SAK STACK 30 days challenge 2020 for Swisschamp, Cybertool & Toolchest
-
@Antti Lammi said:
Before i choosed this Led Lenser i was looking at Olight, Fenix and nitecore but chosed Led Lenser . I was first trying to buy Led Lenser P3 afs p, but it was out of stock and importer told me its retired flashlight so they recommended me this newer version P3R. Its bit larger than my P3 afs but it has 2 modes high ( 140 lumens) and low ( 20 lumens). This has rechargeable li-on battery.One thing what i like most of these flashlights is Advanced Focus System + Rapid Focus, i can change my beam size with one handed to small to large area fast and easy.
Only Tools Matters
I haven't checked out Led lenser stuff for a long while, and it's kinda curious why their brand has so little coverage on most forum or flashlight reviews. I wonder how do their runtime/regulation/performance vs similar priced product.
@Simon_Templar said:
Looks great, Comis. That said, no magnets are required to realize what a great and attentive host you are.
Nah, the credits go to everyone participating this challenge, you guys are the sole reason why this challenge is fun and engaging.@ulzhan said:
@comis: That sounds like an ad! ::) Do you know of such a successful philips transplantion?:D I haven't get around to it just yet, but let me look into the disassembly pictures and get back to you. But realistically, right now I am in the midst of contemplating whether it's worth transplanting the mini driver from a CT to a Mountaineer, I think that transplant will be more meaningful than probably the long phillips transplant since it has exchangeable bits.
-
Day 17
Switch to the big boy XAVT today, and been playing with the altimeter and baro meter for a little while, which reminds me to remove all batteries from the SAKs if I weren't going to use them on a regular basis. Last thing I want is to find a battery corroding inside the SAK due to my negligence.

-
Nice one comis

-
Again great pics and uses for day 16
-
**DAY 17 **
Working again on my Vic chest. The outside was already finished last year, now I'm working on the inside.




-
Getting back to you about the feasibility of installing a 111mm long phillips into a 91mm, I think it is possible, just not a direct drop in.

Got this dissembled picture from Sypn007 thread, both chassis has pivot of 2.5mm, so that's easy enough. 111mm here uses the exact same scissors from 91mm, so in terms of tool length and thickness, long phillips will be shorter than regular scissors but have the same thickness.
This is part of a picture I've taken when dissembling the 91mm Swisschamp for a job. I think if you flip the long phillips around, and install in place of the scissors, it should fit quite well. And if we were to utilize the scissors spring, one may need to do some mod work on the contact point or bend the 91mm spring slightly to make it tighter for the tool retention.
Scaling the 111mm tools exactly the same size as 91mm and overlapping them, I think the feasibility to install the 111mm long phillips in place of 91mm scissors is pretty high.
Overlapping a Workchamp XL on top of a Swisschamp. The good thing about the 111mm long phillips is there is a flip tap on top, so it is possible to retrieve the tool even if it sinks into the chassis.This are just some very rough ideas about transplanting a 111mm long phillips into a 91mm, probably more careful planning could make it a better fit better, while accommodating another tool on the opposite side.
-
This was a case of the Polish army.

This is the second one I made, the first one was for GERBER multitools.



-
Thanks, it is a lot of work but I like it

-
Excellent challenge everyone

And some great uses and nice pics

-
DAY 17
Tone generator was starting to work intermittently. Turns out the switch inside to go from a warble tone to a solid tone was losing good contact. Good to go now!


-
@CraftsmanSAK said:
Very nice!Thanks

-
@Simon_Templar said:
Looks great, Comis. That said, no magnets are required to realize what a great and attentive host you are.

-
More great uses and pics, especially the knife modding and storage boxes - really great work!
Day 17
Another long day at the keyboard, so time to open a refresher with the SC’s bottle opener - TGIF! Good job I visited the supermarket yesterday to replenish supplies!


-
thanks Rizio

-
@CraftsmanSAK said:
DAY 17Tone generator was starting to work intermittently. Turns out the switch inside to go from a warble tone to a solid tone was losing good contact. Good to go now!
Sweet fix! The only tone generator I have is one that could check the correctness of Ethernet adapter and connectivity. It's a tremendous help in terms of check whether all the ports are functioning and the sequence of the wires are installed correctly at each port.

@Rizio Il Ghiro said:
More great uses and pics, especially the knife modding and storage boxes - really great work!Day 17
Another long day at the keyboard, so time to open a refresher with the SC’s bottle opener - TGIF! Good job I visited the supermarket yesterday to replenish supplies!

TGIF! :D
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
