Camillus Cutlery Memories
-
It's hard, if not impossible to look back at a company 20 plus years after their doors closed and judge their products. Their stock has been sold out, the New Old Stock you see on ebay may well be a retailer's left overs, snatched up during a going out of business sale. You never know what's happened to a used knife even if it looks virtually unused. I read all the time about someone complaining about or sending a knife back because the spring was .003 high or low at half stop. Or it was a tiny bit off center. Those are standards that never existed before. Really what difference does it make if a spring is a tiny bit high at half stop, you don't use a blade at half stop. Knife knuts are becoming a very picky lot.
You have to look back to 1980 to understand why companies went under. Labor costs were on the rise and the modern knife was born, Spyderco, Benchmade etc. were coming out with modern knives with new steels at a low price. Cheap Japanese imports and clones were flooding the market.
The old companies didn't have engineers they had craftsmen that were unable to adapt to the newer designs. There were attempts at modern designs but they failed to understand the new market. Labor costs were rising yet the unions fought to stop new modern manufacturing techniques that would have lowered cost and improved quality. Because it would have meant a temporary loss of employees (aka union dues). Those old family owned companies were also suffering from bad management, that was unwilling or unable to make the needed changes.
Buck streamlined and branched out to modern knives. Case streamlined production and survived, by turning 80% of their production to candy colored novelty knives and collectibles. Now the flood of cheap RR's is forcing has Case to experiment with a line of Chinese made moderns.
In short times changed and the old companies didn't.
-
-
My view.
I live in a free country.
-
It's sad to see the factories close. To see what they once we're and now what's left. Car factories in Detroit. The steel and railroads of my own home state left to rot and fall apart. I'd love to be able to re open the old plants and start making old timers and camillus in the states again
-
Dean51

@Spartan. It would be great to have bought up all the Camillus stuff and relaunch them. Its unfortunate how fickle the knife community is. Its darned if you do and darned if you don't. GEC might have it right? Case is slugging it out it seems and good for them.
-
@Spartan. It would be great to have bought up all the Camillus stuff and relaunch them. Its unfortunate how fickle the knife community is. Its darned if you do and darned if you don't. GEC might have it right? Case is slugging it out it seems and good for them.
I hear that aloha! I didn't know that case was bringing in Chinese knives for their lineup. Does anyone know which ones they are?
-
I think pretty much every cutlery manufacturer still extant in the US has imported lines and or parts. Gerber and SOG, I think are largely imported. Utica, at least what I find in stores here, has a lot of imported lines. Bear and Sons has the Bear Edge line, which is imported. Case has Tec-X. Even Camillus and Schrade, as the original companies, had multiple imported lines.
But, personally, I am not really impressed by what Taylor Brands (now owned by Smith and Wesson, I think) and Acme are doing with the Camillus and Schrade names. The quality seems to scream "bargain bin special" and they all use mediocre steel. Yet, my Rough Riders are half the cost of a Chinese Schrade or Camillus, but 100X better. And it doesn't help that Taylor are taking over the mom and pop hardware store cutlery displays. Our Farm Bureau replaced Case (they were a silver level dealer) with Taylor Schrade. At the very least, they could allow Bear and Sons, Utica, or even GEC to produce some knives in the USA. There were some GEC Schrades, I might add, in 2005-6 based on the Oregon Trapper; done as a special edition. Now, an Oregon Trapper, in Old Timer trim with sawcut bone would look awesome!
In terms of modern designs, I love my Schrade Tough Tool, Cliphangers, and am trading at present for a Lake and Walker. Camillus had great stainless steel, and a ton of modern designs. The LEV-R-LOK was especially cool, and I find the Sierra to be a great workhorse.
-
I still use a Camillus lockback when I go camping. Definitely one of my favorites,
I think it's unfortunate that Camillus fell apart. There are posts in other forums that talk about how they were inconsistent and disorganized in their production,
The Demo knife is an American Classic, which was re-vitalized for a short time recently, and its a shame it hasn't lasted. If the Demo is anything like the Camillus Scout (which I also have, but don't use), the backspring is made of the same hard metal as everything else - making it extremely stiff, hard to open, and prone to breaking. Knowing a reasonable stiffness for a backspring should be very basic for a manufacturer - when there are so few components, they all need to be on point.
-
Case knives and China - I haven’t that...last I heard is Case is USA period.

-
My recently found Camillus Demo knife opens perfectly!
It's not giving me a feeling of being too strong whatsoever
-
It's sad the quality being pushed aside for cheap knives. I've seen a lot of cheap knives on display and fewer quality knives on the shelves
-
@Spartan19 said:
Thankfully the trads are still American Ray, it's just the tech x series of economy linerlocksThanks for the information

-
Thought I would post up some of the Camillus knives I have accumulated over the years.
#1 A 2 blade with celluloid handles and tip bolsters.
#2 A 2 blade ebony handles with a 3line stamp and arched stamp on secondary blade.
#3 A 3 blade with celluloid handles and an unusual manicure secondary blade.
#4 A 2 blade coffin pattern with swirl celluloid handles.



-
Page two
#1A George Washington commemorative knife issued on the 200th anniversary of his birth(1932).
#2 A similar knife without the signature on the handle.
#3 A military issue utility knife from World War 2
#4 A 3 blade with unusual snakeskin pattern celluloid handles.



-
OOPS! Double posted the George Washington knife;here is the unmarked version.
#2 A 3 line 4 blade senator pattern;probably pre-WWI
#3 A so-called,"Red Cross" knife issued by them to soldiers during WWI
#4 A US Coast Guard approved rope knife issued during WWII

-
Page three
#1 A #1 pruning knife with synthetic handles.Advertising on the blade is for Channellock tools.
#2 A #1 with wood handles and lanyard hole.
#3 A # 21 Peanut pattern.
#4 A #23 advertising the Orr Felt & Blanket co.
-
Page four
#1 A #23 without advertising but having a shield.
#2 A #35 trapper with outgassed celluloid handles before repairing.
#3 the same #35 with new wood handles installed and cleaned up.
#4 A #42 with celluloid handles and tip bolsters.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
