Knife Snobs?
-
I’ll freely admit to being a Vic fanboy, but I’d never look down upon or denigrate some one because they chose a different knife than me. That’s just stupid.
We all have different wants and needs and fortunately also have lots of options to fill them.
-
@ElevenBlade said:
2. Are you supposed to have that thing?LOL!
IMO the reason to carry a SAK is that you won't scare too many people using it in public. A 4" OTF with a blacked out S35 blade...thats another story.Most of the knife snobs I have encountered were more like "You carry a production knife? Lame, mine was hand made by XYZ famous knife maker and cost $2300."
Though admittedly in elementary school the few SAK kids gave the few Wenger kids quite a hard time.
-
Me too Jack, and I've not been let down yet! I'm the oddball here in that I like Spyderco, it can't tell you anything about the steels. For a kid that grew up in Southwestern Pennsylvania that's probably not a good thing. I like them for the fact that they are fairly lightweight, durable, and the company is law enforcement friendly. I know they're out there, but I haven't met any more snobs there than I have in any other knife owner's group. I think it's just people thing. Some folks just get too caught up in the details and forget that this is probably the dumbest hobby there is.
@Nix said:
I've got a Knife-snob streak in me. However, over several decades of knife use, I've come to the conclusion that knife snobbery is completely unwarranted.
Most days my fancy knives stay at home and it's a SAK that is carried. SAK's are too useful to not carry one. And that usually makes a secondary knife redundant. So, the default pocket knife is the ubiquitous SAK. Appropriately so, says I. -
@sixracer said:
...IMO the reason to carry a SAK is that you won't scare too many people using it in public. A 4" OTF with a blacked out S35 blade...thats another story.I’m always intrigued about other people’s work environment when I read statements like this.
I teach high school in rural Kentucky, and if I whipped out a (insert murdery tacticool knife here) to trim my fingernails in the middle of a faculty meeting nobody would bat an eye.
Then again, our school resource is also my gunsmith. Life is good here.
-
One thing that's clear to me after being a member here for many years, is that we all have different priorities.
For some it's edge retention
For some it's ease of sharpening
For some it's affordability
For some it's exclusivity
For some it's reliability of lock
For some it's the absence of a lock
For some it's speed of deployment
For some it's ease of carry
For some it's being tacticool
For some it's NOT being tacticool
For some it's patriotism
For some it's xenophobicEach of these priorities, and many others not listed, will look odd to people of different perspectives. The "snobbery" comes in when the narrow minded think that their priorities should be everyone's priorities, and see knives in a simple linear progression of worst to best, exclusive of anyone else's preferences and priorities. They're usually the ones who strive for and take pride in having "the best", and being sure to tell you about it at every opportunity.
That includes anti-snobbery too.
I have my priorities, and can be extremely narrow minded about what works for me (or not) and why. However, I'm not so blinkered as to think others all view things from the same perspective. I accept and respect that my motivations for a certain choice, may be of no relevance to someone else - and vice versa. We all walk a different path.
My knives cut stuff. Some were cheaper than others. Some are suited to certain tasks better than others. Some are more comfortable than others. Price, maker, country of origin, steel grade, or age of design, don't always factor in. I've had Vic and Wenger knives that work well for me, and also ones that don't. I think my cheapo Bryd Tern is better than my 1st generation UKPK, and both are better than my semi-custom £200+ folder. Others may disagree, or even sneer at all three of them.
A Swiss knife ticks the boxes for me some days, and on others I'll choose a different cutting tool. However, whatever knife I end up choosing, the only person I hope to impress with that choice, is myself. The snobs might not like it, but I'll have the job done while they're still trying to be noticed and get peer validation for their tool choice.
-
I'm the opposite end of the spectrum on this. I always passed over the SAK's and bought other knives until I picked up a Trekker and started using it (a lot) on my job and I don't care what grade of steel it is, it has taken an absolute beating and cut a lot of tin and copper sheathing on cables, small branches, turned many Phillips and flat screws and has never let me down yet. I passed by that knife in the display case at a local hardware store for years because of a preconceived notion it wouldn't hold up because it wasn't one of the higher dollar knives and I couldn't have been more mistaken. Since then I've been collecting them like crazy. Have a ton of collectibles I wouldn't dare put to use, but quite a bit that I've changed scales on and do carry with me and use on a regular basis. Many days I have a Leatherman on my belt and my Trekker in my pocket. (and maybe another knife in my jacket pocket, because... why not?) Why does brand, price point, or grade of steel have to be the end all? If a tool proves reliable and has proven useful to you, that's all that should matter. If anything, outside of Victorinox, I'm more of a "Made in USA" snob, which may also have led me to pass by that Trekker in the hardware store for years. Now our troops are getting the Soldier model as a utility knife, which I think is awesome. I know first hand it will hold up.
-
@CraftsmanSAK said:
Now our troops are getting the Soldier model as a utility knife, which I think is awesome.Is this true?
I've seen rumors, but I am not aware of any units issuing SAKs to servicemen from any branch.

-
I've seen rumors, but I am not aware of any units issuing SAKs to servicemen from any branch.

With a lot of items like this, they aren't issued to anyone, but they are now in the system with an NSN for them to be able to order for their units (NSN – 1095-01-653-1166). Same with a lot of gear. As of 2018 the Swisstool (or as the military is calling them the Knife Combat Multi-Tool) and is also available for units to order with the NSN of 1095-01-670-1865 and is also black anodized. We learned early on that your supply clerk is your best friend. We also learned if you went over budget and your division chief starts wondering why you're gonna have a bad day.

-
@Ron Who said:
I have about ten or twelve knives in the snob category. Over 200 dollars each.
But I got them because of their craftsmanship and handle materials, and not all of them have premium steels.
As a rule I don´t carry them, I have cheaper folders that may get damaged by use without me starting to cry.
And of course I carry SAKs. In common daily life, a man needs more just than just a blade.
So if you´re carrying a high end folder but no SAK / MT on the side I think you´re missing out.
:D -
@Frailer said:
While there is no doubt some internal "price justification" going on--accompanied with a healthy dose of "Fear Of Missing Out" that drives many purchases in the first place--I think "value" merits additional discussion.One place where the value proposition interests me is the world of watches. I've worn a wrissmurfch since I was a wee lad for one purpose only: to tell me exactly what time it is. Specifically, I want any watch I wear to be accurate enough that I never have to re-set it outside the mandatory (and silly) semi-annual standard/daylight saving time change. Furthermore, I hate watches that require batteries, as I've had watch batteries crap out on me when I was in the middle of nowhere. Finally, I need the watch to be reasonably water-resistant and durable. I was never completely satisfied with a watch until the advent of the Citizen Eco-Drive. Since I live in one time zone and work in another, I own two (a 7170 and an 8180), and I am absolutely, completely happy with them.
While I understand the lure of high-end automatic watches, they don't appeal to me enough to actually buy one. There's something marvelous about a completely mechanical thing that can mark time to a very high level of accuracy, but--for me--the juice isn't worth the squeeze. Many people purchase a Submariner or a Seamaster for the "snob factor," but many others own one (or several) because they truly love the beauty inherent in these mechanical marvels. I'm a fully-flawed human with an ego as fragile as the next guy's, but I don't tend to rub elbows with people who'd be impressed with my watch, so I don't belong in the former group. On the other hand, as someone who loves well-made mechanical things I could easily find myself in the latter. Nevertheless, I'm simply unwilling to pay used car money for the privilege of wearing a mechanical marvel on my wrist, because--for me--a watch is fundamentally about telling time.

I just bought an Citizen Eco Drive for the exact reasons you mentioned. What knife is that in the picture you posted? Is that the Sebenza? What model is it? It is cool looking and as I said I like your style.
-
@Mechanickal said:
:DHere´s one. Protech TR1 auto, 154CM steel, #16/100 of a special run they did for Böker.

-
I just bought an Citizen Eco Drive for the exact reasons you mentioned. What knife is that in the picture you posted? Is that the Sebenza? What model is it? It is cool looking and as I said I like your style.
It’s a small Sebenza 21. This particular example has an Insingo blade, and it’s the KnifeArt version with a carbon fiber front scale. It’s an absolutely wonderful knife.

-
@CraftsmanSAK said:
With a lot of items like this, they aren't issued to anyone, but they are now in the system with an NSN for them to be able to order for their units (NSN – 1095-01-653-1166). Same with a lot of gear. As of 2018 the Swisstool (or as the military is calling them the Knife Combat Multi-Tool) and is also available for units to order with the NSN of 1095-01-670-1865 and is also black anodized. We learned early on that your supply clerk is your best friend. We also learned if you went over budget and your division chief starts wondering why you're gonna have a bad day.
Shame on you,
is right!
I'm not a knife snob but due to my LOVE of the Swisstool one could consider me a MULTI TOOL SNOB and that is one I don't have.
SHAME on you for putting it out there for me to find.


SO BEAUTIFULL

AND with all this Covid mess I'm BROKE. :ahhh :ahhh -
@Douglas said:
Shame on you,
is right!
I'm not a knife snob but due to my LOVE of the Swisstool one could consider me a MULTI TOOL SNOB and that is one I don't have.
SHAME on you for putting it out there for me to find.

:D $$$ like drops of rain down the gutter, as Pennywise hands you the next toy. bwahahaha
-
@Barry Rowland said:
Some folks just get too caught up in the details and forget that this is probably the dumbest hobby there is.Get the tar and feathers! >:D

I clicked on this thread knowing well this thread could have been about me. Somewhat relieved it’s about different kind of snobby regarding my dumbest hobby. ;)
-
:D $$$ like drops of rain down the gutter, as Pennywise hands you the next toy. bwahahaha

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login