Gerber Mr. Pinchy Multi Plier Club
-
Thanks hiraboo,
also for all the info you're providing about them.
Very interesting and appreciated
Btw, did you ever take the tool implements out of the handles?
Do you know how the tools pivot screws look like maybe? -
Thank you hiraboo (ʃƪˆ▿ˆ)
-
McStitchy
To take the tool implements out of the handles, you need to use 1/16 inch hex wrench.
Usually, one screw is tight, and the other is a little loose. So you can loosen one side easily. But the other screw does not loosen because it runs free.
Opening one implements halfway, you can add tension to the center shaft.
Now you can prevent the screw from running freely. Let's loosen them.
If your Mr. Pinchy has round nuts instead of button head screws, it is easier to loosen the screws.CAUTION
***From here, a very grotesque image follows. ***(´ж`;)
If you are eating, or you have a heart disease, please do not watch.
When removing the pliers, you need to use 3/32 inch hex wrench.
I made these small tools from a paper clip to disassemble the pliers head.
I don't want to imagine what cause this messy thing... (;´д`)
All I need is clean up!
Fini ━━━━ヽ('∀`)ノ━━━━ sh !!!! -
Wow... thanks a million Hiraboo !

That's exactly what I was looking for
That explains why I couldn't tighten the tool implements play on one side.
It looks like the "pivot-barrel" is a tiny bit too long as it's on full contact already. -
Oh boy, that’s like night and day! Thank you for the photos and explanation

-
Nice job on cleaning up that Mr. P hiraboo !

-
-
Mr P in the house :D

A little rust here and there but otherwise in unused condition. I removed the plier head to clean it up and may do the same to the tools although they are mostly clean after soaking in WD-40.
Love how compact this is and it fits in an OG Supertool leather sheath perfectly. Even self deploys when you slide it out of the sheath

-
That's a great find Steve

-
Mr. Pinchy got me the other day. Not in the usual spot though. My fingertip got pinched between the can opener and back spring when openning it up.
Got a nice little blood blister for my troubles.

-
:ahhh
... that's a very creative way of doing it Steve

-
@McStitchy said:
:ahhh... that's a very creative way of doing it Steve

Sometimes you have to think outside of the box ;)

-
SteveC
I like your photos very much cause the Mr. Pinchy looks much cool.
Looks painful! o(;>△<)o
I'll handle my MP carefully not to hurt myself.As mentioned before, I am trying to classify Mr. Pinchies using the method
originally advocated by J-sews
/post/36032and developed by gregozedobe.
/post/928733Dear gerleatherberman has named this work "Pincheology."
/post/1986225I found some new MP models to be classified. I will introduce them to you, and revise the chart. Before that, please see classification table in my previous post.
・About Pliers Classification, Appearance
・About Other Tool ComponentNow, time to Pincheology!
New items
・The V2.0 with A Parallel-Processed Can Opener Craw
Almost all V2.0 have a slanting-processed can opener craw. But this MP has a parallel-processed can opener craw.
(Please tell me if there is more suited name of this processing method/shape of craw.)There is a MP(already listed) having same component except for the wide handles-gap.
By the way, I have thought handles-gap had widened when pliers changed P-2 type to P-3. So, I think the above right model is an irregular model with P-2 pliers and wide handles-gap.
But looking closely, I think pliers seems slightly different between these MPs.・The V2.1 with A Slanting-Processed Can Opener Craw
The patent on the serrated blade side is marked with a slightly large font.There is a MP(already listed) having same component except for the can opener craw.
・The BO V4.1 with P-6 Type Pliers
The M-3 type patent marking on the serrated blade side, The M-4 type on the drop point blade side.There is a SS MP(already listed) having exactly same component.
・The FISKARS Model with P-8n Type Pliers
There is a FISKARS model with P-4 type pliers(already listed) having same component except for the utility blade/can opener.
Left → Right
・ A FISKARS model with P-4 pliers
・ A FISKARS model with P-8n pliers
・ A V5 needle-nose model with P-8n pliers
・ A V5 needle-nose model with P-8N pliersThere is another FISKARS model reported by m47mu74nt.
[HELP] Identification : Fiskars Pliers
It is resemble the V5 blunt-nose model with a P-8B pliers. It have a utility blade instead of a can opener.・The V1.2 with Two Handle Cut-Outs, Thin Lanyard
Despite Greg's report of this model, I doubted if it really existed.
I'm sorry Greg, you are right!
Let's compare another V1.2 model with one handle cut-out.
Upper ) V1.2 with one handle cut-out
Lower ) V1.2 with two handle cut-outs
Left ) V1.2 with two handle cut-outs
Right ) V1.2 with one handle cut-out
The two handle cut-outs model have a thin lanyard with a spacer. Another all V1 model have a thick lanyard.And now I revise the chart.
-
@hiraboo said:
・The V1.2 with Two Handle Cut-Outs, Thin LanyardDespite Greg's report of this model, I doubted if it really existed.
I'm sorry Greg, you are right!Thank you hiraboo for your continuing contributions to MTo knowledge

I had no doubts about the existence of this particular early Mr Pinchy, as I have 7 examples of it. :D ( I have a fairly extensive collection of V1.x Mr Pinchies)
All have the "thinner" (but still fairly thick) lanyard loop, matched nail nicks, and the angled machining on the can opener.
I am unable to post photos of my MTs, but am happy to answer all reasonable questions

-
Greg
Thank you very much!

@gregozedobe said:
I had no doubts about the existence of this particular early Mr Pinchy, as I have 7 examples of it. :D ( I have a fairly extensive collection of V1.x Mr Pinchies)All have the "thinner" (but still fairly thick) lanyard loop, matched nail nicks, and the angled machining on the can opener.
I am unable to post photos of my MTs, but am happy to answer all reasonable questions

That’s amazing! Σ(・ω・ノ)ノ
Of course I have countless questions about your entire collection and knowledge.
I have so many questions that I can make a book. ('-^)b -
Great work!

Also, :o
How thick is that lanyard loop? :ahhh
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

