SAK STACK 30 days challenge 2020 for Swisschamp, Cybertool & Toolchest
-
DAY 16
2 times SC


-
@Simon_Templar said:
Great as the XLT is, I realize more and more that the CT Lite might just be THE oversized SAK to have as a city dweller. Ulzhan, I am very sorry, but as of tomorrow I will therefore continue this challenge with the CT Lite. Hope you and the XLT won't hold it against me.No Problem! Everyone is different. What works for me doesn't have to work for you.
What are you doing now with the XLT? Does is become a shelf queen?
-
Day 16:
I'm looking at picking up an old Marklin set for pretty cheap. Given "I swear the Marklin transformer I bought worked fine when I tested it; but I ain't sure if I remember right, and it's been 2-3 years since I got it and packed it away" and who knows if anything in this old set works right (given German engineering, I'm sure; BUT there are too many factors that mess them up) I knew I'd need my meter. Unfortunately, the negative probe is busted. Used 600V MSHA grade electrical tape to hold it together (all I keep on hand; my Granddad had loads of the stuff from his years in the mines) and the Champion scissors to cut it. Anyone got an old, decent industrial-grade meter they're not using anymore? Like an Amprobe, Klein, or a Fluke? The last cheap meter I bought from Harbor Freight was a dud, and Granddad's nearly 50-year-old Amprobe is busted (broken plastic bolt that holds the amp clamp to the frame).
My checkbook probably isn't going to be happy. I know the loco will likely need new pickup shoes, and probably motor brushes. Track connectors and wiring. And the fact that A: since this set is not original; and has passenger cars; I'll be buying freight. Guess I can save some cash by trading the passenger wagons off for freight.
There's probably some wiring and track work in my future next week given I set my max bid a little high for what the condition is. Thus, CT34, some sandpaper, an ink eraser, and Leatherman Squirt EL for that.

-
I'm looking at picking up an old Marklin set for pretty cheap. Given "I swear the Marklin transformer I bought worked fine when I tested it; but I ain't sure if I remember right, and it's been 2-3 years since I got it and packed it away" and who knows if anything in this old set works right (given German engineering, I'm sure; BUT there are too many factors that mess them up) I knew I'd need my meter. Unfortunately, the negative probe is busted. Used 600V MSHA grade electrical tape to hold it together (all I keep on hand; my Granddad had loads of the stuff from his years in the mines) and the Champion scissors to cut it. Anyone got an old, decent industrial-grade meter they're not using anymore? Like an Amprobe, Klein, or a Fluke? The last cheap meter I bought from Harbor Freight was a dud, and Granddad's nearly 50-year-old Amprobe is busted (broken plastic bolt that holds the amp clamp to the frame).
My checkbook probably isn't going to be happy. I know the loco will likely need new pickup shoes, and probably motor brushes. Track connectors and wiring. And the fact that A: since this set is not original; and has passenger cars; I'll be buying freight. Guess I can save some cash by trading the passenger wagons off for freight.
There's probably some wiring and track work in my future next week given I set my max bid a little high for what the condition is. Thus, CT34, some sandpaper, an ink eraser, and Leatherman Squirt EL for that.

Nice use.
IIRC, I used to have a Fluke long ago when I was a full fledged flashaholic doing runtime test with the meter, but somehow got it lost during a move long ago. Hopefully someone could come along and be able to help.
-
More good work and pics! Comis, those fridge magnets look amazing, as does that Coach knife!
Day 16
Alan K - great to see that Ti rigging knife again - I have a ludicrously soft spot for Ti! Here’s the bit holder on my CT34 mod with the medium Philips in doing some adjustments on a Campagnolo rear mech on one of my Ti rides (just noticed that the mech has Ti written it too!)

-
Day 16
An Ode To Comis
or
How I Saw the SawWhen I was getting my first lessons in outdoorsmanship, resourcefulness with what you have - was the theme. My training on firecraft was: If you need to cut the wood with a saw, it's no good for the tinder and kindling... and once the fire is established, you won't need to cut the wood because it will burn as is. In other words, you started with narrow branches that can be snapped by hand and separated with a knife if needed, until you had enough heat to be able to burn logs. One of my mentors had a small saw on his folding knife, but I don't think he ever used it. Following suit, I was't using the saw on my Champion for processing wood for fires, and I was never in the habit of trimming standing branches to set up camp. Mainly the saw was coming in handy at home, with simple projects.
Then the multitool bug bit me.
Ever since I started pocket carrying a SAK on my outdoor adventures, I stopped carrying a hefty lockback (my woods knife of choice had been a 5 inch Camillus). Having developed a sense of what I can manage with the lockback and what burns easily, I wasn't about to change the type of wood I collected. However, switching to a smaller, sharper blade and a saw, there was value in processing wood in a more controlled manner. Brute force gave way to precision and the saw became the tool of choice for breaking down branches. The rule of thumb was now - if you can't saw it with a SAK, you shouldn't be using it for kindling.
Then MTo led me down the rabbit hole.
I got one of those legendary One Handed Trekkers. Having the bushcrafter's approval, in the world of fixies and scandy grinds, and full tangs, and Kephart blades, it had the label as a suitable outdoor knife, I figured - why not... and there we were. Though the 111mm saw is quite the saw indeed, I still prefer a medium-sized knife blade over the 111 blade for my purposes. I thought to myself - "Self".. I said, "Self..... doesn't carrying two swiss army knives defeat the purpose of a swiss army knife? One tool for every job"
So I did some research... would a 93mm Farmer be a good compromise? It turns out, Comis has carefully, methodically, and scientifically answered that question. And indeed, the saw on the Farmer is functionally no different than a 91mm saw on the Champion or SwissChamp. While a 111mm saw has its advantages in ergonomics, the 91mm or 93mm has it's own advantages in other ways.
You see - a cardinal blunder in decision making is to act upon something that seems commonsensical, when it doesn't bear out in functional outcome. Indeed in this day and age, when information is at our fingertips, and everyone has an opinion. Assumption is the mother of all... mistakes... as they say.
Why should I assume that a longer tool has a longer saw... or that a longer saw results in a faster cut? As it were - I shouldn't - and I didn't.
If it wasn't for people like Comis on MTo, I would have missed out on the advantages of the SwissChamp, the Pioneer X, the Soldier, and the Trekker. And that, my friends, is as unfortunate as if I never actually enjoyed a juicy burger because I "seared the meat and sealed the juices in" before I pressed it into the grill to hear it sizzle. Anyone who knows... really knows cooking, knows that searing doesn't seal juices, and the sizzle you get when pressing meat into a grill or pan is actually juice escaping.
What a pity it is to live a life having thrown out good options based on bad decisions, or in blissful ignorance of the good things that are right in front of us. It's people like Comis and places like MTo that can help us learn collectively and appreciate what we already have - because most of the time it's just as good as what we want.

Corkscrew: /
Phillips: \
-
Day 16
The robovac needed maintenance again. Had to remove one of the wheel subunits. Hair had crept inside the wheel which didn't sound healthy while using.
Bit driver, almost all scale tools of the XLT and the pliers came in handy. One Philips screw was too recessed. Had to cheat. The long Philips screwdriver on the Work Champ XL did the job.

-
The magnets look good Comis!
Day 16
I just did some work in the yard. Trimmed some twigs and smaller branches from the plants. The saw was used. The little use I have had this month has shown me that there is little practical difference for my purposes in whether I use the CT-41 or the Swiss Champ. Tomorrow I will switch back to the Swiss Champ for the rest of the month and I will again have the magnifying glass and the handy olive skewer (fish scaler) that are absent from the CT-41. -
@comis Those magnets do look good!
@ElevenBlade: It seems your picture is a little bit psychedelic, even if I don't have any LSD screen.
Do you use the saw often? Here it's one of the least used tools. Sometimes out in den woods, yes. At home... No.
-
@Rizio Il Ghiro said:
More good work and pics! Comis, those fridge magnets look amazing, as does that Coach knife!Day 16
Alan K - great to see that Ti rigging knife again - I have a ludicrously soft spot for Ti! Here’s the bit holder on my CT34 mod with the medium Philips in doing some adjustments on a Campagnolo rear mech on one of my Ti rides (just noticed that the mech has Ti written it too!)
Wow, Ti parts for a bike, I bet it's gonna be a great ride!

@ElevenBlade said:
Day 16An Ode To Comis
or
How I Saw the SawWhen I was getting my first lessons in outdoorsmanship, resourcefulness with what you have - was the theme. My training on firecraft was: If you need to cut the wood with a saw, it's no good for the tinder and kindling... and once the fire is established, you won't need to cut the wood because it will burn as is. In other words, you started with narrow branches that can be snapped by hand and separated with a knife if needed, until you had enough heat to be able to burn logs. One of my mentors had a small saw on his folding knife, but I don't think he ever used it. Following suit, I was't using the saw on my Champion for processing wood for fires, and I was never in the habit of trimming standing branches to set up camp. Mainly the saw was coming in handy at home, with simple projects.
Then the multitool bug bit me.
Ever since I started pocket carrying a SAK on my outdoor adventures, I stopped carrying a hefty lockback (my woods knife of choice had been a 5 inch Camillus). Having developed a sense of what I can manage with the lockback and what burns easily, I wasn't about to change the type of wood I collected. However, switching to a smaller, sharper blade and a saw, there was value in processing wood in a more controlled manner. Brute force gave way to precision and the saw became the tool of choice for breaking down branches. The rule of thumb was now - if you can't saw it with a SAK, you shouldn't be using it for kindling.
Then MTo led me down the rabbit hole.
I got one of those legendary One Handed Trekkers. Having the bushcrafter's approval, in the world of fixies and scandy grinds, and full tangs, and Kephart blades, it had the label as a suitable outdoor knife, I figured - why not... and there we were. Though the 111mm saw is quite the saw indeed, I still prefer a medium-sized knife blade over the 111 blade for my purposes. I thought to myself - "Self".. I said, "Self..... doesn't carrying two swiss army knives defeat the purpose of a swiss army knife? One tool for every job"
So I did some research... would a 93mm Farmer be a good compromise? It turns out, Comis has carefully, methodically, and scientifically answered that question. And indeed, the saw on the Farmer is functionally no different than a 91mm saw on the Champion or SwissChamp. While a 111mm saw has its advantages in ergonomics, the 91mm or 93mm has it's own advantages in other ways.
You see - a cardinal blunder in decision making is to act upon something that seems commonsensical, when it doesn't bear out in functional outcome. Indeed in this day and age, when information is at our fingertips, and everyone has an opinion. Assumption is the mother of all... mistakes... as they say.
Why should I assume that a longer tool has a longer saw... or that a longer saw results in a faster cut? As it were - I shouldn't - and I didn't.
If it wasn't for people like Comis on MTo, I would have missed out on the advantages of the SwissChamp, the Pioneer X, the Soldier, and the Trekker. And that, my friends, is as unfortunate as if I never actually enjoyed a juicy burger because I "seared the meat and sealed the juices in" before I pressed it into the grill to hear it sizzle. Anyone who knows... really knows cooking, knows that searing doesn't seal juices, and the sizzle you get when pressing meat into a grill or pan is actually juice escaping.
What a pity it is to live a life having thrown out good options based on bad decisions, or in blissful ignorance of the good things that are right in front of us. It's people like Comis and places like MTo that can help us learn collectively and appreciate what we already have - because most of the time it's just as good as what we want.

Corkscrew: /
Phillips: \EB, you should you didn't confuse me with someone else?
Seriously, if I were to have the budget for a media team, you will be on top of the list! Btw, I am CCing this to Mrs, there is no better way to write a love letter than this. :DThe robovac needed maintenance again. Had to remove one of the wheel subunits. Hair had crept inside the wheel which didn't sound healthy while using.
Bit driver, almost all scale tools of the XLT and the pliers came in handy. One Philips screw was too recessed. Had to cheat. The long Philips screwdriver on the Work Champ XL did the job.
Great use! This got me curious--I don't use the Workchamp enough to be familiarized with the long phillips, but if there is just a way to transplant one from 111mm to 91mm, hmmm....
@Alan K. said:
The magnets look good Comis!Day 16
I just did some work in the yard. Trimmed some twigs and smaller branches from the plants. The saw was used. The little use I have had this month has shown me that there is little practical difference for my purposes in whether I use the CT-41 or the Swiss Champ. Tomorrow I will switch back to the Swiss Champ for the rest of the month and I will again have the magnifying glass and the handy olive skewer (fish scaler) that are absent from the CT-41.Thank you! Looks like a good day for outdoor work. I am still struggling to make up my mind between regular phillips vs the mini driver on the CTs, I like the versatility of the mini driver but I don't know how well do the bits stay in place in a very long run, meanwhile inline phillips is a simple robust tool that probably address 90% of my needs.
-
Day 16 of 30
Used small blade to open my packet, it contained my new Led Lenser P3R and few addons what i got for free.


Only Tools Matters
-
That’s an interesting haul, Antti - tell us more! Not seen that LED lenser before.....

-
Day 16
Glad to be handing over to the CT-34

First task, not scissors, but can opener for some rations. Nice to see a non-pull lid tin. They’re getting rarer.



-
DAY 16
The black one rode shotgun with me at work today. I used the small blade one time to open a big box of 3M wire splicing connectors. Adding to my EDC's I have a Cybertool M on the way I managed to snag for $40 that had a set of cracked scales. I'm gonna put a new set of ruby scales on this one with glow in the dark paint inside. This setup will round out anything I will probably need most days at work between a Trekker in my front pocket and the Cybertool in a back pocket. Only thing missing will be a file (which I don't use all that much personally). Hope everyone is staying healthy and safe! -
@cody6268 said:
DAY 15. Went with my Champion. Being the only SAK I'm using in this challenge that I bought new, it has some of the nicer stuff current production has, like the aggressive cut stainless file. And, lacking the thick, heavy pliers layer, a lot easier for pocket carry.:agree: When carried in my pocket organizer, I don’t notice the difference as much difference, but in the pocket alone the difference is more noticeable. I have also noticed that the Champion also feels better in the hand when using. This could vary based on hand size.
-
@comis said:
I took a few pictures here for your kind reference.

I don't know how they did it, but knowing they are leather bag maker, anything leather probably is not too challenging to them. I don't know enough about leather process to comment, but I wonder whether it will be possible to stack a few layer together, so you could make holes on the first layer or two to accompany the rivets, and white stitched them together and wood glue it onto the outer most liner(so it is semi permanent)?
That is cool.
-
Day 16
The SwissChamp helped with mail duty to include opening up a new Cybertool. The magnifying glass also came in handy reading some ingredients on a small package.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login



