven't tried it outdoors but in a dark room it looks beautiful.
Only 4 levels, good finishes.
Unfortunately NW is not available, however the cool withe tint at least looks good.
Total disappointment for the holster, all Fenix purchased in recent years have too narrow holsters.
I will be forced to use it with an Armytek holster.
I don't know if I did well to buy in 2020 a light that came out in 2016/2017, maybe this year it will come out in an updated model but I wanted this TK15 UE for a long time.
I have an old TK15 S2 400 lumens (XP-G) used very little and that has a horrible tint :-) but in the past with the old leds this was easy to happen.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login