Parts for Upgrade/Repair Leatherman multitools
-
@Syncop8r said:
I wonder if there is a file from another multitool that could be substituted without too much modification.
Or if yours has broken, is sending it in to Leatherman to get fixed under warrantee an option?
Of parts I've looked at, I don't think they have the same profile. I would love to be wrong and informed if there is another Leatherman that has interchangeable tools with the Crunch. Seriously if anyone knows this info, I'd be super grateful to have it.
My file is fine, I just want to make my Crunch bladeless. Ideally I want to have a t-shank blade exchanger where the knife was so I can have a metal jigsaw blade in there, and ditch it if I can't have a blade somewhere. For now though, just replacing the knife with a second file would be fine with me and give me some time to better figure out how to handle the t-shank situation.
I would loathe to buy a second crunch just to start tearing it apart, but I'm tempted. I wouldn't mind having spare parts around, and I'm sure I could come up with at least a couple of uses for it if I had to.

-
@WrenchHeadFox said:
Thanks. Do you have any replacement tools for the Crunch at all? Or I might be willing to buy some other parts alongside the file depending on how much you would need to sell to make disassembly worthwhile.Btw my order would also include the Surge saw/file holder (stainless) and a set of your "lite" wrenches (or preferably the new, longer wrenches if you have any in stock again) if that makes any difference.
I think it will be easier to find a donor for ebay than I disassemble the crunch. I don’t really like to disassemble working multitools, but I don’t have a broken crunch
-
@Syncop8r said:
Not really what you are looking for but it's another option:/post/2060390Hmmm, holding a blade in the locking jaws. An obvious solution I hadn't considered. Perhaps I'll just keep it simple and grind the knife into an awl and call it a day, and fashion a t shank holder that gets gripped in the vise jaws. Thanks for the suggestion!
-
@loki-mobile said:
I think it will be easier to find a donor for ebay than I disassemble the crunch. I don’t really like to disassemble working multitools, but I don’t have a broken crunchThank you for the reply.. I will hunt for a damaged crunch.
Loki, would you be willing to measure the thickness of the Surge blade changer vs the thickness of the Super Tool blade changer? I want to buy one of the two, but have not decided 100% which.
Thanks for your time.
-

@loki-mobile said:
Actual price and availablePliers:
Blast/Fuse/Wave/Charge Ti/AL Pliers - $32
Blast/Fuse/Wave/Charge Ti/AL Pliers Black - $35
Charge ALX TTi/Xti Pliers with CC Black - $35
Old Surge/Core - $38
Old Surge/Core with CC Black- $35Blades:
Wave - $20
Wave Serrated - $20
Charge Ti/Al/ALX (154CM) - $25
Charge TTi/XTi/ALX Serrated Blade with Hook - $25
Charge TTi/XTi/ALX Serrated Blade with Hook Black -$35
Skeletool/Freestyle (Combo 154CM) - $32
Surge - $22
Surge serrated - $22
Surge black - $25
Surge serrated black - $25
MUT - $27
MUT black - $32
ST300 EOD Semiserrated blade black - $28
ST300 Black blade (not new, but excellent condition) - $19
Blast/Fuse blade - $19
ST300 Blade - $18Other:
Wave/Charge saw - $22
Wave/Charge saw black- $25
Wave/Charge file - $22
Blast/Fuse File - $30
Blast Saw - $30
Wave/Charge big bits holder - $15
Wave/Charge/Blast small bits holder - $15
Wave/Charge/Blast/Rebar flat screwdriver - $15
Wave/Charge/Blast/Rebar flat screwdriver black - $17
Blast/Fuse small flat screwdriver - $15
Wave/Charge/Blast/Rebar opener - $15
Wave/Charge/Blast/Rebar opener black - $17
Wave/Charge/Blast/Fuse scissors - $20
Wave/Charge/Blast/Fuse scissors black - $23
Blast/Fuse/Kick phillips screwdriver - $15
Blast/Fuse/Kick phillips screwdriver black- $17
Surge/ST300 awl - $17
Surge/ST300 awl black - $20
Surge big bits holder - $17
Surge saw/file holder - $25
Surge saw/file holder black - $26
Surge scissors - $28
Surge scissors black - $30
Surge/ST300 small flat screwdriver - $15
Surge/ST300 small flat screwdriver black - $17
Surge/ST300 big flat screwdriver - $15
Surge/ST300 big flat screwdriver black - $17
MUT saw - $30
ST300 saw holder - $45 (High price, picked to try & my progect :)
Wingman scissors - $19Hi Loki, been planning some mods for a while and hear your the guy to get parts from
Finally ready to get started
Would like a
surge saw file holder
Surge small screwdriver
Surge mini bit holder? (Looks like possibly out?)How do we do this?
-
@Eriequiet said:

Hi Loki, been planning some mods for a while and hear your the guy to get parts fromFinally ready to get started
Would like a
surge saw file holder
Surge small screwdriver
Surge mini bit holder? (Looks like possibly out?)How do we do this?
all in stock, I write to PM. For reply to PM you can have 5 posts in forum//
-
@loki-mobile said:
all in stock, I write to PM. For reply to PM you can have 5 posts in forum//Well this is number 2 I guess
I was wondering why I couldn’t reply... been forever since I’ve used one of these forumsGlad to hear you have the mini bit holder in stock
I’m hoping to cut off the small screw driver section and weld on a small pin punch... I do a lot of firearm stuff so that’s a must have
Torn on if I really want to install the mini bit since you can use the locking tabs to hold a smal bit, but it just seems nicer (still buying either way)
Which saw file holder is it? Just bought a new surge and it looks like it has a spring arm... does this help with non LM blade wobble I’ve read about?
Any issues or work needed to install it to replace the serrated on a surge?
-
@Eriequiet said:
Well this is number 2 I guess
I was wondering why I couldn%u2019t reply... been forever since I%u2019ve used one of these forumsGlad to hear you have the mini bit holder in stock
I%u2019m hoping to cut off the small screw driver section and weld on a small pin punch... I do a lot of firearm stuff so that%u2019s a must have
Torn on if I really want to install the mini bit since you can use the locking tabs to hold a smal bit, but it just seems nicer (still buying either way)
Which saw file holder is it? Just bought a new surge and it looks like it has a spring arm... does this help with non LM blade wobble I%u2019ve read about?
Any issues or work needed to install it to replace the serrated on a surge?
These are questions you could ask in the mod forum. :tu:
-
Mini screwdrive bit holder for old surge arrived from Loki today, Fits perfectly to new surge , thanks Loki, perfect service , easy transaction

-
Actual price and available
Pliers:
Blast/Fuse/Wave/Charge Ti/AL Pliers - $32
Blast/Fuse/Wave/Charge Ti/AL Pliers Black - $35
Charge ALX TTi/Xti Pliers with CC Black - $35
Old Surge/Core - $38
Old Surge/Core with CC Black- $35Blades:
Wave - $20
Wave Serrated - $20
Charge Ti/Al/ALX (154CM) - $25
Charge TTi/XTi/ALX Serrated Blade with Hook - $25
Charge TTi/XTi/ALX Serrated Blade with Hook Black -$35
Skeletool/Freestyle (Combo 154CM) - $32
Surge - $22
Surge serrated - $22
Surge black - $25
Surge serrated black - $25
MUT - $27
MUT black - $32
ST300 EOD Semiserrated blade black - $28
ST300 Black blade (not new, but excellent condition) - $19
Blast/Fuse blade - $19
ST300 Blade - $18Other:
Wave/Charge saw - $22
Wave/Charge saw black- $25
Wave/Charge file - $22
Blast/Fuse File - $30
Blast Saw - $30
Wave/Charge big bits holder - $15
Wave/Charge/Blast small bits holder - $15
Wave/Charge/Blast/Rebar flat screwdriver - $15
Wave/Charge/Blast/Rebar flat screwdriver black - $17
Blast/Fuse small flat screwdriver - $15
Wave/Charge/Blast/Rebar opener - $15
Wave/Charge/Blast/Rebar opener black - $17
Wave/Charge/Blast/Fuse scissors - $20
Wave/Charge/Blast/Fuse scissors black - $23
Blast/Fuse/Kick phillips screwdriver - $15
Blast/Fuse/Kick phillips screwdriver black- $17
Surge/ST300 awl - $17
Surge/ST300 awl black - $20
Surge big bits holder - $17
Surge saw/file holder - $25
Surge saw/file holder black - $26
Surge scissors - $28
Surge scissors black - $30
Surge/ST300 small flat screwdriver - $15
Surge/ST300 small flat screwdriver black - $17
Surge/ST300 big flat screwdriver - $15
Surge/ST300 big flat screwdriver black - $17
MUT saw - $30
Wingman scissors - $19 -
I am interested in the wingman scissors. Home much for shipping to New Zealand?
-
@IntnlManOfCode said:
I am interested in the wingman scissors. Home much for shipping to New Zealand?Reply to PM
-
Hello,
I am thinking about modding my WAVE PLUS. I would like to have these things fitted:
-S30V blade (from CHARGE TTI?)
-serated blade with hook (from CHARGE PLUS?)
-full size scissors (from WINGMAN?)
-blade exchanger (from SURGE?)
-exchangable file with diamond coating (from SURGE?)
-small flat screwdriver (from SURGE?)
-bit set incl. bit extension
-holster with pockets for bit set, bit extension and small lampCan you help me buying those things? Only the flat blade has to be new.
And one question: Would it be useful changing the pliers?
Kind regards
Shipping would be to EU.
-
I am thinking about modding my WAVE PLUS. I would like to have these things fitted:
-S30V blade (from CHARGE TTI?)
-serated blade with hook (from CHARGE PLUS?)
-full size scissors (from WINGMAN?)
-blade exchanger (from SURGE?)
-exchangable file with diamond coating (from SURGE?)
-small flat screwdriver (from SURGE?)
-bit set incl. bit extension
-holster with pockets for bit set, bit extension and small lampCan you help me buying those things? Only the flat blade has to be new.
And one question: Would it be useful changing the pliers?
Kind regards
Shipping would be to EU.
-S30V blade - out of stock (only 154CM available)
-serated blade with hook - in stock
-full size scissors WINGMAN - in stock
-blade exchanger (from SURGE?) - saw|file holder in stock
-exchangable file with diamond coating out of stock (only saw available)
-small flat screwdriver (from SURGE?) - may be better blast/fuse small scredriver (in stock)?
-bit set incl. bit extension - out of stock
-holster with pockets for bit set, bit extension and small lamp - out of stock (i can add bonus plastic sheath - /topic/83116)And one question: Would it be useful changing the pliers? - Why change the pliers? At the wave+ they are one of the best...
PS You must have 5 forum posts in order to write private messages
-
OK, thanks for your answer, you can also write a private message if you prefer...
So, more questions:
- Are the prices the same without ebay?
- seperate bit extension in black available?
- why small screwdriver of BLAST / FUSE? I want to remove the standard scissors, what would be a good tool instead? Is there some other opening hook or tool fitting?
- What would post and package cost to germany? You only take dollar?
thank you very much.
aj
-
@ajcole said:
OK, thanks for your answer, you can also write a private message if you prefer...So, more questions:
- Are the prices the same without ebay?
- seperate bit extension in black available?
- why small screwdriver of BLAST / FUSE? I want to remove the standard scissors, what would be a good tool instead? Is there some other opening hook or tool fitting?
- What would post and package cost to germany? You only take dollar?
thank you very much.
aj
I can write to you in a PM, but you can’t answer me then
- The prices here are different for ebay (cheaper here)
- I didn’t understand what detail did you mean
- Instruments from Surge / St300 are larger in size from the wave/blast/fuse and they need to be modified to fit.
- Depending on weight, but usually $ 6-10. Preferably in dollars.
-
OK...
- what are the prces then for
-154CM blade
-serated blade with hook
-full size scissors WINGMAN
-saw|file holder
-small flat screwdriver blast/fuse?
- I mean the black version of the bit extender without bit set...
-
You were right, I am not able to answer pm yet.
It looks like I will get another tool and come back to you afterwards...
thanks so far.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
