SAK STACK 30 days challenge 2020 for Swisschamp, Cybertool & Toolchest
-
Day 1
Soldiers serving with the Imperial Army are doing a last minute check on my SwissChamp, making sure it is ready to go:

They did not like the scales with the ad print, so I was tasked to order new ones. Lately it has been tricky to get supplies from Imperial Supply Fleet, so I hope the delivery will make it in time for the challenge. In the meantime, everyone is under orders to ignore the ad print
First use: Opening a new bottle of hydrogen peroxide using the small blade.

-
@SirVicaLot said:
Day 1Soldiers serving with the Imperial Army are doing a last minute check on my SwissChamp, making sure it is ready to go:

They did not like the scales with the ad print, so I was tasked to order new ones. Lately it has been tricky to get supplies from Imperial Supply Fleet, so I hope the delivery will make it in time for the challenge. In the meantime, everyone is under orders to ignore the ad print
First use: Opening a new bottle of hydrogen peroxide using the small blade.

I don't mind the Hitachi ad. We've treated a (factory refurbished, I might add) 12V impact driver and drill hard, and it's still going strong. I kind of prefer the 18V Dewalts, but the Hitachi has done stuff really it was too small for and didn't hurt it at all. I also own a corded 1/2 corded hammer drill for heavy drilling that replaced an already half-worn out when I got it 30 year old Craftsman 3/8 unit my Granddad had given me. And it will leave the cordless tools in the dust.
But, I will draw the line at knives for Hooters (which exist) and the like. And I'm not the biggest fan of pharmaceutical knives, but I have an exception for those with exclusive toolsets that Vic made in the 1980s.
-
**Day 1 **
I'll be doing the challenge with the 7 layer Champion.
For my first day on the Stack Challenge, I wanted to try the corkscrew on the jar trick. It worked like a charm!

-
@Rizio Il Ghiro said:
Day 1A frustrating day at the computer keyboard, but I noticed that the arms on my reading glasses were getting loose, so first go with CT34’s bit driver was a failure, so SC whipped out the mini-screwdriver before CT34 had a chance to change tool! Awl tight now!
Hope tomorrow is a better day, I think that's one of the reason why I always prefer corkscrew instead of phillips, mostly because of the mini driver. :D
Used my trusted Swisschamp for an after-homeoffice beer. The cap had no chance but surrender.
Good use!

@kamakiri said:
I’m not participating, but wanted to cheer on all of the April Challengers!Will be checking in and some former Stack challengers will be watching. ‘86 Hoff Deluxe Super Knife, ‘99 CT34 and ‘08 CT Lite:
You sure? It's still not too late to join...

@SirVicaLot said:
I will carry mine in a flexible belt ˋsheath´. We still need to see that sock and headband carry method of yours
:DYou bet! :D
-
@SirVicaLot said:
Day 1Soldiers serving with the Imperial Army are doing a last minute check on my SwissChamp, making sure it is ready to go:

They did not like the scales with the ad print, so I was tasked to order new ones. Lately it has been tricky to get supplies from Imperial Supply Fleet, so I hope the delivery will make it in time for the challenge. In the meantime, everyone is under orders to ignore the ad print
First use: Opening a new bottle of hydrogen peroxide using the small blade.

At least the ride is made by Hitachi, it should last!

@cody6268 said:
I don't mind the Hitachi ad. We've treated a (factory refurbished, I might add) 12V impact driver and drill hard, and it's still going strong. I kind of prefer the 18V Dewalts, but the Hitachi has done stuff really it was too small for and didn't hurt it at all. I also own a corded 1/2 corded hammer drill for heavy drilling that replaced an already half-worn out when I got it 30 year old Craftsman 3/8 unit my Granddad had given me. And it will leave the cordless tools in the dust.But, I will draw the line at knives for Hooters (which exist) and the like. And I'm not the biggest fan of pharmaceutical knives, but I have an exception for those with exclusive toolsets that Vic made in the 1980s.
I can't believe I just googled it, and it did exist! :o
@ElevenBlade said:
**Day 1 **I'll be doing the challenge with the 7 layer Champion.
For my first day on the Stack Challenge, I wanted to try the corkscrew on the jar trick. It worked like a charm!
I learned something new today.
I remembered I used to pry it loose a little with a can opener, and I bet corkscrew is a way better solution. -
@comis said:
I learned something new today.
I remembered I used to pry it loose a little with a can opener, and I bet corkscrew is a way better solution.It sure is - it goes just deep enough to break the seal without bending the lid, and the corkscrew (like the screw of Archimedes) requires little effort to do a lot of work.
-
@ulzhan said:
@comis Cool magnet you've designed!You have a interesting selection of tools. How does the wenger toolchest work?
Thank you! About the S54, I have collected it long while ago, but honestly haven't used it a whole lot. So I think I could probably tell you better as I get more use in the challenge. :D
@ElevenBlade said:
It sure is - it goes just deep enough to break the seal without bending the lid, and the corkscrew (like the screw of Archimedes) requires little effort to do a lot of work.
-
Day 1
Today I present a vanity picture of my mate for this month. I did cut open a parcel today but, alas, forgot to take a picture. I tested the P7 clip on several occasions lately with the CT34 and found that I don't like it as much as I thought I would: it ruins my jeans and makes the SAK somewhat awkward to handle. I will therefore stick to the lanyard when putting the XLT in my pocket, which admittedly might not often be the case as I rarely leave the house these days <big sigh>. Still, I am confident the XLT and I will have some moments in this month of April. Take care guys and a good start of the challenge to everyone, Simon

-
@ElevenBlade said:
It sure is - it goes just deep enough to break the seal without bending the lid, and the corkscrew (like the screw of Archimedes) requires little effort to do a lot of work.Yepp, it works perfectly for that

-
DAY 1
Well, this is a big change from yesterday's carry, a small, compact, and lightweight Spyderco Ladybug that is slim, weighs less than an ounce, and is less than three inches closed. I can't tell that I have it on me. The SwissChamp, on the other hand....

I used two tools today, the pen blade for opening a store brand version of Prilosec, and the scissors for this.

And an SAK/LEGO shot. I used to have several realistic emergency vehicles I built, but they got dismantled. Thus, SIKU models are gonna have to be the stand-in with the minifigs and equipment.

-
Day 1
I was pleasantly surprised to discover the SwissChamp fit into may edc pocket organizer.

The SC helped cut up a pear for breakfast and open a package. I also used the magnifier to check out an expiration date.
Interesting how the gray looks blue in the picture. -
Well, this is a big change from yesterday's carry, a small, compact, and lightweight Spyderco Ladybug that is slim, weighs less than an ounce, and is less than three inches closed. I can't tell that I have it on me. The SwissChamp, on the other hand....

I used two tools today, the pen blade for opening a store brand version of Prilosec, and the scissors for this.

And an SAK/LEGO shot. I used to have several realistic emergency vehicles I built, but they got dismantled. Thus, SIKU models are gonna have to be the stand-in with the minifigs and equipment.

That ladybug is cool, I have a small knife like this when I was in college and that was a long, long time ago. The opening of the ladybug needs some getting used to, since it has a tighter liner lock and the frame is small, but it should be easy to flick open if attached to a keychain at the end. Lego and SAK, who can say no to that?

@Sos24 said:
Day 1
I was pleasantly surprised to discover the SwissChamp fit into may edc pocket organizer.

The SC helped cut up a pear for breakfast and open a package. I also used the magnifier to check out an expiration date.
Interesting how the gray looks blue in the picture.The second photo looks like a filter has applied to it, pretty cool in its own right.
That pocket organizer really does serve you well, which reminded me to get a chance to talk to the Etsy owner whether a variation of that is possible.
-
Day 1:
I had actually forgotten about this challenge.
So here is the Wenger that will replace my Executive for the month!


Sent from my iPhone using Tapatalk
-
@ulzhan said:
@comis Cool magnet you've designed!You have a interesting selection of tools. How does the wenger toolchest work?
@Rizio If you combine your SAKs you almost get a XLT :D
Not thought of that, Ulzhan, and it’s a more pocket friendly version to boot!
Day 2
Inspired by the alternative corkscrew use, I thought I’d give it a go on some jam for breakfast- and it worked like a charm! I must try and remember that tip for the next time I come across a jar lid which really puts up a fight! As with others, the corkscrew is my preference over the Philips as it houses that fabulous mini-screwdriver- as I life long specs wearer, it’s a must-have for me, my first was on a golfer (now called compact- still have it, though I have modded all its successors in my collection!) I bought in 1991 before heading off overseas.

-
@Rizio Il Ghiro said:
Not thought of that, Ulzhan, and it’s a more pocket friendly version to boot!Day 2
Inspired by the alternative corkscrew use, I thought I’d give it a go on some jam for breakfast- and it worked like a charm! I must try and remember that tip for the next time I come across a jar lid which really puts up a fight! As with others, the corkscrew is my preference over the Philips as it houses that fabulous mini-screwdriver- as I life long specs wearer, it’s a must-have for me, my first was on a golfer (now called compact- still have it, though I have modded all its successors in my collection!) I bought in 1991 before heading off overseas.
What are we making here?

Talking about corkscrew, I saw the discussion about a new campaign on firestarter, this time the ferro rod hosted by the corkscrew, and I can't help but to wonder what other things could be hosted at that space.
-
Day 2
Some of the household supplies had been piling up for close to a week now, and it's time pull them out of quarantine and unbox. Staghorn SC has been in the collection for a long time, and finally get a chance to put itself to use.

-
DAY 1
My competitors




Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

