Victorinox Tang Stamps
-
I've never seen an actual picture of HSSR,What period does it represent?

-
Thank you all for the interest on that tang stamp sheet and for your help.
I think that is a project never been finished, because like every week, I learn something new, see a new stamp or something that helps me make the dates more accurate.
So what is a new or different tang stamps. I hope you understand, that I can
t consider every tiny little change/difference, that happened, when the pressure of the punching machine was a little too high or too low, or that happened when they used a different kind of steel. So for me a difference is a new/different name, a small letter instead of a big one, a clear difference in the design. For the elinox stamp, there are at least 6-7 "different" stamps they used. The main visible difference is the size of the stamp, and of course, they needed different tools for those stamps. But for this charts, I dont want to make here any difference, because its already really complicated. Its not only about the stamps, its also about the combination with other stamps.So my actual tang stamp sheet has the following corrections you mentioned: the VSSR1 stamp I put between 1955 and 1986. The date “1952” comes officialy from victorinox. I have officer knives with visible rivets with the VSSR1 stamp. They used the VSSR1 stamp for most of the lines of the knives. I don
t know if there was any line they used it from 1952 on, but I dont think for officer knives. But this chart is not only about officer knives.The “AS3” stamp comes always with the “VSS5” or the “VSS3” stamp and the “VOC1” So I still would put it between 1951 – 1986. I know, this date is not really accurate, because it’s a really rare tang stamp, not used many times, so I just have not enough examples to narrow the dates.
For the “VSS4” stamp I have examples of officer knives with non visible rivets I think at least from the 1970s. So why do you think it was only used till 1957?
The “ESSR” stamp I put between 1973 and 1976. I have a dated 1976 knife with that stamp. And the “EC” between 1957 and 1974.
The “VOC1” and “VOC2” stamp I did not change yet, but I will. So the correct date would be 1955 – 1957? Because it is always together with the “VSSR1” stamp. Does the “VOSC” not comes after, but started parallel?
-
@ulli said:
Thank you all for the interest on that tang stamp sheet and for your help.I think that is a project never been finished, because like every week, I learn something new, see a new stamp or something that helps me make the dates more accurate.
So what is a new or different tang stamps. I hope you understand, that I can
t consider every tiny little change/difference, that happened, when the pressure of the punching machine was a little too high or too low, or that happened when they used a different kind of steel. So for me a difference is a new/different name, a small letter instead of a big one, a clear difference in the design. For the elinox stamp, there are at least 6-7 "different" stamps they used. The main visible difference is the size of the stamp, and of course, they needed different tools for those stamps. But for this charts, I dont want to make here any difference, because its already really complicated. Its not only about the stamps, its also about the combination with other stamps.So my actual tang stamp sheet has the following corrections you mentioned: the VSSR1 stamp I put between 1955 and 1986. The date “1952” comes officialy from victorinox. I have officer knives with visible rivets with the VSSR1 stamp. They used the VSSR1 stamp for most of the lines of the knives. I don
t know if there was any line they used it from 1952 on, but I dont think for officer knives. But this chart is not only about officer knives.The “AS3” stamp comes always with the “VSS5” or the “VSS3” stamp and the “VOC1” So I still would put it between 1951 – 1986. I know, this date is not really accurate, because it’s a really rare tang stamp, not used many times, so I just have not enough examples to narrow the dates.
For the “VSS4” stamp I have examples of officer knives with non visible rivets I think at least from the 1970s. So why do you think it was only used till 1957?
The “ESSR” stamp I put between 1973 and 1976. I have a dated 1976 knife with that stamp. And the “EC” between 1957 and 1974.
The “VOC1” and “VOC2” stamp I did not change yet, but I will. So the correct date would be 1955 – 1957? Because it is always together with the “VSSR1” stamp. Does the “VOSC” not comes after, but started parallel?
Yes you are absolutely right about "different" stamps due to technological process. But we need stamps that looks close but actually used in different times (usually they changed in transition periods together with other tools or knife construction). I mean large +Pat (1951?-1957) and small +Pat (1957-1971):

and large Elinox (1957-c.1965) with small Elinox (c.1965-1974)

What about Armee Suisse AS3 stamp - I'm sorry, I mean AS2 of course (couldn't find it in 2017 MTO version ;) ). BTW can you show AS3 stamped knives please, it's interesting.
After WW2 stamps usually changed in so called transition periods 1951-1952, 1957-1958, 1973-1974 and 1985-1986 (so VSSR1 started in 1957 etc.) We had nice discussion about 1950s stamps recently here and I like Jazzbass resume:"The progression of stamps in the early vintage (EVNT) era from 1951-1957 seems to go:
- Armee Suisse/Victoria Switzerland Stainless
- Victoria Switzerland Stainless
- [Large] Victorinox Switzerland Stainless/Victoria Officier
- [Small] Victorinox Switzerland Stainless/Victoria Officier
- Victorinox Switzerland Stainless Rostfrei/Victoria Officier Suisse
Stamps #3 and #4 make of the bulk of the knives from this era. #5 is really the stamp they started using with the mid-vintage hidden rivet knives in 1957/58, with a bit of over lap in both directions."
Knives for illustration (transition 1957 knives : visible rivets knife with new VSSR/VOS like you mentioned and hidden rivets knife with old VSS/VO )


We can't to date exactly 3# to #4 changes but other stamps can be dated well:
Armee Suisse AS2 1936-1951
Victoria Switzerland Stainless vss2? till c.1952
Victoria Officier crossbow (both) voc2 1952-1957
Victorinox Switzerland Stainless vss4 1952-1957
Victoria Officier Suisse crossbow VOSC 1957-1973(4?)
Victorinox Switzerland Stainless Rostfrey vssr1 1957-1986
Here's link to discussion:
/topic/51152
Great you have ESSR knife with date! Can you show it please for mr. Kamakiri.
-
Ok I
ll try to upload some pictures of dated knives the next few day. But I dont think Im the only one having such knives? Maybe Ill ask elsinox so we can put dated knives together. Hopefully you will be surprised on same knives/dates.I spoke many times with victorinox about those tang stamps and the exact time range. Everytime I showed them a special tang stamp or special time range, they answered with "ahh, thats most likely a "monday stamp""... So what do they mean with that. After weekends, holidays or carneval, it happened sometimes that an employee took the "wrong" tool/stamp or chose the wrong pressure, put the tools the wrong side in. They realised that sometimes fast, sometimes not, so maybe already 5000 blades were made with the "wrong" stamp, for example an elinox stamp instead of an vssr. So what happened next. The employee hat to go directly to the director, karl elsener senior, to tell him about the "problem". And according to victorinox, his answer was always: as long as the knife is functioning fine, just sell them. Who cares about the stamps/non functional parts.
And of course, hes right. Why not sell those knives? A few years ago, I saw at the ibach shop long nailfiled golfers for sale, modern tang stamp, old parts. I asked why they sell them. The answer was just: an employee found a box with nailfiles and decided to use them and he assembled golfers. When I was for a guided tour at victorinox, I saw that an employee grinded and fixed kitchen knives by hand, every part. I asked why. And the answer was: ah hes just producing the demanded year production of 50 pieces, because for such a small amount, it would be much too complicated to change the machines. And as long as someone still needs those special knives, we will produce them.
So that was and still is victorinox. So not for every thing/knife you see, there`s always an easy answer. Thats the same for tang stamps and time ranges. So not every mixed knife (old parts with new parts; old stamps with new parts;..) means that it has been repaired, or is a mod or a custom made knife. So 1 dated knife still means nothing, a few same knives means more, but for verifiation, you need lets say 20 pieces. -
Haha, nice story about "Monday stamp", thank you! I'd like to have some of them. Yes, I remember that Golfers LNF, I bought Climber LNF that they also made from the rest of LNFs in 2010.
Sent from my iPad using Tapatalk
-
ulli- thanks for the background story and history lesson! And for getting more pictures into the dated inlay thread.
I do have one more request - if you have any examples of ‘Monday’ stamps, could you post them in my ‘OOPS!’ thread here:
/post/2042613
I have a few of my examples there. Like this:

It’s funny that it’s Monday issues, it’s a common saying in the US for mistakes or QC issues in automobiles that they were ‘built on a Friday’, because workers are eager to leave for the weekend. Build dates were often easy to find on a sheet that was inside the car.
-
I added a picture of 2 knives with the stamp "as3"
@kamakiri said:
Like we’ve been discussing, there should be some splits for the stamps that have two or more versions, like +PAT, EC, VSSR1, HSSSome of the graphics don’t appear correct. Like VOC2. Just looks like VOSC with the bottom cut off.
No they appear correctly. It is a different stamp, the crossbow from "vosc", but without the "suisse". Maybe a transition stamp :-)
-
Oh, nice knives! Thank you for sharing, Ulli. This cross in emblem has "triangular" tips like in 1940s- early 1950s. What are other side stamps??
-
The other side stampes are for the 84 mm the "voc1" and for the 91 mm the "vss5"
-
@ulli said:
The other side stampes are for the 84 mm the "voc1" and for the 91 mm the "vss5"Thank you. Can you show pictures please, just interesting to compare this vss5 and another one (vss2?) with blank other side I have on 91mm from early 1950s.
And can you tell us what stamp is on 91mm can opener, upp or pat1?Sent from my iPad using Tapatalk
-
Here 2 more pictures.
-
@jnoxyd said:
Thank you very much, nice knives! 84mm has pre 1951 tools but already Phillips on the back and 91mm looks like post 1952 knife but with older scales. Both looks early 1950s for me.
BTW did they used US PAT PEN stamp together +Pat since 1951?You mean the same time period? I think the US PAT PEND was only used a short time for the US market only. The + PAT was used for all other markets.
-
Ok, thank you.
-
Wow, great! Will this AS3 stamps have a hidden rivet version after 1957?
-
@ulli said:
You mean the same time period? I think the US PAT PEND was only used a short time for the US market only. The + PAT was used for all other markets.I find it hard to believe that they used +PAT at any time before the patent was actually granted (this was on February 28, 1953), because I think that this would have been illegal (pretty much anywhere). I attach the relevant patent document.
-
@MiniChamp said:
I find it hard to believe that they used +PAT at any time before the patent was actually granted (this was on February 28, 1953), because I think that this would have been illegal (pretty much anywhere). I attach the relevant patent document.This is very interesting! As we usually knew before, the +PAT started in 1951,ten year patent period ending in 1971?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login