SAK STACK 30 days challenge 2020 for Swisschamp, Cybertool & Toolchest
-
Day 10
I am slowly getting used to having the XLT in my jeans pocket and actually carry it around more and more, even though I am at home all the time. And while there is no question that this beast is total overkill in everyday life, at least in mine, it's equally doubtless a fascinating and brilliant piece of kit. More importantly, it makes you dream of adventure whenever you fondle it. I just love it.

-
Day 11
After reading SVL's post, I took the initiative to test out the SC's phillips vs a more slim CT mini screwdriver. I want to see/feel the difference between different phillips and how the body affect how well it works. It's nothing really scientific, just a phillips screw and a piece of semi soft wood. I use the awl to pre-drill a hole, then use the screwdrivers to drive a screw in and out, and repeat the whole process couple of times for each tool.
I think all in all, the longer mini screwdriver on CT just takes less effort, it is hard to put it in numbers, but it felt 20-30% easier? It is easier to feel the different after you do the same thing couple of times quickly. The SC phillips being a little lopsided is slightly less convenient to use, it is noticeable but probably still far better than any backside phillips.
A funny question comes into mind--I am sure Vic knows it may be less convenient to use a phillips lopsided, but why would they still set up the SC such way? Ideally, wouldn't it be a better tool to switch scissors(or pliers) and phillips/magnifier around? Or do you think this is optimal since it works better for the magnifying glass?

-
@Simon_Templar said:
Day 10I am slowly getting used to having the XLT in my jeans pocket and actually carry it around more and more, even though I am at home all the time. And while there is no question that this beast is total overkill in everyday life, at least in mine, it's equally doubtless a fascinating and brilliant piece of kit. More importantly, it makes you dream of adventure whenever you fondle it. I just love it.
I remember how cool it was to flip thru the different tools when I first got my SC, and it made me felt like I could take on the world with a Swisschamp. I bet I could still find the same feeling that once I swap to start carrying the XLT or XAVT. -
@ElevenBlade said:
Day 10Opened a bottle last night... nothing today yet.
Screwdrivers. When I started a new job years ago, they said I'd need a multitool. I'd gotten a Leatherman a few years prior, and had used it for working on the guitar, and for pulling hot pots off the fire on camping trips. So I brought the Leatherman to work, eventually switched it out to a Gerber, and kept the tool on my belt even after I got home from work. I kept the folding knife on the dresser.
I started using the screwdrivers for both their intended and unintended purposes. I noticed things getting a little easier and safer, and I was saving the sharps for slicey and dicey things. Once I put the MT in the bag and the SAK in the pocket 13 years ago, I was well into the habit of using the screwdrivers.The versatile size, sturdiness, and half-stop. What's not to like? The combo tool on the Compact is better at opening bottles, I think. But there's plenty of options of the SwissChamp, and that makes up for it

Corkscrew: /
Phillips: \The screwdrivers are one of the main reasons for carrying a SAK. Especially the SC / CT / SC XLT has a lot of different screwdrivers. So you're prepared for the task. I like the bit driver from the CT the most.
-
@Simon_Templar said:
Day 10I am slowly getting used to having the XLT in my jeans pocket and actually carry it around more and more, even though I am at home all the time. And while there is no question that this beast is total overkill in everyday life, at least in mine, it's equally doubtless a fascinating and brilliant piece of kit. More importantly, it makes you dream of adventure whenever you fondle it. I just love it.
Welcome on the dark side!
The XLT is the Iron Man of SAKs. It even could fly... For a short distance.
-
DAY 11
The Cybertool 29


-
After reading SVL's post, I took the initiative to test out the SC's phillips vs a more slim CT mini screwdriver. I want to see/feel the difference between different phillips and how the body affect how well it works. It's nothing really scientific, just a phillips screw and a piece of semi soft wood. I use the awl to pre-drill a hole, then use the screwdrivers to drive a screw in and out, and repeat the whole process couple of times for each tool.
I think all in all, the longer mini screwdriver on CT just takes less effort, it is hard to put it in numbers, but it felt 20-30% easier? It is easier to feel the different after you do the same thing couple of times quickly. The SC phillips being a little lopsided is slightly less convenient to use, it is noticeable but probably still far better than any backside phillips.
A funny question comes into mind--I am sure Vic knows it may be less convenient to use a phillips lopsided, but why would they still set up the SC such way? Ideally, wouldn't it be a better tool to switch scissors(or pliers) and phillips/magnifier around? Or do you think this is optimal since it works better for the magnifying glass?

No and Yes - the off-center Phillips never bothered me because I turn the handle 90 degrees and put my thumb along the backsprings and index finger on the closed tools. Not sure if that's natural for everyone, but its something I do intentionally and it helps. The off-center magnifying lens is an advantage in my estimation.
-
After reading SVL's post, I took the initiative to test out the SC's phillips vs a more slim CT mini screwdriver. I want to see/feel the difference between different phillips and how the body affect how well it works. It's nothing really scientific, just a phillips screw and a piece of semi soft wood. I use the awl to pre-drill a hole, then use the screwdrivers to drive a screw in and out, and repeat the whole process couple of times for each tool.
I think all in all, the longer mini screwdriver on CT just takes less effort, it is hard to put it in numbers, but it felt 20-30% easier? It is easier to feel the different after you do the same thing couple of times quickly. The SC phillips being a little lopsided is slightly less convenient to use, it is noticeable but probably still far better than any backside phillips.
A funny question comes into mind--I am sure Vic knows it may be less convenient to use a phillips lopsided, but why would they still set up the SC such way? Ideally, wouldn't it be a better tool to switch scissors(or pliers) and phillips/magnifier around? Or do you think this is optimal since it works better for the magnifying glass?

Good test! I wonder if they don‘t move it, because it would create issues with the backsprings. Maybe a modder would know more about that

-
@comis said:
True...I guess it won't be much of a movie if he just choke everyone out like no tomorrow. But sometimes without the rules make a character truly stand out and that's probably why I would think Heath Ledger is the best Joker ever in the Batman series.I agree about him being the best Joker in the Batman series. I haven‘t watched the new Joker movie set, so cannot comment on Phoenix´ performance.
One could argue that even the joker follows a set of rules. Being crazy and unpredictable is still a confining space to work in. You sure won‘t see him show up at church in his sunday suit, if you know what I mean. -
Day 11
„Soooo, who was in charge of checking the power coupling...?“

-
The Cybertool 29

Looks like a nice day, enjoy!

@ElevenBlade said:
No and Yes - the off-center Phillips never bothered me because I turn the handle 90 degrees and put my thumb along the backsprings and index finger on the closed tools. Not sure if that's natural for everyone, but its something I do intentionally and it helps. The off-center magnifying lens is an advantage in my estimation.Interesting technique, I have always reserved this for jobs that need leverage, but who knows, it may work just as well as having the inline phillips all the way straight. I gonna bare that in mind, and try it next time.
@Simon_Templar said:
Well, in that one regard I wouldn't trust it farther than I can throw it ;)
-
@SirVicaLot said:
Good test! I wonder if they don‘t move it, because it would create issues with the backsprings. Maybe a modder would know more about that
It actually won't interfere with back spring, because each back spring works exclusively for its own layer only. I know some traditional knives may use one spring for 2 layers of blade, but this is not the case here.
@SirVicaLot said:
I agree about him being the best Joker in the Batman series. I haven‘t watched the new Joker movie set, so cannot comment on Phoenix´ performance.
One could argue that even the joker follows a set of rules. Being crazy and unpredictable is still a confining space to work in. You sure won‘t see him show up at church in his sunday suit, if you know what I mean.I would think Phoenix's performance is excellent, but I think what he portrayed is no where as chaotic as Heath's(just a very different take on Joker). I think Alfred once summed Heath's Joker up really good:
"Because some men aren't looking for anything logical, like money. They can't be brought, bullied, reasoned or negotiated with. Some men just want to watch the world burn"
I think of all the batmen series, Christopher Nolan's the best. In fact, most filmed by Christopher Nolan in recent years are usually pretty good.
-
@comis said:
Looks like a nice day, enjoy!
Interesting technique, I have always reserved this for jobs that need leverage, but who knows, it may work just as well as having the inline phillips all the way straight. I gonna bare that in mind, and try it next time.
Dito, will try this too though, where space permits to do so

-
@SirVicaLot said:
Day 11„Soooo, who was in charge of checking the power coupling...?“

Wow....what's happening here?! Looks like they just got sacked by the Fight Team Mega Squad Plus?
-
@comis said:
It actually won't interfere with back spring, because each back spring works exclusively for its own layer only. I know some traditional knives may use one spring for 2 layers of blade, but this is not the case here.I would think Phoenix's performance is excellent, but I think what he portrayed is no where as chaotic as Heath's(just a very different take on Joker). I think Alfred once summed Heath's Joker up really good:
"Because some men aren't looking for anything logical, like money. They can't be brought, bullied, reasoned or negotiated with. Some men just want to watch the world burn"
I think of all the batmen series, Christopher Nolan's the best. In fact, most filmed by Christopher Nolan in recent years are usually pretty good.
Yepp, that was a pretty good way to sum it up. And I agree on Nolan. Inception and Interstellar were awesome movies as well. At least in my book :D
-
@comis said:
Wow....what's happening here?! Looks like they just got sacked by the Fight Team Mega Squad Plus?Well, someone forgot to make sure the power coupling was secured, and it exploded because it wasn‘t :D
I just hope the new scales will show up soon, or i‘ll have a naked SAK for a while :ahhh
-
@comis said:
A funny question comes into mind--I am sure Vic knows it may be less convenient to use a phillips lopsided, but why would they still set up the SC such way? Ideally, wouldn't it be a better tool to switch scissors(or pliers) and phillips/magnifier around? Or do you think this is optimal since it works better for the magnifying glass?
I always think it (in line Phillips) should be near the openers. Especially on a wide SAK. If not, getting a screw near an interior 90° corner would be impossible. Near the edge, it’s just inconvenient.
-
@SirVicaLot said:
Yepp, that was a pretty good way to sum it up. And I agree on Nolan. Inception and Interstellar were awesome movies as well. At least in my book :D
@SirVicaLot said:
Well, someone forgot to make sure the power coupling was secured, and it exploded because it wasn‘t :DI just hope the new scales will show up soon, or i‘ll have a naked SAK for a while :ahhh
Kinda reminded me about Max's naked series. :D
@kamakiri said:
I always think it (in line Phillips) should be near the openers. Especially on a wide SAK. If not, getting a screw near an interior 90° corner would be impossible. Near the edge, it’s just inconvenient.Do you mean a screwhole like the picture below? You are right, that'd make sense:

-
Max´ naked series was refined, mine is more...uhm...unrefined... :D
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login