Climber Lite with removable LED module
-
Iβve been thinking about this mod for about 6 months, so eventually gave it a go.

The idea is that the LED is a great little close-proximity light, but has 2 major issues:
- You canβt get water near it, and
- You canβt use the LED independently of the SAK
So what if you could clip it off?

The LED module is used without opening it out of the SAK, and it only rotates 90deg to expose the battery compartment. So I figured a simple cut-out slot will allow the module to be lifted out when rotated up, but will still keep the module retained when itβs down.
The problem is that the liners and tools could all slip along the exposed pivot if you simply remove the module, so a tube spacer is needed to keep everything still tight when the LED is out.
I found a nickel-plated brass ferrule the perfect size, 2.5mm hole, 4mm outer diameter. Just needed trimming down to the correct length of 2.9mm to act as a spacer.
Here you can see an original ferrule and the spacer completed. I drilled out the module to 4mm and did a test fit. Then cut the slot, making this slightly less than 4mm so thereβs a positive click when it clips onto the spacer.





-
Next was to reassemble everything...
I used a Spartan Lite as the donor SAK, and added a scissors layer that I had left over from another build.
Victorinox donβt do this config. The closest is the 5 layer Huntsman Lite, but this is getting a little big for EDC.
With the inline Phillips, this is effectively an Explorer with the LED instead of the magnifier. And now that the LED is removable, why not have a magnifier that can slot in?

So I followed a similar slot direction as used on the Rescue Toolβs removable blade, and it works, but...as the Lite models swap around the Phillips to the opposite end, the magnifier does not close fully. But you can use it in the open position.
What else could you clip into this new mounting point?

Very happy with the result. You do lose backspring tension on the Phillips when the module is out, but I did not want to use a larger diameter spacer otherwise the slotted area would be too weak. Itβs a small compromise for a far better tool imo.





-
Very nice! Great idea and good job

Sent fra min FRD-L09 via Tapatalk
-
Thanks RF52.

-
Excellent idea and great work

-
Cool mod.
-
-
I would call it an enlightened mod :D

-
Thanks Wim, π, magentus, Sir Vic.

...just a light mod to brighten-up the day.

-
Nice mod! One of those that should be original som the beginning
[It's not failure if you learn something from it]
-
This is an excellent mod!
What else could you clip into this new mounting point?
A USB stick? Like they do on the 58mm models?
A fork or spork, (would have to be longer though), like a hobo knife. -
Brilliant and simple!

How easy is it to remove and insert? -
Neatly done!

-
Thanks guys.

Yes, USB may be an option. Maybe even a small spork.
Itβs really easy to clip on and off. Victorinox use a good quality plastic thatβs not brittle, so it snaps over the pivot with a good positive click, and wonβt fall out as itβs locked in when closed.
Hereβs a video I did to show it better: https://m.youtube.com/watch?feature=youtu.be&v=6uFWWtP6HUo

-
I luve it!

-
Thanks Don Pablo
Now I just need to rebuild all my LED equipped SAKs. 
-
This looks awesome!
Why haven't I thought of this before?Great mod!

Enviado do meu Redmi Note 5 atravΓ©s do Tapatalk
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better π
Register Login


