My half tool knife...
-
Thanks Peeps! Some minor changes to the tools to suit requirements at work. Had always wanted a dedicated T25. 

-
Giant diamond file added! The diamond file was quite a pain to work with.... The metal is not exactly hard but I have trouble cutting through the diamond coating with my dremel cut off wheel and I dun have access to a angle grinder... End up I have to snap off the blade.. That's when I realize the steel was not hardened, so drilling the pivot hole was a breeze. Shaping it was another issue as it ate up and was damaging the stone on my bench grinder... Cheap-ish diamonds, but still beats grinding stone... Really pleased with the end result!

-
Nice size files Sam

-
This this Sam really nice mod, I'd love to have a go at it myself. Great concept and excellent tool

-

This is awesome. I think i'm going to have to try something like this.
Re: The liner lock for the Screwdriver bit on the plier axis.
Did you just pull the side tab for the saw side of the the handle inward? id love to see some more pictures. -
This is awesome. I think i'm going to have to try something like this.
Re: The liner lock for the Screwdriver bit on the plier axis.
Did you just pull the side tab for the saw side of the the handle inward? id love to see some more pictures.
Actually, if you look closely at the last 3 pics of the OP, you will see an addition frame on the inside that forms the liner for bit driver. Alot of fitting to be done to get it to sit correctly. Have fun! -
Oh wow, Sam :o You always amaze me with your mods :ahhh It seems I always say that with the stuff you build

Love the big file and the assortment of tools you seemed to have fit in that thing 8) May be time to upgrade my Charge knife
:D -
@Poncho65 said:
Oh wow, Sam :o You always amaze me with your mods :ahhh It seems I always say that with the stuff you build

Love the big file and the assortment of tools you seemed to have fit in that thing 8) May be time to upgrade my Charge knife
:DThanks P. Feels good to be able to customise the load out to daily needs. Had wanted the large diamond file all along.

-
Another great mod by the master !

-
A little bit of walk through on the bit adapter on the plier's pivot. Pretty low tech mod with basic tools. Done with a dremel with cutting wheel and a hand drill, nothing fancy. Anyone should be able to do it with some basic experience with them. Just some patience and quite a bit of cursing.
First off, the original one was a prototype cut out from a broken wave's frame. Due to the lesser material on the bit adapter ( Surge sized ), there's the very irritating half stops as it can't hold down the liner till it engage to lock. Btw, the pivot size on the bit adapter is smaller so you will have to enlarge it.
Wave prototype vs the new liner. Note that there's a tiny "U" shope notch at the bottom end. I will explain later.

The piece is a cut out from a OG ST frame. I have tried bending the back lock of the ST's frame for the toughness so I know it will not snap when I bend the liner later. "Redesigning" from ground up allows me solve the half stops problem. ;)

Preparing the bit adapter to engage the liner. It have its own safety stop so it will not over extend. This part of the mod is the most painful.... It takes a darn long time to get it perfect... Go slow.. it's a one time chance, if not you will have to start all over again.


Once I am happy fit the fitting, Its time to assemble the tool together. :). The safety pin thing have to be removed to accommodate the liner. Its useless in this instance. Remember the "U" notch? Thats where the Liner will secure onto the frame by replacing the rivet that holds the safety pin and the locking spring with a tiny screw.

How mine sits when stowed.

If everything is done correctly, you will have a perfectly straight bit driver!! Easy as pie.


Have fun!! Took me bloodly 5 hours to get it done! -
Easy as pie for the master ;)

-
Nice work Sam

-
Thanks for showing how you built that liner lock Sam! Seeing this has given me a lot of ideas. Hope I have some time to work on them soon.
Cheers!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login