Thumb Stud Mod
-
I added a thumb Stud to my Huntsman Lite, but the spring tension is an issue. Does anyone know how I would go about decreasing the spring tension so that the blade is easier to open. Preferably without needing to take apart the knife.
And for anyone wondering how to drill the holes (which was the hardest part) you need to use diamond coated bits. I personally used these and they worked perfectly. https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F183728839337
As far as cutting out the scale and metal, any standard Dremel bit can handle that pretty easily.

-
Thats a first. I don't know but kudos to you.
-
That is a interesting idea

Not sure if you can change the tension
without having to dismantle the SAK
-
Syph007 did one on an alox solo several years back. Can’t seem to find a picture right now...
This one looks good, too!! [emoji1303]
Sent from my iPhone using Tapatalk
-
Interesting idea - nicely executed, sir!

-
It’s been done before, but nice to see another one made.
The work to reduce opening effort can be done without taking the knife apart, but would be difficult to polish the area so it operates smoothly.
The round of the tang needs to be transitioned to the corner that is exposed when the blade is open. So tape it up if you are going to try. A taped up diamond file should work for the bulk of reprofiling. Sandpaper on the same file would work for polishing smooth.
Despite being able to do it that way, I think it would make more sense to take it apart.
-
For those curious I just hammered a small screwdriver in between the knife base and back spring. It loosened it up just enough to where I can open it easily enough now. Be careful to not bend it back too much. I tested out this technique on my other knife first and the tension is very loose now
-
Bending the spring like that also means it won’t stay open very well and will be easier to close accidentally.
-
@kamakiri said:
Bending the spring like that also means it won’t stay open very well and will be easier to close accidentally.Well that's exactly what happened with the first knife I tested the method on. I only did it very slightly, and it opens easily enough for me to actually be able to use the thumb stud, but luckily it still snaps into place very tightly
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login