SAK STACK 30 days challenge 2020 for Swisschamp, Cybertool & Toolchest
-
DAY 6
Got a Rainier a while back and decided to clean it today when I got home from work. This is one use for the fish scaler I've done on many occasions with a little piece of cotton and it's perfect because of the width of it. I use the hook remover to push the cotton through the slot and the hook remover is great at pulling the dirty piece of cotton back out. If it's real bad, I end up soaking the knife in warm water first. -
Day 6
My favorite application...

-
Day 6
Awl to open cardboard boxes

Corkscrew: /
Phillips: \
-
Love those Sasquatch scales! I have the 58mm version.
-
@Barry Rowland said:
Love those Sasquatch scales! I have the 58mm version.They are one of my favorites. I thought the Champion, being one of the larger SAKs, would be a good fit. I had put them on a Mountaineer, but I had a pair of Rocky Mountain scales that I thought was a good fit for it.
-
@CraftsmanSAK said:
DAY 6
Got a Rainier a while back and decided to clean it today when I got home from work. This is one use for the fish scaler I've done on many occasions with a little piece of cotton and it's perfect because of the width of it. I use the hook remover to push the cotton through the slot and the hook remover is great at pulling the dirty piece of cotton back out. If it's real bad, I end up soaking the knife in warm water first.Great use. Through this thread I’m finding out some good uses for the fish scaler.
-
Day 6 Update
Re-working that old pool table into shelves for the basement/storage area. Parts of the table had been assembled with heavy duty staples. Some were so wedged into the wood, I could not remove them. So the metal saw took off the protruding ends.

Philips removed some screws to make room for the shelves.

-
Swiss Army Knights mission - Carve a notch into your staff for each time you use the Phillips or the Corksrew. At the end we'll see which got more collective use.
Corkscrew: //
Phillips: // -
@SirVicaLot said:
Swiss Army Knights mission - Carve a notch into your staff for each time you use the Phillips or the Corksrew. At the end we'll see which got more collective use.Corkscrew: //
Phillips: //
-
@SirVicaLot said:
Day 6 UpdateRe-working that old pool table into shelves for the basement/storage area. Parts of the table had been assembled with heavy duty staples. Some were so wedged into the wood, I could not remove them. So the metal saw took off the protruding ends.

Philips removed some screws to make room for the shelves.


-
-
@SirVicaLot said:
**Day 6
**
A picture I can‘t miss during a challenge I participate in:

Large blade to cut some fruit for my oatmeal bowl.
That's nice, kinda like Nix's chicken in the challenge!
@Alan K. said:
Day 06
I finally got to use the screwdriver on the CT-41. I used it to tighten a cabinet door handle.
Do you think the longer driver here makes it a better screwdriver than the usual inline philips?
Discovered a new function of the XLT: Overkill. Don't know which function to use today... ::)
Did you end up using any?

@Sos24 said:
Here are a couple of pictures of the Champion with it done.



I noticed on my Yeoman the string (unbraided piece of kevlar string) I used was fraying a little, so I took it apart so you could see the pieces separately. If you use heavier thread then it will need to be shorter so as not to interfere with mini-screwdriver. Some needles are too long or thick, so you have to find one that fits. It has to be pushed in almost all the way to not to interfere with closing, but the string or tweezers can be used to pull out.
Thanks for the reference! I really like the kevlar string idea, I wonder instead of wrapping it at the base of the corkscrew, may I could heat-shrink wrap the threads and stuff into the corkscrew at the opposite end of the mini screwdriver. But I like this idea quite a bit and should find a chance to make it work. Also, I think Felix Immler has a video about how to make due needle slot in the same area, and that could provide an option to host more commonly found needle size, instead of finding one that fits(which sounds to me quite difficult)
Btw, love the Bigfoot scale and very befitting. :D
If only one day we could all print our own Vic scale on a 3d printer, I may put this on for the other side:

-
@Max Stone said:
Thanks comis. And I thought the Centurion was large.
Day 6
Just hanging around today with a couple of classics.
Nice shot! Is this from a previous car?
@CraftsmanSAK said:
DAY 6
Got a Rainier a while back and decided to clean it today when I got home from work. This is one use for the fish scaler I've done on many occasions with a little piece of cotton and it's perfect because of the width of it. I use the hook remover to push the cotton through the slot and the hook remover is great at pulling the dirty piece of cotton back out. If it's real bad, I end up soaking the knife in warm water first.@Simon_Templar said:
Day 6My favorite application...
Nice uses! Opening package is probably one of my favorite too. :D
@SirVicaLot said:
Day 6 UpdateRe-working that old pool table into shelves for the basement/storage area. Parts of the table had been assembled with heavy duty staples. Some were so wedged into the wood, I could not remove them. So the metal saw took off the protruding ends.

Philips removed some screws to make room for the shelves.

Part of the reason why I favor Mountaineer over Hunter is because of the metal file/saw, just really versatile in an urban setting.
I typically use my MT cutters on weed eater line, for fear of damaging the scissors. But, no harm done.

Vic scissors are really quite capable. I always take pretty good care of my tools such way that I never put them to the limits, but the first time I realize I might be under utilizing tools was a friend borrowing my SC and used that scissors to cut open a coke can. I thought the scissors was trashed right there and then, but turned out it was perfectly fine and continue to provide many years of service.
-
Day 7
Aftering fixing the coffee mini blender yesterday, SC helped to open a pack of instant coffee and blender helped to whip up a cup, prepping for a long video conferencing ahead.

-
Day 07
The mouse wheel didn't work anymore. Had to open the mouse and removed a nice ball of cat hair.
XLT to the rescue. Philips driver #1, tweezers, toothpick.

-
Nice pics

-
DAY 7
I used a CHAMPION to open a package that was just delivered.




-
Nice work, Ivo! Indeed good uses, y’awl, and there’s some fancy scales out there!

Day 7
CT34 mod tried to help fit my new scope, but old one had 2.5mm hex bolts, and new one uses 3mm hex bolts, neither of which is available in my CT34 mod, so my trusty old PBSwissTool set came into play. However, the scissors were needed to get the battery for the reticle illumination out of its blister pack, so CT34 mod came in handy after all!


-
The mouse wheel didn't work anymore. Had to open the mouse and removed a nice ball of cat hair.
XLT to the rescue. Philips driver #1, tweezers, toothpick.
Good use, is it a trackball? I remembered it was all the rage back then, but for whatever reason it just went away like the beta tape.
I used a CHAMPION to open a package that was just delivered.

Nice! I just ordered mine and still waiting for it to ship.
@Rizio Il Ghiro said:
Nice work, Ivo! Indeed good uses, y’awl, and there’s some fancy scales out there!

Day 7
CT34 mod tried to help fit my new scope, but old one had 2.5mm hex bolts, and new one uses 3mm hex bolts, neither of which is available in my CT34 mod, so my trusty old PBSwissTool set came into play. However, the scissors were needed to get the battery for the reticle illumination out of its blister pack, so CT34 mod came in handy after all!
PBSwisstool have some awesome hex tools, I remembered reading about them and was choosing between that or Wiha.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login