Why lock blades?
-
Apologies in advance AW but you cannot mention the "insane" knife laws in your country while sipping the exact same Kool Aid

I would love to know how & why a backlock knife is so dangerous?

I have cut myself many times, mostly as a child, and those were slipjoints, or a very memorable incident a rusty fixed blade bait knife on the beach.
Cuts from modern locking folders have been limited to:
- Incidents of stupidity like cutting biltong towards my thumb, the knife did not care that it had Spyderco's compression lock on, it just carried on with the business of cutting.
- Incidents of stupidity playing with a knife like it's a fidget toy,
Sorry if this offends, but simple logic tells me that a folding knife with a lock is better than without, and even if you do not have the manual dexterity to operate a knife one handed (or whatever), you can operate a locking knife two handed just like a slipjoint and use the advantage of the lock without any increased "danger" compared to a slipjoint.
-
@Gerhard Gerber said:
Apologies in advance AW but you cannot mention the "insane" knife laws in your country while sipping the exact same Kool Aid
I would love to know how & why a backlock knife is so dangerous?

I have cut myself many times, mostly as a child, and those were slipjoints, or a very memorable incident a rusty fixed blade bait knife on the beach.
Cuts from modern locking folders have been limited to:
- Incidents of stupidity like cutting biltong towards my thumb, the knife did not care that it had Spyderco's compression lock on, it just carried on with the business of cutting.
- Incidents of stupidity playing with a knife like it's a fidget toy,
Sorry if this offends, but simple logic tells me that a folding knife with a lock is better than without, and even if you do not have the manual dexterity to operate a knife one handed (or whatever), you can operate a locking knife two handed just like a slipjoint and use the advantage of the lock without any increased "danger" compared to a slipjoint.
I fail to see the "insanity", myself, but then again I've always lived in that (daily carry/specific need) two tier system. Back locks (certainly the ones I've ever used) tend to necessitate two hand closing, and putting your hand in the path of the blade, to generate the pressure to depress the backspring and release the blade. Most slippies can be closed safely, one handed. Also, once you've stopped putting pressure in the release area, the tang of the blade is under tension, much like with a slippy, but often greater on a backlock knife. I used to work in an oil rich environment, and that additional backspring force could have me lose control of the closing (or opening) and have the blade and or handle escape my grip. There's also been occasions when I've simply forgot, tried to close the blade like a slippy, and just knocked the blade out of my hand. Operator error, but it's gentler on the ego to blame the knife :D (it seems to work for people who injure themselves with slippies :P) Either way, I'd much rather use a fixed blade instead, which our "insane" laws let me do. To use some of your words, simple logic says it's better to use a fixed blade, than one that's just pretending to be fixed. I can do most tasks with a slippy, but if I want something stronger, I go straight to fixed. There is simply no category of task or scenario, where a locking folder would be the best tool for the job for me. There may well be for other people, but I don't live their life.
-
I preferred slip joints, that's until I discovered the AXIS Lock. I can carry my Benchmade Mini Griptillian on my left side, open it with my left hand, and unlock and close it with my left-hand, all without having to brace it against my leg, as I do all lockbacks and right-handed linerlocks.
-
Certainly, a slippie and a fixed blade (or just a fixed blade by itself) could arguably cover the full spectrum of knife needs, without the requirement for a locking blade.
However, let us (independent of marketing hype) examine potential advantages of a locking blade.
Locking blade advantages vs. slip-joint:
-
Provides some protection against use that might cause a folding knife to fold on the fingers
-
Often provides one-hand opening capability
Locking blade advantages vs. fixed blade:
-
No sheath required
-
Easier to conceal
-
Easier to carry
-
More socially acceptable in some circles
-
May be legal/approved to carry in some locations/locales where a fixed blade is not
I think locking knives have their place in the world today. Like any other tool, their safe and effective use is dependent upon strength of design, quality of materials and build execution, knowledge and skill of the user, and degree of wear.
That said, if I could magically trade all of my locking blades for universal social and legal acceptance of fixed blade carry, I would make the trade.

-
-
@nate j said:
However, let us (independent of marketing hype) examine potential advantages of a locking blade.I think locking knives have their place in the world today. Like any other tool, their safe and effective use is dependent upon strength of design, quality of materials and build execution, knowledge and skill of the user, and degree of wear.

-
I would also logically assume that a knife with a lock would be less likely to bite its owner than one without. However, I can see where a blade from a back locked knife can close on a finger. No locking system is perfect and can fail, but no lock I would think would always fail if one is doing something with the knife that puts force in the wrong direction. On multitools, the lock is even more critical in some regards, especially driving screws or using pointed tools like an awl. Having these items slip can be just as painful as a blade! Like everybody else on this thread, just my opinion! :D
-
That said, if I could magically trade all of my locking blades for universal social and legal acceptance of fixed blade carry, I would make the trade.


-
:D
-
@sak60 said:
That said, if I could magically trade all of my locking blades for universal social and legal acceptance of fixed blade carry, I would make the trade.

Can't argue with that!

@mikekoz said:
I would also logically assume that a knife with a lock would be less likely to bite its owner than one without. However,** I can see where a blade from a back locked knife can close on a finger. **With the brands and general quality of knife we discuss here, that would would be on the user, not the design or the knife.
Lock backs tend to snap shut, just like guess what........a good slipjoint.

-
All folding knives have the "potential" to close on the finger, locks aside.

All folding knives carry this ^^ potential and if one is negligent then thats on them IMO. There is no safe knife folding or otherwise if the user is not careful. Accidents are IMO a whole other topic and cannot be attributed to the knife.
Believing any knife is safe when used without care to me is a user problem and not a problem of the knife. Why blame the object? We are not talking malfunctions or defective knifes as these are not accidents.
If one has the belief that a locking knife cannot fail then they should be using a fixed blade. Yes by terming it "locking" I get users will feel a level of security. If downward cutting just like with a slip joint is applied then I cannot understand how a locking knife can fail?
-
@Aloha said:
All folding knives have the "potential" to close on the finger, locks aside.
All folding knives carry this ^^ potential and if one is negligent then thats on them IMO. There is no safe knife folding or otherwise if the user is not careful. Accidents are IMO a whole other topic and cannot be attributed to the knife.
Believing any knife is safe when used without care to me is a user problem and not a problem of the knife. Why blame the object? We are not talking malfunctions or defective knifes as these are not accidents.
If one has the belief that a locking knife cannot fail then they should be using a fixed blade. Yes by terming it "locking" I get users will feel a level of security. **If downward cutting just like with a slip joint is applied then I cannot understand how a locking knife can fail? **
Ive been thinking about that point, for both locking and non-locking blades. when cutting through something (zip ties, cardboard) where there is something against the back of the knife (the item that you're trying to free up from said substance) and you tend to use a reverse grip and cut towards yourself... I can see how that can be more hazardous with a slipjoint or a lock-back (specifically).
-
@Aloha said:
If one has the belief that a locking knife cannot fail then they should be using a fixed blade. Yes by terming it "locking" I get users will feel a level of security. If downward cutting just like with a slip joint is applied then I cannot understand how a locking knife can fail?This is exactly the problem!
I've seen a cuple of generations now that has been sold a bill of goods by the knife industry that their wonder knives can't fail. Its a very eerie sight to see an index finger laying on the floor, while the blood is spurting out of a severed joint, with he dumb kid muttering over and over again how he can't understand how his Buck knife failed on him. He was convinced that a locked blade was a sure thing. Same thing with my dense son-in-law/ He was overly impressed by advertising like Lynn Thompson with bar bell weights hanging off his Cold Steel lock blades with he blade held in a vise. Its idiotic. But more than that, its a shameful abuse of customer ignorance to over sell an over hyped product with overblown claims.
This has only happened in the past 25 years or so. If a run of the mill sip joint can't handle it, its time to go get a fixed blade as they are called now. Thats what people used to do. But the modern knife industry has pushed these overly hype, overly designed, and overly priced one hand wonder knives on the customers complete with he Kool Aid of the metal brainwashing. Add in the constant overly hyped 'new' wonder steel of the month and you have plain old fissioned snake oil salesmanship. The accidents happen beaus the young guys who buy these knives have never been taught anything about safe knife handling. At all. They' ve grown up with the wonder knives, and they really think that locked blade will never fail and hurt them. Doesn't even come into their minds. At thats the problem; they don't just cut with them like a slip joint. They fall for the highly hyped advertising and use them like a fixed blade. And that is the recipe for a accident looking for a place to happen. Very false feeling of security.
-
I treat a lock blade like a slip joint. But I guess that’s because many folders I carry are on a SAK or older non-locking MT, so I instinctively avoid use that would cause a collapse.
Blade usage is all about adopting safe practice that becomes a habit. Anything else then feels wrong. We all cross our arms in one particular way that’s comfortable for each of us. Try crossing your arms the other way and notice how ‘wrong’ it feels. Same with blades...adopt safe usage, let it become a habit, and you’ll keep you fingers. 👋
The rest is marketing BS.
-
@Max Stone said:
I treat a lock blade like a slip joint. But I guess that’s because many folders I carry are on a SAK or older non-locking MT, so I instinctively avoid use that would cause a collapse.Blade usage is all about adopting safe practice that becomes a habit. Anything else then feels wrong. We all cross our arms in one particular way that’s comfortable for each of us. Try crossing your arms the other way and notice how ‘wrong’ it feels. Same with blades...adopt safe usage, let it become a habit, and you’ll keep you fingers. 👋
The rest is marketing BS.

-
This topic has been interesting to me as a retired safety professional.
I have either investigated or reviewed numerous industrial accidents over 42 years.
The majority of causes were classified as " unsafe acts" . The user was careless , improperly trained, possibly fatigued, impaired ( high) etc.
It appears that most of us agree that knife injuries are a combination of an unsafe act and lack of training.
Locking blades folding knives are here to stay.
Darwin's theory applies to users of either locking or friction folders.
Be careful or get injured, simple as that.
-
@Max Stone said:
I treat a lock blade like a slip joint. But I guess that’s because many folders I carry are on a SAK or older non-locking MT, so I instinctively avoid use that would cause a collapse.Blade usage is all about adopting safe practice that becomes a habit. Anything else then feels wrong. We all cross our arms in one particular way that’s comfortable for each of us. Try crossing your arms the other way and notice how ‘wrong’ it feels. Same with blades...adopt safe usage, let it become a habit, and you’ll keep you fingers. 👋
The rest is marketing BS.

@Marcellus said:
This topic has been interesting to me as a retired safety professional.I have either investigated or reviewed numerous industrial accidents over 42 years.
The majority of causes were classified as " unsafe acts" . The user was careless , improperly trained, possibly fatigued, impaired ( high) etc.
It appears that most of us agree that knife injuries are a combination of an unsafe act and lack of training.
Locking blades folding knives are here to stay.
Darwin's theory applies to users of either locking or friction folders.
Be careful or get injured, simple as that.
I think learning and developing knife safety habit is of upmost importance to any knife user or enthusiast. With all these smooth drop-shut knives nowadays, if you fidget with your knife in a careless manner, accident will happen in time.
-
Darwin and the Peter Principle RULE! :D
-
One thing I like about slip joints. Since most of them have nail nicks they can’t open accidentally unlike thumbstuds that catch on your pocket edge and open as you pull them out like an Emerson wave.
Fortunately I am always aware when I pull out my knife as I have caught it happen a few times.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login