Free P4 pliers stiffness after moderate or heavy use
-
My P2 is on it’s way back to the importer. I’ve asked for a Wave as a replacement but they told me that’s not possible. I guess the replacement P2 will be sold unused, I’m done with this.
Makes you wonder, I have an old PST that I’ve used fairly hard for three decades and it still functions fine. Newer isn’t always better.
-
I'm not sure what to think
. If as it seems LM is content to lean on their warranty then this is really unfortunate. Makes you wonder how many have to come back for them to fix problem and not lean on warranty
. -
A fair amount of users will never crank down on them so hard that they’ll bind the pliers, so the number of returns could be limited. Either way, it’s disappointing.
-
and yep 
-
@nitram said:
A fair amount of users will never crank down on them so hard that they’ll bind the pliers, so the number of returns could be limited. Either way, it’s disappointing.I am not too sure about this, after seeing Max's video, I just seriously just give it a firm hand shake, and it starts to bind a little. I have absolutely no doubt if I were to use it to cut something like a nail or wire, even well within its capacity, it will bind for sure. Though as a collector, I do have many pilers to choose from for that task, but it kinda sucks to know this expensive tool is not up to par like other brands.
-
I pulled out an example of each of my newer Leathermans yesterday. My newest the Charge plus showed symptoms of this when squeezed tightly but eased back off with some wiggle of the handles. My next newest, the Wave did not do this. Neither did my Rebar , Blast or Kick.

-
I don't have a Free Series Tool but I have several LMs. None have experienced this binding. Yes some were tight when I got them but they loosened with use, not tightened.
I'd imagine a fair amount of users will not rouble themselves with returns, thats just how some are. Then there are those who merely collect so they'll never user the tool. I'm sure there are those who carry but very lightly use the tool. This is more accurately why I wondered how many will actually be returned.
Everyone who has one go now a give it a "hand shake" and see if yours binds up. Then send it in so LM can hopelfully address the issues.
-
@Aloha said:
I don't have a Free Series Tool but I have several LMs. None have experienced this binding. Yes some were tight when I got them but they loosened with use, not tightened.I'd imagine a fair amount of users will not rouble themselves with returns, thats just how some are. Then there are those who merely collect so they'll never user the tool. I'm sure there are those who carry but very lightly use the tool. This is more accurately why I wondered how many will actually be returned.
Everyone who has one go now a give it a "hand shake" and see if yours binds up. Then send it in so LM can hopelfully address the issues.

... and tell them that if they send a replacement, to test it first by squeezing the pliers, before sending another tool with exactly the same issue... ::)
Has anyone taken this problem to them on social media yet?
-
Sad all this about the "P" series.
Out of LM's, I had a Gerber Flik for ten years. I used it contless times to cut stainless steel wire for welding. Zero problem. Hope that LM solve this problem ASAP
Enviado de meu moto g(6) usando o Tapatalk
-
Reading thru this thread is like watching a horror show. Luckily the only Free I have is a T4. The email LMT rep told the customers how to fix / try to fix the tool themselves is beyond F**k up. The proper thing they should do (for now) is to offer free return for warranty and a nice voucher as a gesture of good will.
-
Is it possible the problem is with the elongated toggle pivot in the handles? They seem to have the ends cut similar to a bone shape, and when squeezing tightly could the be displacing the pressure into the bottom of the pliers where the separate jaws attach to the handles?
-
Not sure I follow you stugumby

Mine now back with the LM rep, and with national lockdown, who knows when I see it (or replacement) again.
-
WOW
Where to even begin
I don’t own any of these newer models but lockdown boredom has had me spending way too much time web surfing.But having just read this thread, hand on heart I will steer clear of these models.
I can’t quite understand why leatherman don’t simply outsource the plierheads to “proper” tool makers. All LM pliers suck
Leatherman are best just stamping out parts and assembling. Clearly after 30years They still can’t get the heads right.
The irony for me is that the main difference between SAK and MT is the the addition of the plier head.
If that’s not upto the job...what’s the point?I never use MT’s- tho’ edc a Gerber Balance at work for the screwdrivers and tweezers the rest of the tool is utter smurfe.
None of LM’s carry tweezers (wood/steel splinters)
I think LM really ought to pull the stops out and finally deliver a “real tool” it’s a bit embarrassing TBH
God knows their prices are already high enough to expect better.
-
Do you need a hug, tosh?
-
@hiraethus said:
Do you need a hug, tosh?Why? Are you offering 💕💕 swoon
-
:hug: get in here
-
@tosh said:
WOW
Where to even begin
I don’t own any of these newer models but lockdown boredom has had me spending way too much time web surfing.But having just read this thread, hand on heart I will steer clear of these models.
I can’t quite understand why leatherman don’t simply outsource the plierheads to “proper” tool makers. All LM pliers suck
Leatherman are best just stamping out parts and assembling. Clearly after 30years They still can’t get the heads right.
The irony for me is that the main difference between SAK and MT is the the addition of the plier head.
If that’s not upto the job...what’s the point?I never use MT’s- tho’ edc a Gerber Balance at work for the screwdrivers and tweezers the rest of the tool is utter smurfe.
None of LM’s carry tweezers (wood/steel splinters)
I think LM really ought to pull the stops out and finally deliver a “real tool” it’s a bit embarrassing TBH
God knows their prices are already high enough to expect better.
Pretty broad statement there tosher. I would have to disagree with that statement. I have almost 30 year old PST's that are working flawlessly. Supertools ,Blast , Waves, Surge and Rebar all work exceptionally well. I can't speak to the Free pliers but it sounds like they have issues.
-
@SteveC said:
Pretty broad statement there tosher. I would have to disagree with that statement. I have almost 30 year old PST's that are working flawlessly. Supertools ,Blast , Waves, Surge and Rebar all owork exceptionally well. I can't speak to the Free pliers but it sounds like they have issues.That’s fair enough Steve
But for me personally the LM plier head is the Achilles heel on the whole LM line up . I don’t understand why they don’t just outsource the manufacturing of plier heads to proper tool manufacturers.It’s no secret I hate LM pliers, it’s the reason I refuse point blank to edc a LM
For me, the LM heads are a joke.
You are welcome to your views as am I.Maybe one day LM will produce a “proper” tool, until that day arrives..if ever, LM will be nothing more than a gadget, maybe of use to some....but for me and work colleagues just a ridiculously overpriced gadget.
I own probably 100+ LM’s, so I’m perfectly within my right to have my own personal view.
Each to their own. If it works for you that’s great.
-
I didn't realize you disliked LM Tosh
. To be clear its the plier heads? I've purchased the vast majority of mine used and never had one issue that comes to mind. Stiffness I've had but its always worked itself out and not anything like whats being reported by the OP on the P4 or what others have reported on other LMs.I'm going to take a guess and say you've tried enough to be firm in your view? While I admit I have limited experience with the new LMs my use of mine over years has not been similar to what others experience.
I've hammered, I've torqued, I've pushed mine pretty hard for a MT and I'm convinced mine are not only capable but dependable.
Bummer for all who experienced plier issues but I tend to not write off a brand in general. There are some really good tools IMO that LM has produced.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
