SAK STACK 30 days challenge 2020 for Swisschamp, Cybertool & Toolchest
-
@Antti Lammi said:
I also hope Vics is gonna make more bits for CT i would like it cause it makes CT even more variable than everOnly Tools Matters
I have some a bit set that will very loosely fit into the driver, but has zero retention and the quality is low. Any brand of bits you'd recommend that will work well with the CT?
@Simon_Templar said:
Day 11Doing the right thing.

-
@comis XAVT vs. Workchamp XL would be a battle of giants.
@simon_templar The XLT ist very good for EDC. The Workchamp XL is not. It's too big and frankly a better shelf queen.
Why isn't there a Workchamp XLT with the bit driver and an extended bit kit?

-
-
@ulzhan said:
@comis XAVT vs. Workchamp XL would be a battle of giants.@simon_templar The XLT ist very good for EDC. The Workchamp XL is not. It's too big and frankly a better shelf queen.
Why isn't there a Workchamp XLT with the bit driver and an extended bit kit?

What a great mod suggestion, thank you!

@Antti Lammi said:
Wiha microbits is what i recommend to use. It has great variety of bits.Only Tools Matters
I love Wiha, they are one of the best!

-
Day 12
It’s still warm and sunny here, so time to get sowing, scissors on the SC open up a pack of dwarf peas - with luck these won’t grow too tall for my pea sticks!

-
Day 12
The robovac needed cleaning again.

-
**Day 12
**
SC handing over to XLT, I kinda look forward testing out the different phillips on the XLT to see how lopsided philips compares to the mini screwdriver
-
The robovac needed cleaning again.
Looks like you have a similar one to mine. I used mine a lot, but noticed lately that I have a lot of micro scratches on the hardwood floors. They are starting to show, because it always drives a similar pattern while cleaning. Have you noticed anything like that?
-
@comis said:
Is that a break-away connector I see there? That's smart. Too often I have seen people putting lanyard on their neck without the break away and always can't help but to think how resilient is the 550 if it chokes on me.That was the most important part for me to salvage from the old ID badge lanyard, for safety. It's one of the more durable ones I've seen. I've had two different ones that broke on an old Fox 40 whistle lanyard I was using; and on this one, it seemed to be of stronger plastic.
I've dragged stuff weighing 100 pounds by tying 550 cord to it. Thus, I'm sure that if I got hung up on it, it would probably kill me.
-
@cody6268 said:
That was the most important part for me to salvage from the old ID badge lanyard, for safety. It's one of the more durable ones I've seen. I've had two different ones that broke on an old Fox 40 whistle lanyard I was using; and on this one, it seemed to be of stronger plastic.I've dragged stuff weighing 100 pounds by tying 550 cord to it. Thus, I'm sure that if I got hung up on it, it would probably kill me.
That's good safety precaution, make perfect sense!
-
Day 12
“Ok guys, let’s clean up this mess. Nothing happened. Nobody saw a darn thing
”
-
@SirVicaLot said:
Looks like you have a similar one to mine. I used mine a lot, but noticed lately that I have a lot of micro scratches on the hardwood floors. They are starting to show, because it always drives a similar pattern while cleaning. Have you noticed anything like that?Don't know. There are a lot of scratches but they mostly look like cat scratches on the wood here.
That robovac is really useful...
-
@comis said:
**Day 12
**
SC handing over to XLT, I kinda look forward testing out the different phillips on the XLT to see how lopsided philips compares to the mini screwdriver
Day 12
Cool handover comis

Was busy finishing a couple overdue projects today. Stag horn upgrade on an old Huntsman and a bladeless SAK (file/drivers/scissors).

Enjoyed the S54 these last 3 days. Was ok on a short belt suspension clip. No quite the beast to carry I was expecting.

-
Day 12
Replacing a broken lock collar on an awning support arm required first the large flat blade to release the support arm from its bracket, then the file/metal saw to cut off the broken collar. Finally, I used the pliers to tighten the thumb screw on the lock collar just a bit more than I could by hand, but supporting the awning with one hand and tightening with the other meant I couldn't take a picture of that step. -
Day 12
Used the file on a fingernail last night - because it was right there.
I have a strained relationship with the file, as many of you know. I avoid getting SAKs with a file, my Gerber MP600 would be the perfect work MT if it had something else instead of that darned file... you get the picture. But one evening in 2007, the file saved the day. At that point in my life, I'd left the job where I carried the MP600, and switched to a LM Wave for EDC. I was back to using the knife most often, and the can opener was #2, since it was the only one I had. Because the knife was coming in handy with preparing lunch on the go, I already had it in mind to switch to a SAK. The question was - which one? The Spartan Lite was a top contender since I was also carrying a flashlight on my keys, but the Fisherman was also up there - oddly enough, I was using the ruler on the MP600, and missed that on that OG Wave.
So back to that evening - a door latch bolt failed and I was stuck in one part of the house. I had my Leatherman on me, so I set to work getting myself out. After several minutes - nothing was working - though I was admittedly being careful not to damage the tool any more than the lock. None of the four flatheads was the right size or shape. At a loss, I got the old trusty Champion. Deciding which tool to use - I decided upon the file. It was long, flat, tapered to a point. With the file in hand, I was able to extricate myself through the door in less than a minute.
The Champion went in the pocket, and the Wave went on the shelf. The very next day I was enjoying lunch with the Champion.
Since then, it's mostly been used to file down sharp plastic edges, and it's not something I need to keep in my pocket. I occasionally use it around the house, and I prefer using the one on the Leatherman. Anymore it just gives the Swisschamp an identity - something I'd grab to solve a problem.

Corkscrew: /
Phillips: \
-
Great story EB.

I’m often not sure where the file come in as a ranking. Normally I put the wood saw above it, but stuck at home, the file probably makes more sense.

-
I use more the saw teeth on the file, than the file itself. It is good in getting into tight spots, that my other metal saws won’t ever fit in

-
DAY 12
HAPPY EASTER!!!
Work was slow today outside of running a line down through the woods just to the east of the middle of nowhere and just north out of shouting distance of another living soul... but later on I happened across what will potentially be a project box for switching between radios/scanners in the setup in my truck. Then, when I finally got home... I was feeling a bit Irish :D -
@Max Stone said:
Great story EB.
I’m often not sure where the file come in as a ranking. Normally I put the wood saw above it, but stuck at home, the file probably makes more sense.

Good question - I think I've used the saw most often than the file at home too. Over the years - I've cut a lot of wooden dowels and branches for indoor plants and other various projects around the house. I cut a block of paraffin wax for some reason - and that went better than expected. (to clean it I cut through a branch, and that was it) I've filed down broken edges on things - but otherwise, things I have around the house generally don't change shape and need filing suddenly.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login