Things are getting a bit quiet around here....
-
@Nix said:
Knife/Tool of the year sounds like fun.Did the MTo PX project break-even?
Nope.
In an effort to get the best possible price for members I overreached a bit, then didn't factor in the extra import taxes... and then shipping cost about $5 more per package than expected. Dear old Uncle Def went in the hole pretty good on that one.

Def
-
@SirVicaLot said:
I would like option three, but I cannot justify to spend so much money on a SAK. For a lot of people this would be too much money,
so I think we would not get a lot of people on board.I like the laser etching because it is more durable than the printing method, right? But correct me if i am wrong.
Scales only also sounds better to me than complete knives. It is easier and cheaper to ship. Second, there are no restrictions on shipping scales to the UK for example and third, people can put them on their favorite SAK, so we might see them pictured more often.
They wouldn't be factory scales- they would have to be aftermarket somehow, as Victorinox won't sell scales only. By the time we look into custom 3D printed or CNC milled scales, we might as well have just bought complete knives from Victorinox.
Def
-
Seems like we've come full circle and are back to a commemorative SAK, which has been my preference all along. What if you took pre-orders and had people pay first? If you fail to raise the needed funds, you could just refund everyone, but if you made the minimum then those who wish to invest, can.
-
Currently I owe everyone for a bunch of hats that have yet to materialize...

But, I can tease you about a little side project I am working on... if we hit the goal in February there may just be something very cool and new launching early in March.

Def
-
Guess i was working when the MTO branded Pioneer hit
. I missed that completely. 
@Grant Lamontagne said:
Currently I owe everyone for a bunch of hats that have yet to materialize...
But, I can tease you about a little side project I am working on... if we hit the goal in February there may just be something very cool and new launching early in March.

Def

-
I really like the idea of the MTO SAK scales but understand the concern on cost vs knife. They would be really cool if some special material like G10. I wonder if someone like Remade Knives could do one.
I also like the idea of an MTO branded SAK, knife or tool.
@Grant Lamontagne said:
If we had the up front cash to commission a run like that and then sit on it for whatever length of time we had to, it might be worthwhile.Unfortunately at this time, we don't.
I had an idea the other day that I think we could all get on board with. What is the #1 problem with EDC stuff?
Someplace to carry everything.
Sure, you could get a Skinth or a Maxpedition bag or something, but what about a truly compact and customizeable EDC carry method?
I'm thinking we build a small box, similar to an Altoids tin, but with different features like:
- Waterproofing
- Interchangeable mounting option for belt clip, MOLLE, carabiner etc
- Removable bit holder so you don't have to carry a bit set with your multitool
- Internal removable dividers for organizing smaller items like FAK things or batteries for flashlights
I'm thinking it would be relatively easy to design a small box with a removable lid, have a recess in the lid for an O Ring to seal it and then use a silicone wrist band (or similar) to hold it shut.
It would be easy to prototype a few of them, send them around to get feedback and go from there.
Thoughts? I have others if this one doesn't turn anyone's crank.

Def
I like the idea of the box for travel but prefer more readily accessible organizers for day-to-day. Now if the you had the interchangeable mounting options with removable dividers on something that was more readily accessible than a box, I would be really onboard. Maybe instead of a hard box, have it be like a drybag pouch where if you are not worried about rain or wet, it could be left open for just reaching in and grab what is needed. If a wet environment or fear of items falling out, then the pouch could be closed without removing items. It could be a waterproof material with a slider or roll top closure. The MTO logo could be on the front.
-
@Sos24 said:
I really like the idea of the MTO SAK scales but understand the concern on cost vs knife. They would be really cool if some special material like G10. I wonder if someone like Remade Knives could do one.I also like the idea of an MTO branded SAK, knife or tool.
I like the idea of the box for travel but prefer more readily accessible organizers for day-to-day. Now if the you had the interchangeable mounting options with removable dividers on something that was more readily accessible than a box, I would be really onboard. Maybe instead of a hard box, have it be like a drybag pouch where if you are not worried about rain or wet, it could be left open for just reaching in and grab what is needed. If a wet environment or fear of items falling out, then the pouch could be closed without removing items. It could be a waterproof material with a slider or roll top closure. The MTO logo could be on the front.
That's pretty cool. In addition, I always think the maxpedition drop pouch is a pretty cool idea, and if that could be made lightweight and waterproof, even better.
-
A little late to the party, but hey as far as I am concerned I am fashionably late.
I propose designing in waistband carry solutions to address the biases that exist; especially in urban areas. People at work always take a step back when someone needs a pocket knife or screw driver at work and I pull one out. Such a shame because if the tool manufacturers would just make the pocket clips a bit sturdier and thicker to allow for belt carry, we:
- Would not need sheaths (I realize many people carry more than just their tool in their sheaths)
- Could turn the tools inward and clip them over our belts versus having to hang the tools from our pants and then spend the day fixing our belts because the pants are pulled down by the tools
Just my two cents.
-
Interesting concept.
Pocket clips would be pretty simple to design and produce, but you would need to make a variety of them to fit different knives.
Or am I not understanding what you are saying?
Def
-
@Grant Lamontagne said:
Interesting concept.Pocket clips would be pretty simple to design and produce, but you would need to make a variety of them to fit different knives.
Or am I not understanding what you are saying?
Def
True belt clips would definitely be the simplest option, except for the variety that would be required.
Another option could be Kydex holsters, similar to those made for IWB carry for pistols. I am less partial to this option as that is a lot of material and I not sure about comfort. Plus the variety you’d have to make.
A third option is potentially leather holsters, similar to the Kydex option are comfort and variety.
I think a stretch sleeve with a belt clip of some kind would solve variety and comfort issues- but accessing and putting the tool knife/tool back could be difficult.
I have had good success with the Nite Ize clip installed on the LM bit card. I might just try replacing the pocket clips with the Nite Ize. I know I will be unhappy with the aesthetics, but that may be the most direct solution for now.
-
-
That sounds a little bit like the Victorinox belt hanger. Or do I have a wrong picture of your idea?

This one:

-
@SirVicaLot said:
That sounds a little bit like the Victorinox belt hanger. Or do I have a wrong picture of your idea?
This one:

You’re definitely on the right track! Not exactly that. Thinking more of a power tool belt hanger, that would allow you to then clip your tool/knife pocket clip to clip onto. I’ll post a pic later when I’m home if the idea of the concept using a Makita drill belt clip.
-
Carrying our tools is one area I mentioned early on that could be a idea. The box idea for me would not be something I'd carry. I'm wanting a small set up personally. I do believe a way to carry our gear is a great idea. We don't have to reinvent the wheel tho. We've seen a lot of leather DIY projects for SAK, slippies, and MTs. Members in the LM forum have commented on the lack of quality leather coming from MT makers. They and I talk about the good quality sheaths from LM early days.
Lots of small companies have got on board to make all sorts of sheaths for SAKs, slippies, MTs, pads and pens. I've made a few myself. I believe there is room for OUR members items to choose a MTO branded carry system.
Maybe start with SAKs? Offer an option in each size. Brand it with the Swiss Army Knight logo. Take preorders and possibly team with a leather maker instead of starting a whole new business.
Accessories. I mentioned a ferro rod of some sort. Look at what firefly is currently doing. They raised 90K and possibly still growing.
I like the idea of a set of scales. Folks seem to like the Nylon SAK scales. We don't have to reinvent the wheel. Make them plus + scales. Yes you read that correct, PLUS PLUS scales. On my Ruby + scales I see a unused slot already milled out. Its on the corkscrew side. Y'all know what I'm talking about? Victorinox didn't open the end tho. We could make Nylon plus + scale and include a tool of some kind.
What about adding something there? MINI Sharpie. MINI Diamond file. MINI ceramic stone. TIC tool. Dyneema cordage.
-
What about a Diamond and Ceramic rod corkscrew accessories? The ferro rod is a great idea ( from that company ) but we all need to sharpen our blades at some point?
-
Not trying to rip anyone off but also not trying to reinvent the wheel, lets just add a spoke to it.
EDC people want to carry their cool gear. The want all "bases" covered. Branded items work well because people like to support and show off their alliances. MTO and Swiss Army Knight branded items to my mind would be great.
Here's a cool EDC carry organizer.
https://www.etsy.com/uk/listing/547878324/small-pocket-organizer-small-edc-pocket
-
A means to sharpen the tools would be a good idea. I know there are already those small sharpeners you can put on your keychain, but I dislike those. Another thing you have to carry. How about a magnetic honing stone? Similar to the magnetic ferro rod Syph does on some of his mods. That way it could be used on any MT, not only SAKs.
-
@Mcfal12 said:
You’re definitely on the right track! Not exactly that. Thinking more of a power tool belt hanger, that would allow you to then clip your tool/knife pocket clip to clip onto. I’ll post a pic later when I’m home if the idea of the concept using a Makita drill belt clip.This isn’t an exact match, but the concept for what I was thinking of for in waistband carry solution with existing tool pocket clips




Sent from my iPhone using Tapatalk
-
@Mcfal12 said:
A little late to the party, but hey as far as I am concerned I am fashionably late.I propose designing in waistband carry solutions to address the biases that exist; especially in urban areas. People at work always take a step back when someone needs a pocket knife or screw driver at work and I pull one out. Such a shame because if the tool manufacturers would just make the pocket clips a bit sturdier and thicker to allow for belt carry, we:
- Would not need sheaths (I realize many people carry more than just their tool in their sheaths)
- Could turn the tools inward and clip them over our belts versus having to hang the tools from our pants and then spend the day fixing our belts because the pants are pulled down by the tools
Just my two cents.
@Mcfal12 said:
This isn’t an exact match, but the concept for what I was thinking of for in waistband carry solution with existing tool pocket clips
Sent from my iPhone using Tapatalk
I live in a metropolis area, so I always look out for subtle carry solutions. I think the concept of carry a tool like a power drill is interesting, it would be great if it can be a direct replacement to current clip while keep its profile relatively low and slim. But one question--with the multitool out dangling, wouldn't it attract more attention than a stationary sheath?
-
@comis said:
I live in a metropolis area, so I always look out for subtle carry solutions. I think the concept of carry a tool like a power drill is interesting, it would be great if it can be a direct replacement to current clip while keep its profile relatively low and slim. But one question--with the multitool out dangling, wouldn't it attract more attention than a stationary sheath?Hi Comis
The idea is the belt clip goes over the belt, enabling the pocket clip that our tools come with to clip onto the belt clip. Effectively, a universal belt clip that converts pocket clips into belt clips. In turn that enables concealed carry in waistband options for tools that come with clips that won’t fit onto a belt.
Ultimately if the manufacturers would just offer belt clips versus pocket clips, or at least clips that aren’t so narrow and snap with any force when pried away from the tools; this wouldn’t be needed. A belt clip can work for pocket carry, but a pocket clip will never work for belt.
As it stands today, I carry in waistband with the pocket clip over the waistband and behind the belt. The issue I run into is that the LM and my knife weigh down the waist bland and the waistband twists under the belt and needs constant adjustment.
I know I am not doing the best job explaining this; thanks for everyone’s patience.
Sent from my iPhone using Tapatalk
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login