SAK STACK 30 days challenge 2020 for Swisschamp, Cybertool & Toolchest
-
Day 07
Just another glamour shot, but you have to admit the CT-41 is a beauty. -
Day 7

„We got ˋem, we got ˋem!! Great job, guys! Make sure they don‘t go anywhere. I am sure Lord Vader wants to chat with them...“
Used the tweezers to remove a splinter. That little bugger was embedded deep into the skin.
-
DAY 7
Glad to be home from work and I have tomorrow off since I have to work Saturday. Hoping the weather cooperates tomorrow and I can do some maintenance and tuning on a couple of dual sport bikes I like to ride. For now... just gonna write down everything that needs attention so I don't forget it tomorrow. Time to enjoy the rest of the day! -
Day 7
No action for the XLT today, so just another vanity picture

-
This one has a lot of stories to tell. Though it only opened a bag of candy today.


Corkscrew: /
Phillips: \
-
@Simon_Templar said:
Day 7No action for the XLT today, so just another vanity picture
Lego Ghostbusters! :ahhh

-
Day 7
No use today, but the Champion kept me company getting so,e fresh here.

-
-
Day 7 Update

Used the wood saw to cut a small piece of wood I wanted to use as backing. The SC saved me from having to go all the way back to the garage. This is one of the main reasons for me to carry a multitool: Quick fixes for problems, and saving me a trip to the tool box :D -
@comis said:
Kamakiri, you peak my curiosity, what is exclusive to '86 champs?In that back side pic, the awl has a different taper...starting in late '86 or so. From then on, the taper is on the tip side of the sewing eye. So the ones that are definitely '86 have the shallow taper close to the awl's pivot.
The other thing runs to about the first 4 years of Champs.
And that's not including the backsping bump either. So I guess there were three things more! I know it was sort of covered be the moving of the key ring lug.
-
@CraftsmanSAK said:
DAY 6
Got a Rainier a while back and decided to clean it today when I got home from work. This is one use for the fish scaler I've done on many occasions with a little piece of cotton and it's perfect because of the width of it. I use the hook remover to push the cotton through the slot and the hook remover is great at pulling the dirty piece of cotton back out. If it's real bad, I end up soaking the knife in warm water first.
Nice use Craftsman! I use the scaler that way too. Nice that it's thin enough to get in most nooks and generally won't scratch anything.
Also like the Rainier...best source for those 60% serrated blades!
-
@Alan K. said:
Day 07
Just another glamour shot, but you have to admit the CT-41 is a beauty.It sure is!
@SirVicaLot said:
Day 7
„We got ˋem, we got ˋem!! Great job, guys! Make sure they don‘t go anywhere. I am sure Lord Vader wants to chat with them...“
Used the tweezers to remove a splinter. That little bugger was embedded deep into the skin.
My favorite use of the tweezers!
What...what...what? Resistance just give themselves in that easy?
:D@CraftsmanSAK said:
DAY 7
Glad to be home from work and I have tomorrow off since I have to work Saturday. Hoping the weather cooperates tomorrow and I can do some maintenance and tuning on a couple of dual sport bikes I like to ride. For now... just gonna write down everything that needs attention so I don't forget it tomorrow. Time to enjoy the rest of the day!Good luck with the bike fix tomorrow!
@Simon_Templar said:
Day 7No action for the XLT today, so just another vanity picture
Good use!
These guys look ready! -
@ElevenBlade said:
This one has a lot of stories to tell. Though it only opened a bag of candy today.

Corkscrew: /
Phillips: \EB, what's the story? No holding out for us now!
:D@Sos24 said:
Day 7
No use today, but the Champion kept me company getting so,e fresh here.

Nice chilling in the sun!
Fished some stuff out from under some furniture, with the fish scaler. And I had to use the CT bit driver to retrieve the SC.
Nice joint rescue!

@SirVicaLot said:
Day 7 Update
Used the wood saw to cut a small piece of wood I wanted to use as backing. The SC saved me from having to go all the way back to the garage. This is one of the main reasons for me to carry a multitool: Quick fixes for problems, and saving me a trip to the tool box :DIs this going to help with the resistance or the shelf?
@kamakiri said:
In that back side pic, the awl has a different taper...starting in late '86 or so. From then on, the taper is on the tip side of the sewing eye. So the ones that are definitely '86 have the shallow taper close to the awl's pivot.The other thing runs to about the first 4 years of Champs.
And that's not including the backsping bump either. So I guess there were three things more! I know it was sort of covered be the moving of the key ring lug.

-
@SirVicaLot said:
Lego Ghostbusters! :ahhh
Well, you called them a few days ago and here they are!
-
DAY 8
Again one of the champions


Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
