What did you use your Sak on today?
-
Great uses Wolfy

-
Used the Traveller's scissors to cut the swing tags off some new clothes.
-
Great use Sawl

-
I just used it


-
Nice one Edi

-
I finally got around to fixing my CRKT M16-10KS. I'd goofed up when I used thread locker on the pivot clip screws-- I used way too much and it had seized the blade up. I used the large screwdriver to undo the pivot screw, then my bit driver on a dedicated precision screwdriver to remove the clip. Cleaning was a little different, as I'd chose not to unscrew the frame. I used the toothpick and awl to scrape assorted grime and thread locker out of the thing. That wasn't enough, so everything got cleaned with hot water, and a toothbrush. Reassembly was done with the aid of the toothpick to align blade, washer, and handle frame. Resassemble, using large screwdriver again.
Works like it was intended to again; after oiling. Seems the "penetrating" ability of my gun oil ate away the last of the threadlocker.
-
Oh, and the hook saved my rear again. I was attaching a fixed blade that had a MOLLE sheath to my 3-Day Assault Pack. I couldn't pull the snap through the last row of webbing to get it to attach to the female snap at the tip of the sheath. Tried several different types of pliers, then realized I had my Huntsman in my pocket. I was able to grab the inside of the snap with the hook, and pull it through without issue. That is why it's far from being the most useless tool on the SAK.
-
....great Cody, hooks are cool

-
Used my pioneer awl to scrape away fossilized gunk from around the top of a dexk stain tin, then the flat blade driver/prybar to get it open
-
Great uses cody and Storm

-
Used the point of the awl to reset a dodgy timer in an iffice building to restore lights to a couple of corridors. Used the blade to cut up some meat for a stir fry for tea
-
I used three different knives to amuse myself, opening a can of tomatoes.
I normally use the Vic can opener. This time, I used the Vic combo tool (Waiter), the Wenger can opener (Traveller), and the Wenger combo tool (Basic 66) for consecutive thirds.
Taking my time, they all worked pretty well.
The Vic combo tool and the Wenger can opener made the tidiest cuts, the Wenger combo tool leaving a more jagged edge than the others.Enjoy your evenings/afternoons/mornings! :P
-
Great uses Storm and Sawl

-
*
I used the flat driver on an Explorer Plus (my preferred EDC) to remove the plug from an inflatable ball chair. Manly!* -
Good use Powernoodle

-
@powernoodle said:
*
I used the flat driver on an Explorer Plus (my preferred EDC) to remove the plug from an inflatable ball chair. Manly!*As long as you do it with a SAK, everything is manly!

Ok, most of it :D
-
Spartan

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

