SAK STACK 30 days challenge 2020 for Swisschamp, Cybertool & Toolchest
-
I pinched the light and magnifier layer from a CT lite to add to a Compact to make my InvesTigator - the light, well the newest clear LED version at any rate, is very handy, and I use it a lot in the darker months and for short trips it means you don’t need a separate torch (very useful if careless dog walkers have been there before you seeding the path with “presents”!!).

-
Day 13
A lovely spring day. Good thing to have a balcony and a cold one.


-
Day 13
S54 handing off to CT-29. From 10 layers to 3. Although the CyberTool Small is listed by Victorinox as having 27 functions vs. the 32 they list for the S54. But the numbers do not give a real comparison as the CyberTool is just a Spartan with a bit driver.


-

@Rizio Il Ghiro said:
I pinched the light and magnifier layer from a CT lite to add to a Compact to make my InvesTigator - the light, well the newest clear LED version at any rate, is very handy, and I use it a lot in the darker months and for short trips it means you don’t need a separate torch (very useful if careless dog walkers have been there before you seeding the path with “presents”!!).I remember seeing the InvesTigator in the past, wasn't there a survey on what to name it?

@Simon_Templar said:
Day 13A lovely spring day. Good thing to have a balcony and a cold one.

Enjoy the rest of the day!

@Max Stone said:
Day 13S54 handing off to CT-29. From 10 layers to 3. Although the CyberTool Small is listed by Victorinox as having 27 functions vs. the 32 they list for the S54. But the numbers do not give a real comparison as the CyberTool is just a Spartan with a bit driver.

Totally agree, it surely would have been confusing if you go by 'use' or 'function'.

-
@Simon_Templar said:
I think this and the CT34 might be the best stacked SAKs for urban life. Swisschamp and CT41 are great but have too many outdoor features, CT 29 lacks scissors. What do the other knights think?I do love my 34 for, as you say, indoor and technical use.
My SwissChamp is fairly new to me (Christmas 2019 gift), but it has proved an amazing outdoor friend. :)
-
@Simon_Templar said:
Day 13A lovely spring day. Good thing to have a balcony and a cold one.

The few times I’ve had a balcony, I did enjoy it.

-
@Rizio Il Ghiro said:
Nice work and pics, everyone!
Day 13
Starting off a new mod project, so the donors are a cheaply acquired Explorer and Compact which I will use to make a Yeoman in due course and some spares left over for the future - step one, using my PBSWISSTOOL bradawl and the can opener on the SC to remove the scales once they’ve left to warm in the sun to make them easier to remove

@Rizio Il Ghiro said:
I pinched the light and magnifier layer from a CT lite to add to a Compact to make my InvesTigator - the light, well the newest clear LED version at any rate, is very handy, and I use it a lot in the darker months and for short trips it means you don’t need a separate torch (very useful if careless dog walkers have been there before you seeding the path with “presents”!!).Love that tool set
@Max Stone said:
Day 13S54 handing off to CT-29. From 10 layers to 3. Although the CyberTool Small is listed by Victorinox as having 27 functions vs. the 32 they list for the S54. But the numbers do not give a real comparison as the CyberTool is just a Spartan with a bit driver.

Drastic size difference there.
-
Day 13
Opened a package today
Once I went back to SAKs, after having used the file to fix a door and deciding that I didn't need to EDC a plier based MT any more, the only thing I regretted was not making the switch sooner. Oh... the amount of grease and metal shavings I must have eaten along with my fruits.
I essentially reserved the longer blade on the SAK for food prep, and the smaller blade did everything else.Years before I ever started down the multitool path, I had a couple of brief entanglements with traditional slipjoints. One was a Buck 309, where I got quite used to smaller precise tools instead of heavy-duty folder. The small blade on the Champion had always done most of the work, even when I first got it - carving and making feathersticks, cutting paper, cardboard, rope, you-name-it. I've found that if you're precise and careful, a smaller blade can be kept razor sharp. Although its a bit gunked up from cutting more packing tape than I should have, its still the most used tool on my 91mms by far. I usually EDC an Alox or a Compact, but whenever I do have a small blade, it's the go-to.

Corkscrew: /
Phillips: \
-
Cool pic.

-
Day 13 of 30
Toothpick and scissors was used today.

Only Tools Matters
-
Day 13
Snipped another tomato today.
-
DAY 13
Today, my SC had the most important duty of all - providing access to lunch. If I lived in Alaska I would probably be eating fresh salmon from the rivers everyday!
-
@Simon_Templar said:
I think this and the CT34 might be the best stacked SAKs for urban life. Swisschamp and CT41 are great but have too many outdoor features, CT 29 lacks scissors. What do the other knights think?Hmmm...that's an interesting question. I am slightly biased towards the SC since that grew up with me. Beside the basic opener/blade layers, CT34 also has the pliers and mag/led layer which I think is just alright. I'd much rather to trade in the led for an inline phillips and possibly even loss the pliers for a slimmer EDC carry.
@ElevenBlade said:
Day 13Opened a package today
Once I went back to SAKs, after having used the file to fix a door and deciding that I didn't need to EDC a plier based MT any more, the only thing I regretted was not making the switch sooner. Oh... the amount of grease and metal shavings I must have eaten along with my fruits.
I essentially reserved the longer blade on the SAK for food prep, and the smaller blade did everything else.Years before I ever started down the multitool path, I had a couple of brief entanglements with traditional slipjoints. One was a Buck 309, where I got quite used to smaller precise tools instead of heavy-duty folder. The small blade on the Champion had always done most of the work, even when I first got it - carving and making feathersticks, cutting paper, cardboard, rope, you-name-it. I've found that if you're precise and careful, a smaller blade can be kept razor sharp. Although its a bit gunked up from cutting more packing tape than I should have, its still the most used tool on my 91mms by far. I usually EDC an Alox or a Compact, but whenever I do have a small blade, it's the go-to.

Corkscrew: /
Phillips: \Before MTO, I don't think I've ever make distinctive use of blades, i.e. I kept mixing the use and have to clean both blades for food almost everytime. But the large blade for food, and small blade for everything else really does make a lot of sense. I'd also learn about using the awl for the box opening, so less chance to gunk up the small blade, but I kept on forgetting it still.

@Antti Lammi said:
Day 13 of 30Toothpick and scissors was used today.

Only Tools Matters

@Alan K. said:
Day 13Snipped another tomato today.
What are we making?

@CraftsmanSAK said:
DAY 13
Today, my SC had the most important duty of all - providing access to lunch. If I lived in Alaska I would probably be eating fresh salmon from the rivers everyday!You don't happen to know John West...do you? :D
https://www.youtube.com/watch?v=CVS1UfCfxlU -
Day 13
Needed to do some minor repairs on the fence after some high winds. The Champion helped prior open a box of nails and pry out some old nails before replacing on the fence. The Champion also screwed in and tightened some screws on the gates


The Champion also opened up a bag of dog treats, some of which got cut up and some vacuum sealed.
-
@Sos24 said:
Day 13
Needed to do some minor repairs on the fence after some high winds. The Champion helped prior open a box of nails and pry out some old nails before replacing on the fence. The Champion also screwed in and tightened some screws on the gates


The Champion also opened up a bag of dog treats, some of which got cut up and some vacuum sealed.
Good uses!

-
-
Day 13
Opened more packages. Still not my replacement scales


Also used the bottle opener to pry open a can of paint. Did some touch-ups around the house. This was the first day of the stay-at-home order that I was really bored :-\
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

