ZapWizard's Leatherman Free P4 Mods
-
Do some of the mods such as the bit drivers you have work on the K4?
-
Welcome to
philo
Hope that Zap can get back to you on this one because I am not sure

-
@hbcorpse said:
There are ways to do a DIY acid etch, if you can trust yourself and/or your hands to transfer the measurements/markings over properly...maybe stick with a quarter inch scale, so as to have less markings to transfer?I'm currently working on a stencil I could make with a vinyl cutting machine so I would have perfect spacing. I'd go the 'electro etch' path instead of acid etch as it is more consistent. Still have to do some test though, the markings are so thin I'm not sure the vinyl cutter will handle it, same thing for the etching process. We'll see.
-
@ZapWizard - Can you please design a cure for the CoronaVirus? I’m sure it would be elegant and efficient!
-
Hey in all seriousness, I hope y’all are doing ok during these strange times...
-
Howdy folks,
@philo said:
Do some of the mods such as the bit drivers you have work on the K4?Yes. The 4mm and Flat bits fit the K2 and K4. They actually fit the K2 better as it has the same philips/flathead next to each other just like the FREE P2/P4. The K4 might requires re-positioning the awl.
@Matpar_McWolfie said:
I'm currently working on a stencil I could make with a vinyl cutting machine so I would have perfect spacing. I'd go the 'electro etch' path instead of acid etch as it is more consistent.Interesting idea using acid etching.
@hbcorpse said:
@ZapWizard - Can you please design a cure for the CoronaVirus? I’m sure it would be elegant and efficient!I wish. Life is a bit strange right now. Working mostly from home these days


Regarding Rev 4 of the T-Shank holder: The good news is it works great at holding both 2mm and 1mm blades.
The bad news is that to hold 2mm blades you have to install four tiny washers because otherwise the clamp tilts and jams when the tool closes.
Those tiny washers are a pain to install, you need the hands of a watchmaker to do it without issues every time. Not something folks will want to do on the go.


To that end I have designed Revision 5
This one will use an integral clamp. The metal is flexible enough that it should work well on the 2mm and 1.5mm blades. For 1mm blades, you may need to install a 1mm shim. This can easily be made by just trimming another 1mm blade.
It will still require the two M2 screws, and an M2 tap, but hopefully will end up being the most solid option, and no too painful to change blades. The usable blade length also increase a small amount.
The screws both clamp, and hold one side of the T-Shank. You remove the two screws to swap blades. It won't have the built-in 1.5mm allen key, so I am using the 1.5mm flat bit that comes with the Leatherman replacement set, and carrying it on my holster.
I will be a few weeks till this version arrives. -

Looking forward to rev 5

Stay safe, all

-
PayPal standing by..... [emoji1]
-
The last revision looks great, Zap

-
Hi, ZapWizard.
I have a different idea for the t-shank - why not just make something that will hold the t-shank and has a flat bit-driver interface - so this would slide into your bit-driver mod and would secure the t-shank blade.
I know it isn't as integrated as many would like, but it would allow the use of full length interchangeable t-shanks.
Just a thought. Thanks for your time and your beautiful fabrication and design work and for answering your customers.
Ron. -
@mzh.arizona said:
I have a different idea for the t-shank - why not just make something that will hold the t-shank and has a flat bit-driver interface - so this would slide into your bit-driver mod and would secure the t-shank blade.The catch is that you already have to shorten a t-shank blade, if I made a flat bit holder addon you wouldn't be able to store a blade in the tool. Also, the T-Shank needs to work on the back stroke also, so it has to lock to the tool.
-
Welcome to
mzh 
-

Rev 5 of the T-Shank is working great. I had the video and product page all ready to go when I realized that I forgot to record how to tap the M2 holes. When I went and did this on the 2nd part (mirrored version) it was quite hard, and I am glad I didn't break the tap. But as always I don't want my customers to end up frustrated or scared to do a step, so I have ordered one more (Rev 6). But due to the pandemic, it will take even longer to arrive. Keep turned in. In the mean time enjoy this teaser image.
-
Your hard work is much appreciated

-

Looks great!!!
-
Wow! Very impressive!
Can you comment when you will be making them available?
-
That looks excellent

Would love to see one for the LM Wave
-
Rev 5 of the T-Shank is working great. I had the video and product page all ready to go when I realized that I forgot to record how to tap the M2 holes. When I went and did this on the 2nd part (mirrored version) it was quite hard, and I am glad I didn't break the tap. But as always I don't want my customers to end up frustrated or scared to do a step, so I have ordered one more (Rev 6). But due to the pandemic, it will take even longer to arrive. Keep turned in. In the mean time enjoy this teaser image.
That looks amazing.

-
Can’t wait to see the final version of the T-Shank-inator!
Hope everyone is safe and healthy...
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login