PTC vs. MC
-
Of the 58s, the Rambler/Manager has most of the tools I need most of the time. However the second blade and especially the orange peeler are great tools. I can scrap, pull cut and pierce stuff with it.
Therefore the Vagabond is the optimum 58 for me. All the good stuff from the MC, minus the useless coke spoon. I cannot understand why it is no longer in production.
I would love to see a Vagabond with the mini screwdriver and the awl. That would have been excellent. Maybe make it bigger at 65mm. Alox too, and pair it to a Leatherman Style PS for pliers and tweezers.

Στάλθηκε από το HUAWEI VNS-L31 μου χρησιμοποιώντας Tapatalk
-
Vagabond looks great. I've done great with my Manager for years now on my keychain. I came from a MC but never lost my love for the MC. AimlessW kept talking about the PTC so I finally come upon one. I was off and on with it till I made time for it. I'm impressed with it so I carry it.
-
No PTC here so I can´t compare. But that awl looks nice.

PS I love my MiniChamps.
-
I can’t imagine using a 58mm tool! That is soooo small!
I bought a Rambler and just stuck it right back in the box. Way too small for me to even hold onto the thing!
My 74mm Executive is as small as I think I can go! Haha
Sent from my iPhone using Tapatalk
-
@zrxoa1 said:
I can%u2019t imagine using a 58mm tool! That is soooo small!I bought a Rambler and just stuck it right back in the box. Way too small for me to even hold onto the thing!
My 74mm Executive is as small as I think I can go! Haha
Sent from my iPhone using Tapatalk
There's a lot of love here for the 74mm's. I've owned and used a few including an Executive and for me they are an awkward size. They're to big for my change pocket to long for a keyring and they sit in the bottom of my pocket in an awkwardly on the side hard to get to way.
For me personally the 65mm's are the perfect compromise between carry and handling. -
Yes the tool is small but even in my mitt its very usable. The drivers are like jewelers drivers without the long shaft.
-
@gene stoner said:
There's a lot of love here for the 74mm's. I've owned and used a few including an Executive and for me they are an awkward size. They're to big for my change pocket to long for a keyring and they sit in the bottom of my pocket in an awkwardly on the side hard to get to way.
For me personally the 65mm's are the perfect compromise between carry and handling.Get a pocket caddy for it and you'll change your mind.
8) 8) -
Maybe a 74 with better drivers, perhaps a longer 58 combotool would nice. And an awl and a mini driver too!
Στάλθηκε από το HUAWEI VNS-L31 μου χρησιμοποιώντας Tapatalk
-
@pfrsantos said:
Get a pocket caddy for it and you'll change your mind.
8) 8)Probably not. The Executive tool set is in my experience....... "Silly".
-
So my favorite tool on my PTC is the awl and one of the main reasons I have resisted the MC. What I'm discovering is that many of the task I would use the awl for the cut and picker blade can handle. I still prefer the awl on the PTC but I must admit the MC definitely proving its usefulness.

-
That Cut/Picker tool is great. I looked at the Vagabond and its one to get next.
-
It's certainly close if it isn't! All the tools you need with very little you don't, if any.
-
I don´t mind the ´useless´ tools on the MC, they add to the fun factor and I would be cool with a few more. :D
-
That's part of the fun, finding ways to make them useful. I know the spatula makes a great straight edge screwdriver :D
-
So here's another observation about the small SD on both tools. The Wenger may fit more screws but the Vic is by far the the easier SD to use on Phillips screws.
Even though the Wenger fits the small Phillips the Vic is a better choice.
Another thing I've noticed is I run into less and less small slotted screw. Not even my new glasses have have screws so I guess the Jewelers SD is becoming less useful then it was in the past.
-
I´ve worn glasses for over fifty years, never a screw loose. :)
(And I checked, my new glasses still have screws). -
I've had some occasional luck using the jewelers screwdriver on the PTC to work with small torx and hex screws. It is a bit touch and go and requires firm downward pressure but it has worked for me a few times.
Diggin' this thread.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

