The Gerber MP1 Thread
-
@LoopCutter said:
@ Clown - Did you start this thread in October 2017, or this year, (2018)?The date and time stamp indicates to me this thread is over a year old, yet the dates are concurrent from Oct 30, thru today Dec 8, 18?
Confused.
Yet interesting review, and disappointd results from Gerber and LM for warranty/quality issues.
Yup, started this last fall (2017) when I got my MP1. Looks like I shelved it after a month or so of use. Thread got resurrected by someone looking for input which reminded me to send mine in for warranty.
-
Found three varieties so far for the MP1. The MP1 Weapons Maintenance Pro(top), Original MP1(middle), and the Maintenance Pro(bottom).
The Original MP1 with G10 handles feels higher quality than the molded plastic handles of the Pro and Weapons versions. But, that said, the Maintenance Pro and AR Weapons versions have the same build quality/fit & finish as the original MP1.

All three share the same pliers head. Finishes vary slightly, but not notably.

Left to right:
Maintenance Pro, Original, Weapons Maintenance.
Pro has driver/cross-cut file, a large hook, and lanyard loop. Original has two flat drivers, and Weapons has carbon scraper.


Pro has a gut hook at the tip of the SE blade and has a more aggressive grind pattern than the OG and Weapons.

Pro and OG have the chisel scraper thingies, while the Weapons has a "pin punch".

Pro and OG have the pry-tool/bottle opener, while the Weapons has the thread mount(with angle pick from factory) for weapons maintenance bits(like pick, brush, etc)

-
@gerleatherberman said:
Found three varieties so far for the MP1. The MP1 Weapons Maintenance Pro(top), Original MP1(middle), and the Maintenance Pro(bottom).
The Original MP1 with G10 handles feels higher quality than the molded plastic handles of the Pro and Weapons versions. But, that said, the Maintenance Pro and AR Weapons versions have the same build quality/fit & finish as the original MP1.

All three share the same pliers head. Finishes vary slightly, but not notably.

Left to right:
Maintenance Pro, Original, Weapons Maintenance.
Pro has driver/cross-cut file, a large hook, and lanyard loop. Original has two flat drivers, and Weapons has carbon scraper.


Pro has a gut hook at the tip of the SE blade and has a more aggressive grind pattern than the OG and Weapons.

Pro and OG have the chisel scraper thingies, while the Weapons has a "pin punch".

Pro and OG have the pry-tool/bottle opener, while the Weapons has the thread mount(with angle pick from factory) for weapons maintenance bits(like pick, brush, etc)

Great pics and comparison Gman! I didn't realise that there's a weapons version. Tools are very similar to those on the efect.
-
@clown said:
It's funny you say that. I had the same issue with an OHT too! Lol. Was so fed up after I finally got LM to send me a good one I ended up selling it. Which is probably what I'll end up doing with this one. So if anyone wants to try out an MP1 and can accept a tiny bit of wiggle shoot me a PM. I'll give you a decent price
Did you ever off-load the MP1 or do you still have it?
-
Apparently after calling Gerber this morning and speaking to customer service agent, I learned this series was discontinued this year. More than likely I am going to buy a MP1 MRO new before they become quite rare to find coupled with often a higher price point.
While I do enjoy using my Center Drive Plus as this is a very well made mutli tool, I can't say I am exactly in favor of spring loaded pliers. With that being said, do you think there is a way to remove the springs without damaging this tool or do you think that would render this tool unusable?
With perhaps few exceptions, brand new this item is roughly $100, so I am very skeptical of modifying a tool that there is no access to replacement parts let alone a warranty service.
-
@CarbideCruzer said:
Apparently after calling Gerber this morning and speaking to customer service agent, I learned this series was discontinued this year. More than likely I am going to buy a MP1 MRO new before they become quite rare to find coupled with often a higher price point.While I do enjoy using my Center Drive Plus as this is a very well made mutli tool, I can't say I am exactly in favor of spring loaded pliers. With that being said, do you think there is a way to remove the springs without damaging this tool or do you think that would render this tool unusable?
With perhaps few exceptions, brand new this item is roughly $100, so I am very skeptical of modifying a tool that there is no access to replacement parts let alone a warranty service.
The MP1(and CD) have the springs inside of the pliers pivot in a hollow chamber. Absolutely no removal. :-\
-
I did sell my CD, so I can´t have a closer but maybe the Diesel Plierhead can be made to work inside the CD? The MP 600 heads will be a bit too thick I guess.
-
On one hand, I have to hand it to Gerber for yet again brilliant innovation, yet in this specific case, I do wish there weren't any springs. As this will mean, you will have to fold this every time and if you are ladder, there is a risk of this falling off.
In my opinion the reason Velcro is used instead of snap closures is likely because of price and timing. While I am nearly 100% certain this is done by a machine, if this costs one penny less and one second less to use Velcro instead of a snap closure, I can completely see any company, not just Gerber using this. Now the Center Drive sheath is exceptional and I really appreciate the fact Gerber produces this in USA and has one of my favorite statements embossed on the sheath as well. That said, I rather Gerber put their time and effort into their tools rather than the sheaths as there is a sizable market for quality sheaths.
-
I'm using the MP1 latelly and have some considerations:
Pliers: Good grip, well made. The point is perfect for fine and precise jobs.
The wire striper is very good. The cutter can cut even the finer wires.
But the pliers is only suited for light to medium jobs.
(The tool flex when squeezed. Not a issue at all. It's necessary only understand the tool limitations).Bit holder: Good in the function. But don't stay properly closed. No snap.
Had to file the G-10 scales to make It close a little better.Blades: Good size. Mine came very sharp out the box.
Pry bar: I submited mine a lot of abuse. Zero problem. Unscatched.
G-10 scales: good grip. But I had to file some points.
Handle Splay: No complains. I have big hands and like spring assisted pliers.
(Sorry for my bad english and for any mistakes)
Overall a good tool. Good concept. But Gerber failed in some points.
Expensive tool for what you get. But I really liked this one.




Enviado de meu moto g(6) usando o Tapatalk
-
Ranger in action to reprofile some edges


Enviado de meu moto g(6) usando o Tapatalk
-
I do like the G-10 scales

-
I'm fan of G-10 look Ray!
Enviado de meu moto g(6) usando o Tapatalk
-
Oh boy - so am I - better than apple pie!

-
Still liking the MP-1.
Using a lot and no issues.

Enviado de meu moto g(6) usando o Tapatalk
-
That is a good looking tool for sure

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
