Tiny tiny screwdriver with 4 heads - anyone?
-
Similar to Victorinox thing? I don't have part number handy to find a pic.
Apparently called "Quattro Bit"
-
@Sea Monster said:
Similar to Victorinox thing? I don't have part number handy to find a pic.Apparently called "Quattro Bit"
Thank you for that - I wasn't aware of that one at all. It seems to be belong inside a card or something.
Yes, very similar concept. That one seems to be a bit larger and thinner, but hard to tell just from pictures. Not really important though - there doesn't seem to be much interest in such a thing anyway. Thus I figure I'll just make a few for myself so the work hasn't been total waste of time and call it the day.

-
@Vidar said:
Thank you for that - I wasn't aware of that one at all. It seems to be belong inside a card or something.Yes, very similar concept. That one seems to be a bit larger and thinner, but hard to tell just from pictures. Not really important though - there doesn't seem to be much interest in such a thing anyway. Thus I figure I'll just make a few for myself so the work hasn't been total waste of time and call it the day.

I have one at home. I think it's 2-3 cm square and something like 1.5mm thick.
I think yours would fit on a keychain better and be less likely to damage screws due to how 3D it is. Very practical, I love it!
Only change I could possibly suggest is the larger Phillips could be pozidriv, as here we use Phillips for small screws and pozidriv for large screws. And I hate that! Stick with one or the other!
-
@Don Pablo said:
I have one at home. I think it's 2-3 cm square and something like 1.5mm thick.I think yours would fit on a keychain better and be less likely to damage screws due to how 3D it is. Very practical, I love it!
Only change I could possibly suggest is the larger Phillips could be pozidriv, as here we use Phillips for small screws and pozidriv for large screws. And I hate that! Stick with one or the other!
Well, then there is a fair difference in and sturdiness. We'll see. I'll make one or three and see how it feels.
The logic with Phillips rather than Pozidrive is that in a pinch Phillips can be forced into use on Pozidrive, while the other way around doesn't works less well. Around here it seems to be totally random, although I appreciate seeing more and more Torx. (And then they introduced Torx plus and what not - lots of standards = no standards...)
-
@Vidar said:
Well, then there is a fair difference in and sturdiness. We'll see. I'll make one or three and see how it feels.The logic with Phillips rather than Pozidrive is that in a pinch Phillips can be forced into use on Pozidrive, while the other way around doesn't works less well. Around here it seems to be totally random, although I appreciate seeing more and more Torx. (And then they introduced Torx plus and what not - lots of standards = no standards...)
Standards?

-
@Don Pablo said:
Standards?

Yes, that pretty covers it!

Quite often a substandard standard is preferable to a mess of more/ no standards.
Edit: Not really helped by every country and area having their own standardization institutes. While those largely just rubber stamp each other sometimes they don't - and then you end up with Japanese screwdrivers which are just that little bit too different from PH and PZ to always fit. Not to mention sockets sets where the major international standards decided on different size steps so we all have to have almost every conceivable size in metric for instance.

-
Way too small for me, buddy. I'd need another tool to grip it and get purchase on it, which kind of defeats the purpose. I can't think of any time recently that I turned a screw that was surface mounted, and so loose that this would have been useful.
-
@AimlessWanderer said:
Way too small for me, buddy. I'd need another tool to grip it and get purchase on it, which kind of defeats the purpose. I can't think of any time recently that I turned a screw that was surface mounted, and so loose that this would have been useful.You might very well be right about that. The size thing is a balance act - larger would be better of course, but would also require more turning space above the screw.
I choose 19mm in part because I have some screwdriver laying around here with a รธ19mm diameter handle, and that seems to have the torque work okish for most things. On the usability side I'm primarily concerned about getting a proper down pressure, and not shredding the fingers on that small flat driver. Thus maybe change that small one to a coin driver style.
Anyway, I'll get some hands on experience once I made one. Maybe it should be larger, maybe it should be canned, maybe I accidentally make it into something great or entirely different. (It is called "trial and error" for a reason - "trial and success" never really resonated I guess?)
-
-
[quote author=Vidar link=topic=84071.msg2093361#msg2093361 I choose 19mm in part because I have some screwdriver laying around here with a รธ19mm diameter handle, and that seems to have the torque work okish for most things.
[/quote]... but your not applying force at the same radius, maybe at 1/2 of that...
I agree on the downforce as well

-
@AimlessWanderer said:
[quote author=Vidar link=topic=84071.msg2093361#msg2093361 I choose 19mm in part because I have some screwdriver laying around here with a รธ19mm diameter handle, and that seems to have the torque work okish for most things.... but your not applying force at the same radius, maybe at 1/2 of that...
I agree on the downforce as well

One should be able to get close to the edges, so more than half. But at this point it is just a bit of a wait and see thing - if too hard, then make bigger. Another variant might be too have a sturdy keychain hanger that can double as a little grip and or twisting bar.
I don't know how much I'll bother to fiddle with this though. Like I said I'm on the fence about this thing functionally as it has clear shortcomings, and even if it proves useful it is still unlikely to be any money in making such a dinky thing. I should probably just gold plate it, call it jewelry, and hang it on my wife. ::) Then again sideprojects like this can lead to other better stuff so we'll see. I'll make one or two at least and take it from there.
-

-
The beauty of prototyping is you can try out one version, and that may lead to ideas for a better version.....rinse & repeat and see how you go.

-
Looks a lot like the Gerber GDC Zip driver, although a cleaner, nicer design.
Personally, I prefer a bit more grip (and size), though I have used the SwissCard 4-way-driver on children toys and I think that is about the scope of what you can reasonably do with such a small tool (maybe fix your glasses, although in 40 years of wearing glasses I never had to adjust mine and I usually wear the same glasses for 5 to 7 years).
Looks like a fun project
-
Dang it, another one - and one even more similar... This is getting embarrasing!
I guess I really should check around more before stepping out of my usual stuff. ::)Edit: Well, this was a bit on the fence to start with, and this is starting to look very much like a me too thingy. And I'm certainly not about that, so I'll have a little brain reshuffling here. The basic concept, a tiny driver, seems like a fair enogh proposition, so some more iterations in random directions might be in order.
-
It looks very nice Vidar. I should imagine it would be very useful in an emergency and at the very least it's waaaaaay better than the Tread.
I love the back and forth you have demonstrated on this. Questioning the practicality etc. If only you'd been part of the Tread design team

-
@magentus said:
It looks very nice Vidar. I should imagine it would be very useful in an emergency and at the very least it's waaaaaay better than the Tread.I love the back and forth you have demonstrated on this. Questioning the practicality etc. If only you'd been part of the Tread design team

The practicality was my main gripe with this and the reason for posting in the first place. It was also why I had no plans on doing any paper work on this one, and thus could post early. (Usually the dilemma with paperwork like registered designs or patents: I do want broad feedback as early as possible, but any early publishing prevents getting the paperwork later). I thought of it mostly as a fun little concept to quickly check out.

The replies have been very useful, so thanks to everyone for that! As a small update it has lead to other solutions which again has been massaged further. Still tiny, way more practical, but also on the expensive side. (Which actually might just make it a viable thing to do). That one I likely want to do the paperwork on though, so I can't show you all yet.

-

-
@magentus said:
It looks very nice Vidar. I should imagine it would be very useful in an emergency and at the very least it's waaaaaay better than the Tread.I love the back and forth you have demonstrated on this. Questioning the practicality etc. If only you'd been part of the Tread design team

+1
I was thinking a keychain like holder would make it more usable, even before seeing the 2nd pic. Love that one! I think it's way better than the Quattro and with a small cut in the metal holder, it can be a bottle opener, too!

Here's the Quattro:
/topic/79977

-
@pfrsantos said:
+1I was thinking a keychain like holder would make it more usable, even before seeing the 2nd pic. Love that one! I think it's way better than the Quattro and with a small cut in the metal holder, it can be a bottle opener, too!

Here's the Quattro:
/topic/79977

Works has progressed quite nicely on this little sideproject, and it has turned into an interesting little screwdriver. I considered adding a blade for the occasional opening of packages and what not, but with laws around the world going crazy over even tiny utilitarian blades I chose to stick to screwdriver only.
It will likely be silly expensive though - this was a little sideproject and part of the fun was saying smurf it to normal cost considerations. It is all the more unique for it.

I look forward to showing it here in the not too distant future

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better ๐
Register Login