Gerber Armbar Owners Club
-
This is the "Urban Blue" color version of the Armbar Driver



-
Comparison with a Fieldmaster (Red) and Pioneer X (Blue):



As you can tell, it is about the same size as a Fieldmaster/Huntsman

-
Awl Comparison with the Pioneer X:


-
Perfect size.
Thanks for he photos
-
The bit driver seems to be a sturdy built. Will see how it will handle different scenarios during testing. There is not really a snap when opening or closing any of the tools, besides the blade. When I deploy the scissors or the awl, the other tools come slightly out of their resting position, so there is some tool clumping.


-

The bit holder has a small magnet at its base, making sure the bit won't fall out:

-
The "Hammer". Not sure yet what to make of that yet. I sits flush against the frame when closed, so it should be usable. I think I would use it to hammer a picture hanger into drywall, but certainly not large framing nails into 2x4s. But I also don't think that's its intended usage scenario.


-
Cutting test on regular printer paper:


The Armbar blade does a decent job, I would still give the advantage to the PX. Even more so considering that the Armbar is fresh out of the factory, while I have used the PX a few times.
-
Pry bar test on a paint can:


It works, but it slid out from under the rim a few times. That hardly ever happens with the Vic large screwdriver/bottle opener that I normally use for this task. Could also be that there is a learning curve, as I am used to the Vic method.
-
Because that question will come up: Can you open a beer with the Armbar? I think so:

I did not open it, because it is before noon and there is no event going on in town that justifies a "Fruehschoppen" :D

-
Paracord (550) cutting test:
Armbar with the second snip:

PX with the first snip:

-
Repeated cutting shows a different picture:

The Armbar scissors are clearly not as sharp as their PX counterpart. There seems to be a sweet spot, where they cut pretty well. Too far to the tip and they won't cut it, too far in the back and they won't cut it.PX as expected:

The scissors of the PX also open wider:

Due to the design of the sping, the scissors will get scratched during use. You can see that already in this picture. I open and closed the scissors maybe 20-30 times:

-
These are all the photos and all the testing I have done so far. If you would like to see something else, a comparison with a different tool or another test, just let me know

-
Very nice Sir, I never saw this one

-
Oh great post and photos! I especially like the magnet photo with the bit...that’s usually a hard photo to get. Looking forward to future posts on this one


-

Scissors cutting a zip-loc bag: No issues, almost a push cut.
Weight Comparison:
Fieldmaster: 99 gr. (3.49 ounces)
Pioneer X: 95 gr. (3.35 ounces)
Armbar: 90 gr. (3.17 ounces) -
@SirVicaLot said:
Because that question will come up: Can you open a beer with the Armbar? I think so:
I did not open it, because it is before noon and there is no event going on in town that justifies a "Fruehschoppen" :D

Sooo... No decent beer available, ha? :P
I'd like to see how a regular bit fits in the driver and how good the driver is at screwing some mid sized screws. Is it prone to folding, how is its centering, does it feel like a propper screwdriver or do you feel that your grip is off center as with similar tools?
-
Looks like a good size/functionality ratio.
What's it retailing for?
-
Ha ha! Found you Sir Vic.

Thank you for the great post and pics. I’m sure they’ll be many more joining the club.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


