Antler bone scales build
-
@Max Stone said:
Only real issue was that I used a permanent marker to trace the scales and it soaked into the horn. So lesson learnt.Upon closer inspection YOU ARE CORRECT. The permanent marker made of mess of this project. Send to me and I will dispose of this mess promptly ;)
-
On its way :D
-

The Swisschamp will look amazing. Maybe after that you could do a 111mm?
-
I’m still to get into 111mm. But first need to find some more raw material...
And I should be getting my jig for drilling 91mm liners soon, so I can look at doing brass liners to match. Would be a nice project.
-
Fantastic, Max! Really nice job.
Myron
-
Great work 
-
Max, that's great job!
Did you use a punch to do the job? The dome shape is really well formed!
-
Thanks Myron, Sir Vic, comis, Steve.

Comis, no punch. Just some careful tapping with a ball hammer around the edge of the rivet. I then polish up with a soft wheel on a Dremel. I did a little wire brush work to get a lighter colour on the horn which has scratched up the rivets a little, bit the pic below shows the detail.

Btw, a long soak in Acetone sorted the permanent marker (sorry Aloha, this one’s a keeper). :)

-
Fair enough.That peen work is wonderful. I want to see a full range of SAKs with your wonderful scales.
-
The rehandle, with the stag, looks amazing.
-
@Max Stone said:
Thanks Myron, Sir Vic, comis, Steve.
Comis, no punch. Just some careful tapping with a ball hammer around the edge of the rivet. I then polish up with a soft wheel on a Dremel. I did a little wire brush work to get a lighter colour on the horn which has scratched up the rivets a little, bit the pic below shows the detail.

Btw, a long soak in Acetone sorted the permanent marker (sorry Aloha, this one’s a keeper). :)
Thanks for the explanation, and this is looking even better with the clean up! Awesome job!
-
nice work

-
Thanks PitCarver, comis, hulk.

Aloha, you must not tempt me...how about this for a matching set of customs, all with stag horn:
84mm = Lumberjack
91mm = Yeoman
111mm = Skipper ProIn a nice presentation box?

-
Excellent, good work Max

-

And a VERY nice plan!
-
That looks great Max!
And I just saw your comment on my blog ;)
-
Ha-ha, you have the OG stag version Reinier!

(But I did borrow the 2-rivet idea from your pic)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
:D