Been doing some work in the Wiki
-
Here's some more info on Victorinox Hunter Pro series I've found that editors can use to update the page.

Hunter Pro 130mm/136mm
History/Release dates:
April 2013 Hunter Pro black
September 2014 Hunter Pro orange
September 2015 Hunter Pro Wood (walnut handles)
September 2018 Hunter Pro M Alox (silver alox, OH blade, lanyard hole and smart clip)
January 2019 Hunter Pro Alox (red alox, two hand opening blade, lanyard hole and smart clip)
January 2019 Hunter Pro Wood (walnut handles, two hand opening blade, lanyard hole)
Also, in January 2019 first three versions of Hunter Pro released 2013-2015 (black, orange and Wood) were replaced with suitable Hunter Pro M versions (same knives but have spring integrated lanyard hole added). Naming and numbering also changed (M is added both in names and model numbers for models with OH blade).
Physical Specifications:
Length: 130mm Initial models (discontinued since January 2019), 136mm new models (with spring integrated lanyard)
Identifiers:
Initial models, 130mm:
0.9410.3 Victorinox AN: Hunter Pro, Black DD handles
0.9410.9 Victorinox AN: Hunter Pro, Orange DD handles
0.9410.63 Victorinox AN: Hunter Pro Wood, Walnut handles
New models, 136mm:
0.9415.26 Victorinox AN: Hunter Pro M Alox, Silver ribbed alox handles, one hand opening blade, spring integrated lanyard hole and smart clip
0.9415.20 Victorinox AN: Hunter Pro Alox, Red ribbed alox handles, two hand opening blade, spring integrated lanyard hole and smart clip
0.9411.63 Victorinox AN: Hunter Pro Wood, Walnut handles, two hand opening blade, spring integrated lanyard hole
0.9411.M3 Victorinox AN: Hunter Pro M, Black DD handles, one hand opening blade, spring integrated lanyard hole
0.9411.M9 Victorinox AN: Hunter Pro M, Orange DD handles, one hand opening blade, spring integrated lanyard hole
0.9411.M63 Victorinox AN: Hunter Pro M Wood, Walnut handles, one hand opening blade, spring integrated lanyard hole -
Thanks for this Nele - All done - Not quite as you prescribed - Just some minor variations!!
That's a pretty major revision - And I think it looks great!!
-
Ah thanks mate - or should I say boet ;) - It's all down to your input and prompting

I had forgotten about the sheath - So it's in there now.
-
Was just looking at the ‘Artisan’ page ???
I’m not sure what all the fuss is about the Craftsman naming. There’s PROOF that it was. And only very thin hints that it was ever named Artisan.Please explain the issue.

And the ‘in certain markets’ aside comments

-
It's a unique toolset.
Giving it a "Craftsman" name would make things even more complicated thant they already are. No? -
@Mechanickal said:
It's a unique toolset.
Giving it a "Craftsman" name would make things even more complicated thant they already are. No?No. Revisionist history is more complicated.
**Seriously, show me ONE catalog cut from ANY market that shows a 136ka with an ARTISAN label. **
-
I'm not trying to point out to catalog names.
Victorinox has made a mess of names and model numbers in the past.
Some knives didn't even get a name or got a recycled one.If we have to follow Victorinox' way of naming, we'd have to remove all pages, use model numbers exclusively and add the names under those model numbers that Victorinox once used for them.
I'm not questioning you being right here, because I know you are.
But it's not a matter of being right but rather of keeping the information accessible and understandable.If that means a certain knife gets a name that might not have been used in a catalog, so be it

Same thing for the Alumnus by the way.So I understand your reasoning and I agree with what you are saying, but I also hope you understand that the Wiki needs to be clear and accessible to everyone ;)
-
Nick- go look at the edit history. I’m not talking about the page name. I’ve already agreed it has to stay.
-
Will do! I must have misunderstood somewhere then...
-
@kamakiri said:
Was just looking at the ‘Artisan’ page ???
I’m not sure what all the fuss is about the Craftsman naming. There’s PROOF that it was. And only very thin hints that it was ever named Artisan.
Please explain the issue.
And the ‘in certain markets’ aside comments
Hi KK,
Thanks for you input and comments
I don’t understand what you mean by “all the fuss is about” - What fuss? - And for me, there are no issues (to explain), although I think ***you ***seem to have some issues with the page!
However, I can explain the updates I made – I’ll just concentrate on the updates relating to name, as these seem to be the ones to which you are objecting.
-
I created a Name Disambiguation section in line with other Wiki pages (I assume you are OK with that) and put some text that was already in the page into that section - with some minor alterations.
-
I took out the "for decades" comment as, whilst two decades is plural, the expression ‘for decades’ gives the impression of many, many decades, plus the expression* "was originally named "* covers all time from initial availability to the name change
-
I put the *"(in some markets?)" *statement after “This model was originally named the Craftsman” because the only catalogue pages I have seen (which are the ones in the Wiki) that call this model a Craftsman are all from **US **catalogues (- or should I say catalogs!). So, I believe that the comment in brackets and with a question mark, nicely indicates this fact, and possible uncertainty/geography.
As I think you know artisan is French for craftsman. So, for instance, are you sure that this model was called the Craftsman in France (a country notorious for resisting English words)? or even Switzerland? which is 25% French speaking, the rest being predominantly German speaking, or even the UK?
We know that Vic names were not standardised (to English), and across the globe, until the mid-70s – And that the Craftsman name was used for the 91mm model from that time. And, for sure, we did not have the global economy, or even such pervasiveness of English, at that time, or prior to that.
We also know that the 4-layer 84mm model was called the Artisan in some markets. This is from catalogues and knife boxes, the Wiki page mentions this and there are some threads in MT.o about it too.
All this is nicely explained in the Artisan page - top and History sections, and some of it is also mentioned in the Craftsman page.
So, I think the page looks good and explains what we know for sure quite well.
And the phrase to which you are objecting - if I understand you correctly - is in brackets and with a question mark - So hardly explicit or directive.I hope that makes sense and addresses your concerns and issues.
If you or anyone else knows any more or different than this, or has suggestions to improve the page - Please chip in
What might be nice - Is to include your pic of all the Craftsmen from the Craftsman Love thread - in the Craftsmen pages - Can I do that?
-
-
That’s a ‘No’ for use on the old posted pictures. I was getting back to this page to see what I would include and re-shoot.
We also know that the 4-layer 84mm model was called the Artisan in some markets. This is from catalogues and knife boxes, the Wiki page mentions this and there are some threads in MT.o about it too.
Actually I’ve seen ZERO proof on this note. AFAIK, the Artisan labels were only used on the 6 layer models and for BOTH Craftsman and Handyman models. And the comment about the ‘76 US Dealer catalog is wrong, if you take the time to look for yourself.
From what I can tell, boxes left Ibach with the English stamped versions. Some with both the English name and number code. Sure, they were likely for the US market, but not sure what the Smurf your point is with the ‘in certain markets’ comment.
-
@Huntsman said:
I don’t understand what you mean by “all the fuss is about” - What fuss? - And for me, there are no issues (to explain), although I think ***you ***seem to have some issues with the page!Yes, as I’ve said before, I DO think the page still needs fixing.
By ‘fuss’, I mean I don’t really understand why you’ve felt the need to edit what I put in there. Despite your explanations above, those comments are just your opinions on the matter and everything I posted is based on fact.
-
When the foul language filter has to step in, then you're using the wrong kind of arguments

Boys, I think it would be best to take this discussuon to PMs where you can agree or agree to disagree.
As for the wiki ... when ICFT and I were doing most of the work, we also had differences of opinions like you guys have. So we decided to split the work. He got Vic, I got Wenger. That's why you see me mostly in those pages. Find a way to split work so you don't step on each others toes
-
I manually typed ‘smurf’. Is that not allowed?I think that’s not a bad suggestion about the split. Calling dibs on everything that’s a 136x variant. ;) :D

-
Can't really add anything more useful than what Enki just said.
I've seen my own written texts being altered to something I didn't think of.
In the first instance, it feels... A bit shocking. After reading it through though, I could only admit it turned out better.Different opinions and personalities tend to crash sometimes, but that doesn't mean an entire battle has to be started over it.
So take a deep breath, take a step back and look at this from a distance...
Is this really worth the tension and harsh discussion??
It's SAKwiki ... Made by people way more knowledgeable than me. I don't know alot about the history of SAKs, and the things I do know have been picked up from there.But let's make one thing clear:
What a single individual has or has not seen does not make it a fact or a lie.
Please, just listen to each other and try to LEARN from each other instead of trying to figure out who is right. Maybe you both are, maybe none of you are.But that's for you guys to figure out :D
:hug:
Keep the family together guys! -

Just found this on the Master Craftsman Small page.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


