Wenger mod - please help
-
@Sawl Goodman said:
Surprising no one's mentioned the Wenger Traveller. Three layers with scissors; 17mm wide.A new option might be a Delemont Evowood 14. Same as the Traveller but with the Vic can opener and awl. The Vic can opener turns Phillips screws. The scales are contoured similarly to the regular cellidor Evolution ones but I reckon you could grind/sand them down to be somewhat thinner, so that the overall knife thickness is about the same as the Traveller's.
However, your Waiter/Signature combo covers almost all the functionality of the above suggestions, and includes a pen. The combined weight (~35g + ~23g = ~58g) will be less than a Traveller (74g) or Evowood 14 (heavier than the Traveller). Since the alox Bantam/Signature will be even lighter, I'd stick with the combo. :)
The Wenger Traveller is the perfect SAK for my requirements. I'll pick one up in a heart beat. But I think it is no longer available, at least not new
In fact, the mod that I am planning = Traveller.As to the Evowood 14, I think it has the same configuration as the Evo 14. The latter with cellidor scales and one third cheaper than the wood version. I am wondering if the cellidor scales can be slimmed down with sandpaper filing which is a much more economical option. Has anyone done such a thing, and how does it look ?
-
Have you thought about placing a wanted ad for a traveller in the 'tools needed' section?

-
@roamingcat said:
The Wenger Traveller is the perfect SAK for my requirements. I'll pick one up in a heart beat. But I think it is no longer available, at least not new
In fact, the mod that I am planning = Traveller.As to the Evowood 14, I think it has the same configuration as the Evo 14. The latter with cellidor scales and one third cheaper than the wood version. I am wondering if the cellidor scales can be slimmed down with sandpaper filing which is a much more economical option. Has anyone done such a thing, and how does it look ?
I have a spare that I could do a straight swap with you for. However, there's a small piece chipped off one of the scales, there's no toothpick and tweezer slots, and the main blade is partially serrated. Pics below.
The problem with sanding stuff thinner, is that you don't know how much material you're leaving to the voids underneath.



-
That Wenger is 84mm though, right? So custom scales to replace the chipped one would not be an issue.
-
No, Wengers and Delemont Vics are 85mm, Ibach Vics are 84mm

-
Ahh, darn it. I always mess these up :ahhh

-
After much deliberation, I decided to head down to my nearest Victorinox outlet and check out the Evo 14 in person. It turned out the thickness is not bad as I thought from reading the specs from their website. Due to the contoured scales, there is actually only a small cross section near the middle which is indeed 20.5mm. The rest of the scales is mostly around 18mm. While this is still thick in my books for a 3-layer, it is an 'improvement' from my initial thoughts.
In view of this, I took the good advice from the folks here and picked my new 3-layer. I will defer my Wenger mod ambition, at least for now.

My new Evo 14 sitting beside my old Wenger Tradesman. I really wish Victorinox make their Evo 14 scales slimmer in their next update, much like what the old Wenger Travaler used to be. That will make my perfect EDC.
sigh - they don't make them like they used to.


-
I think you will like the Evo14, it has a great tool set in my mind

-
@AimlessWanderer said:
I have a spare that I could do a straight swap with you for. However, there's a small piece chipped off one of the scales, there's no toothpick and tweezer slots, and the main blade is partially serrated. Pics below.The problem with sanding stuff thinner, is that you don't know how much material you're leaving to the voids underneath.

Very nice. Never saw one of these beauties before.
Partialy serrated is very nice.Enviado de meu moto g(6) usando o Tapatalk
-
@SirVicaLot said:
I think you will like the Evo14, it has a great tool set in my mind
Thank you. Yes, the Evo14 tool set is almost the same as the old Wenger Traveler, which I like very much. Lightweight and functional enough for edc and travel. I only wish they make the scales slimmer but I guess thats a tradeoff for the more ergonomics grip.

-
@SirVicaLot said:
I think you will like the Evo14, it has a great tool set in my mind
Agreed. It's the nearest thing to the long discontinued and uncommon Vic Alumnus.
-
@Sawl Goodman said:
Agreed. It's the nearest thing to the long discontinued and uncommon Vic Alumnus.Interesting. So I see the Evo14, Vic Alumnus and Wenger Traveler all share a very similar toolset? The main difference is the can opener between the Vic and Wenger, and the Vic is negligibly 1mm shorter. The new Evo14 is by far the thickest though, due to its scales.
-
To answer the original question with all the extra information. If the tool is thick enough, such as the pliers, you can file down the bushings and remove it and put the liners and tool back in. Just be careful not to damage the outside liner. I do think it’s easier to just pick up the model I. Question but sometimes chopping things up is fun.
-
@Simyo said:
To answer the original question with all the extra information. If the tool is thick enough, such as the pliers, you can file down the bushings and remove it and put the liners and tool back in. Just be careful not to damage the outside liner. I do think it’s easier to just pick up the model I. Question but sometimes chopping things up is fun.Thank you for the additional advice. I think I'll probably end up going down the mod route one day, as I am still not 100% content with the thickness of the Evo14 scales. I just need to accumulate more confidence from fellow Wenger modders b4 I tear mine apart.
-
@roamingcat said:
Interesting. So I see the Evo14, Vic Alumnus and Wenger Traveler all share a very similar toolset? The main difference is the can opener between the Vic and Wenger, and the Vic is negligibly 1mm shorter. The new Evo14 is by far the thickest though, due to its scales.Right on.
You'll notice that Vic also changed the Wenger punch to its own reamer/awl. I like that they kept the Wenger blade (a better shape IMO) and the flat screwdriver that locks when you push it onto screws.
The curved outer liners make the Delemont Evo 14 a little higher than the Traveller. And while the Evo 14 is more of a pocketful, the sculpted scales do improve handling comfort IMO. In particular, the corkscrew bothers me less when I hold my Evowood.
Anyway, congratulations on your new purchase! Thick as they are, I feel that both the red and wooden scales make the Delemont 14s classier and more comfortable alternatives to the Climber.
-
@Sawl Goodman said:
Right on.You'll notice that Vic also changed the Wenger punch to its own reamer/awl. I like that they kept the Wenger blade (a better shape IMO) and the flat screwdriver that locks when you push it onto screws.
The curved outer liners make the Delemont Evo 14 a little higher than the Traveller. And while the Evo 14 is more of a pocketful, the sculpted scales do improve handling comfort IMO. In particular, the corkscrew bothers me less when I hold my Evowood.
Anyway, congratulations on your new purchase! Thick as they are, I feel that both the red and wooden scales make the Delemont 14s classier and more comfortable alternatives to the Climber.
Thank you for your kind words. Yes I looked at the Evowood version too. It is a classy looking piece, and has a classy price to boot 8). I think it would make a good collector's item. I went for the cellidor version in the end as otherwise I would be too hesitant to use it. But thats just me.

-
@roamingcat said:
Thank you for your kind words. Yes I looked at the Evowood version too. It is a classy looking piece, and has a classy price to boot 8). I think it would make a good collector's item. I went for the cellidor version in the end as otherwise I would be too hesitant to use it. But thats just me.
I understand your sentiments completely. Yeah, the Evowoods are evospensive. I was lucky to get mine used for a very good price. A tiny ding on one of the scales, is all. I prefer it as an elegant yet useful desk ornament than as pocket carry!
-
My Evowood 14 gets carried, and more often than my other Travelers too. I decided that if I was going to pay that price, I should get my money's worth from it in usage.
That and the Soft Touch 14 are the only two Evolution scaled knives I have. My other two Travelers, aside from the part serrated one shown above, are a stainless version, and a SwissBuck Sidekick. The SwissBuck and Soft Touch both have a clipped blade.
I added an inline Phillips and carabiner layer to my only celidor version, so that's even thicker still.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login