SAK STACK 30 days challenge 2020 for Swisschamp, Cybertool & Toolchest
-
@Rizio Il Ghiro said:
Max, don’t the newer pliers also have a crimper between the handles unlike the older ones?Day 4
Courier has just dropped off a parcel covered in much plastic (which really stinks of cigarettes!) and sticky tape - SC’s awl cut through the tape in no time (now safely humming in a bin outside!) revealing a new scope for the rat-basher. Bit busy today, but I’ll fit it tomorrow and zero it in.
I saw some of those sniping actions on yt, and it will be mind boggling if an air-rifle could have similar accuracy that far out. We are not talking about bb pellets, right?
@Max Stone said:
Found this for some fun and relevant to this challenge.
Official Victorinox video. Some interesting applications for SC tools...and one tool shown that’s not on the std SwissChamp!
Pretty cool video, though I wish they put the music on. I almost never did go fishing, and didn't know the fork at the scaler was actually meant to dis-hook the fish. Pretty cool!
-
Day 4
The Rebels wait until the troppers have a safety briefing and are about to fall asleep. Then they rush in and take the SwissChamp!!

-
@comis said:
I saw some of those sniping actions on yt, and it will be mind boggling if an air-rifle could have similar accuracy that far out. We are not talking about bb pellets, right?Pretty cool video, though I wish they put the music on. I almost never did go fishing, and didn't know the fork at the scaler was actually meant to dis-hook the fish. Pretty cool!
Comis - it’s a 2.2 / 5.5mm air- rifle, and at sub 12ft/lb I don’t shoot further than 30m - can’t guarantee a clean kill beyond that, and I don’t want rats in my garden, but I don’t want them to suffer either. Thankfulness they don’t come often, but the wildlife food I put out does attract them from time to time - the squirrels and birds provide endless entertainment!

-
Day 04
No uses today. The XLT got a visit from a smaller sibling.

-
Day 4 of 30
Needed to open my New 3ds XL back cover cause i changed larger MicroSD inside. Old was 4GB and new is 32GB

Only Tools Matters
-
@SirVicaLot said:
Day 4The Rebels wait until the troppers have a safety briefing and are about to fall asleep. Then they rush in and take the SwissChamp!!

I think we been there before
:D
/post/1929487@Rizio Il Ghiro said:
Comis - it’s a 2.2 / 5.5mm air- rifle, and at sub 12ft/lb I don’t shoot further than 30m - can’t guarantee a clean kill beyond that, and I don’t want rats in my garden, but I don’t want them to suffer either. Thankfulness they don’t come often, but the wildlife food I put out does attract them from time to time - the squirrels and birds provide endless entertainment!Just look it up, those could really do some damage, but I agree a fast kill probably is more humane than a prolonged death.
No uses today. The XLT got a visit from a smaller sibling.
Cool, was the anniversary scales original on those cybertool?

@Antti Lammi said:
Day 4 of 30Needed to open my New 3ds XL back cover cause i changed larger MicroSD inside. Old was 4GB and new is 32GB

Only Tools Matters
That's gonna keep someone quite happy for a long while... :D
-
@comis said:
I think we been there before
:D
/post/1929487Just look it up, those could really do some damage, but I agree a fast kill probably is more humane than a prolonged death.
Cool, was the anniversary scales original on those cybertool?

That's gonna keep someone quite happy for a long while... :D
My daughters gonna be be happy for that change, now they dont need to remove old game before downloading next one
Only Tools Matters
-
The XLT is definitely EDC - able. :)
Ulzhan, I agree, but just barely and only if you don't mind bulging pockets. That said, although I have a penchant for oversized SAKs, I wonder if the XLT is not just too much in everyday life and rather a SAK for hiking or vacation. Given that it has almost everything, it will be EDC-overkill both for city dwellers and country folks. I believe on any given day in a city you will be adequately served with a CT 34 or CT Lite, whereas on the countryside a Swisschamp or a CT41 will be more than sufficient. So I guess a XLT only really adds value if you are away from home for a longer period of time. What do you think?
-
Day 4
Assisted my daughter with an experiment involving crystals today. XLT helped to build the little plastic treasure chest which came with the laboratory kit.
In other news, I had the XLT in my jeans pocket today during a 2 hour bicycle ride with the family Didn't feel too uncomfortable size- and weight-wise. Carrying the XLT in your pocket makes you feel quite special: a part of you feels invincible while another part of you feels a bit like a dork. A chick magnet this ain't...


-
@comis said:
Personally, I think it is a viable option given there is a good option for carry, some of us just came back from March Madness using the Swisstool and that was even heavier than the XLT. :ahhhA matter of habit and your personal circumstances, I guess. If you don't have to dress up for an office job, I guess you could get used to EDC'ing every SAK except the XAVT maybe. Whether you want to is another question entirely...
-
Day 04
Today I used the primary blade of the CT-41 to peel the first mango of the season. My tree produces small mangoes although they are usually baseball sized as opposed to this golf ball sized baby, but it appeared to be ripe so I wanted to try it. It was good.
-
Today I pulled out my US flag SC to think about many of my best friends and relatives are now facing great adversity in the States, and this month ahead will continue to be an uphill battle for many, and my hearts and thoughts are with each one of them, and to all our fellow members here in the MTO family. For the past month, even though everyone was practicing social distancing, in some way, it brought us closer together than ever before.

Nice SC and wonderful sentiment. MTO is a great family and a nice break from the harsh reality everyone is enduring right now.
-
DAY 4
Tools used were pliers twice (fixing key clip on phone pouch, fixing yard decoration) and fish scaler (extricating knife sheath strapped to backpack so that it could be belt carried by freeing MOLLE strip that was stuck in the pack's webbing).
However, with the yard work, I needed the compound leverage of my Powerlock cutters to salvage chicken wire off some snow fence that, at one point had been used to form a chicken lot, and was getting tossed.
-
Day 4
Phillips for a cabinet door

Corkscrew: /
Phillips: \
-
DAY 4
Well... supplies aren't coming in like years past because of the current situation... so I'll be reusing a spark plug. One good use of the chisel is to scrape carbon off the electrode on a plug if you have no spares on hand. Best way to do it is just place the back side on the chisel blade on the electrode and drag toward you (so you don't cut into the copper if you try to do it moving forward). I've done this on friend's dirt bikes a few times in the past when they had their carb set way too rich. This is a great tool for this task. Works on the ground side electrode as well. Got new oil in all the lawn toys and ready to go. Plug didn't really need changed, but I usually pop a new one in each year just to see the condition of my fuel mixture or if there is oil getting past the rings. -
Nice uses today, folks!

-
Day 4
Needed to patch a rip in a pair of shorts. The SC scissors cut the patch to size.

-
@CraftsmanSAK said:
DAY 4
Well... supplies aren't coming in like years past because of the current situation... so I'll be reusing a spark plug. One good use of the chisel is to scrape carbon off the electrode on a plug if you have no spares on hand. Best way to do it is just place the back side on the chisel blade on the electrode and drag toward you (so you don't cut into the copper if you try to do it moving forward). I've done this on friend's dirt bikes a few times in the past when they had their carb set way too rich. This is a great tool for this task. Works on the ground side electrode as well. Got new oil in all the lawn toys and ready to go. Plug didn't really need changed, but I usually pop a new one in each year just to see the condition of my fuel mixture or if there is oil getting past the rings.Very interesting use. I’ll have to file that away for potential future use.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

