Been doing some work in the Wiki
-
^^^ Sure - That's really kind of you - Thank you - PM coming
@Comis - Thanks so much for this - Fantastic addition to the Wiki - I never even knew about those
The series is a very nice companion for the 91mm series - And great designs@enki, Nick4, Mechanickal - Thanks lads - I think/hope it's a big improvement
@enki - PM inbound re file galleries
-
Now there's a question that confuses me,I found a 58mm SAK recently。But I don't know its model. I've never seen any SAK like it,Obviously, it must have been customized by a Swiss food company。I want to include it in SAKWiki, but I don't know if I should create a page for it, or if it should belong to a certain model.If I didn't express my meaning clearly, please forgive my translation software, thank you!
-
@xfile said:
Now there's a question that confuses me,I found a 58mm SAK recently。But I don't know its model. I've never seen any SAK like itI've asked Victorinox about this 'unusual' model (and several ones by the way) few months before.
Accordingly to their answer:This was a special production for a customer in 2017. At this is really a special production, the knife does not have an article number. The knife has got a blade with a round tip and it includes also a little fork.
-
to all of you hard working SAKWIKI peeps. Its one heck of a project/labor of love. Round of cheers to you all. 
-
Thanks Aloha - I'll have a Becks please ;)
Re the 58mm - Very interesting
I don't think it should have its own page - especially as it is a custom with no model number.
But if we add it as a variation where do we put it ? - It's such an unusual configuration.The 'little fork' (Thanks LeaF
) for sure has been known as the divot tool from the golf models .....
Variation of the Caddy? ??? But that blade is very unusual ... and no scissors!It's surprising, for me, that they even made it - As it must have required new tooling in the factory
- Has anyone seen a rounded 58mm blade before?

Or maybe we create a new page (by length) for all custom builds we find
Thoughts

Anyway thanks very much xfile and LeaF for the info on this
- Has anyone seen a rounded 58mm blade before?
-
@LeaF said:
I've asked Victorinox about this 'unusual' model (and several ones by the way) few months before.
Accordingly to their answer:Thank you very much, Leaf!I learned new knowledge, but I don't understand the meaning of customization. 58mm round head knife is the first time I saw it. I don't know what work it will be used for. Anyway, the combination of round head blade and golf tool is really strange.
-
@Huntsman said:
Thanks Aloha - I'll have a Becks please ;)Re the 58mm - Very interesting
I don't think it should have its own page - especially as it is a custom with no model number.
But if we add it as a variation where do we put it ? - It's such an unusual configuration.The 'little fork' (Thanks LeaF
) for sure has been known as the divot tool from the golf models .....
Variation of the Caddy? ??? But that blade is very unusual ... and no scissors!It's surprising, for me, that they even made it - As it must have required new tooling in the factory
- Has anyone seen a rounded 58mm blade before?

Or maybe we create a new page (by length) for all custom builds we find
Thoughts

Anyway thanks very much xfile and LeaF for the info on this
OK, I wonder if this SAK should be included in the Escort model,I think they are similar in terms of thickness and form.
- Has anyone seen a rounded 58mm blade before?
-
@Huntsman said:
Thanks Aloha - I'll have a Becks please ;)Re the 58mm - Very interesting
I don't think it should have its own page - especially as it is a custom with no model number.
But if we add it as a variation where do we put it ? - It's such an unusual configuration.The 'little fork' (Thanks LeaF
) for sure has been known as the divot tool from the golf models .....The divot tool in the golf models seem to have a much wider fork, not the same tool:


So that little fork probably has been developed for this special customer only?
-
Divot tools also was available within other form-factors, including 91 and 58mm models as well
-
I was wondering today whether the 84mm and 91mm combo tools were identical, and the combo tool page on wiki gives conflicting accounts.
see bolded text below:84/91mm Combo Tool- This tool typically replaces the Cap Lifter and Can Opener tools on some knives. The tool incorporates a flat head screwdriver, can opener, cap-lifter (bottle opener), and wire stripper. This tool is noticeably thinner than its Can Opener and Cap Lifter cousins, measuring only 1.44mm in width at the tang. The tool is identical on both 84 and 91mm knives. The earliest versions of the tool did not have a "Half-Stop" to allow the tool to catch for use in the 90 degree position. The tool was officially introduced in 1982 [this date is in question, 1980 seems closer] on 84mm models, and in 1986 on 91mm models. While they look very similar, the 84mm and 91mm combo tools are not the exactly the same. However, an 84mm combo tool will fit in a 91mm SAK, although it sits a little low in the frame, and will need to be drilled out to fit the larger pins.
- FiL
-
@NeleDo said:
I'll just leave this here so one of the editors could use and make a page. Attached photo is mine and you can use it in SAKWiki (the shield on my knife knife is slightly worn, I think I've seen a photo of a BNIB one with the box on the forum, just can't remember where and who posted it). Enjoy!
Lumberjack Big
The Lumberjack Big is 2 layer Victorinox model that includes the large blade, combo tool and woodsaw. It is enlarged version of 84mm Lumberjack with added corkscrew at the back. This model was not produced in large numbers and is fairly rare.
Discontinued and relatively rare.
Layer Tools
• Large Knife Blade
• Combo Tool - Can-opener/bottle-opener/Screwdriver/Wire stripper
• Wood saw
Back Layer Tools
• Corkscrew
• Keyring/Split-ring attachment point
Scale Tools
• None
Scales
Cellidor Economy, no toothpick or tweezers, with hot stamped silver Swiss shield logo
Variations
In 2007 SwissBianco made 20pcs of Lumberjack Big with plus scales and phillips instead of corkscrew.
History
Lumberjack Big is a collectors name for this model as it's unknown if an official name was ever given to it. This model was produced only in 1986 as 3.3311
Physical Specifications
• Length: 91mm
• Width: 15mm
• Weight: 64.5g
Identifiers
• 3.3311 Red Cellidor with no toothpick or tweezers, hot-stamped 'Economy' shield.
Related Knives
• Compact – Scissors instead of woodsaw, with Plus scales, which include the pin; adds the multipurpose hook
• Camper - Similar features, one layer thicker. Combo tool is replaced by small blade, and separate openers; adds reamer.Nicely written. Under related knives I’d add the 85 mm Wenger Basic 66 - it has the same toolset.
Attn: wiki editors. I see an entry hasn’t been made for the Lumberjack Big/91 mm yet - why not?

-
Huntsman: I see several pages with missing images. I thought your changes regarding the gallery structure would have no effect on wiki pages.

-
Probably some other reason. But all links are dead.
-
@Reinier said:
Probably some other reason. But all links are dead.Yup, all links, all images, all galleries, .... It's been like that since yeaterday. I didn't do it si I don't know where to start fixing it, and I haven't gotten any reply to it backstage so I wait. Blindly flipping switches before knowing what happened might make things worse, not better.
In any case, the pics are still there, i found multiple copies of them, we probably just don't have permissions to see them, not even admins. If it's a really big booboo, we can roll back to an older version.
-
Image galleries have been deprecated for a while. Maybe show_image.php simply does not exist anymore

Also, browsing the file galleries results in all kinds of errors.
-
All fixed now. If you encounter any more errors, please report them to some of the staff.

-
Not for me though.
Let me know if I can be of any help. -
Yes, fixed, needed to clear the cache.
Now what was it?

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
