SAK STACK 30 days challenge 2020 for Swisschamp, Cybertool & Toolchest
-
Wow - that must feel a bit like strapping a brick (albeit a beautifully engineered one, mind you!) to your ankle!!

-
Interesting idea comis.

I think you need to be a hardcore Vic fan to carry an XAVT every day. But for the ankle, a modified magazine holster could work?
-
<u>A quick announcement about magnet mailing and logistic</u>
First, a big thank you for participating and following us on this challenge, we are almost 2/3 way finished and it really did feel faster than I expected!
Secondly, I am happy to let everybody know that Nix, my partner in crime in the upcoming MTO Unleashed and Nessmuk challenge, have been really kind to offer his help with mail forwarding in US for the magnets, which no doubt will help cut down the shipping cost tremendously. So if you are reading this, Nix, thank you so so much for stepping up to help!
Next, I have been given some thoughts about shipping the magnets once we've all finished. Considering the ongoing pandemic, I would like to postpone the shipping of the magnets for 2-3 weeks.
The reason being many parts of our world are now either experiencing lock down or just recovering from one, and it may be inconsiderate of me to just ship them all out, without considering the potential burden that may impose on mail offices(which are now probably underhanded busy dealing with medical and household supplies to the needed). Also, MTO is a big family, I would not want any of you to take unnecessary risk for getting a mail. From where I am, it takes roughly 2 weeks to reach to you regardless of where you are. Realistically, we may be looking at end of May or early June when the magnets do arrive in your mailbox. So my apology for the delay in advance, and really do hope you don't mind it too much.
Finally, on a brighter note, Nix and I have also planned free magnets for the upcoming MTO Unleashed in June and Nessmuk challenges in September, but due to logistic planning, the respective offers would have a deadline on May 4th and July 4th. So if anyone is interested, please feel free to sign up soon!



-
@Max Stone said:
Interesting idea comis.
I think you need to be a hardcore Vic fan to carry an XAVT every day. But for the ankle, a modified magazine holster could work?I think so too! But personally, I think if I were to carry a big boy with me day in and out, XLT would probably my upper most limit with a comfortable sheath. :D
-
@comis said:
If you were to pick one between the two, which one will be your favorite?
Clearly the XLT. The bits are much more robust than the screwdrivers on the WC XL and generally there are more possibilities to screw around. And it's a little bit smaller. Also no problem while on holiday because of non-locking blades.
The Workchamp XL ist mostly a shelf queen (except when there's a need for that long small philips screwdriver).
-
Great uses everyone

-
@ulzhan said:
Clearly the XLT. The bits are much more robust than the screwdrivers on the WC XL and generally there are more possibilities to screw around. And it's a little bit smaller. Also no problem while on holiday because of non-locking blades.The Workchamp XL ist mostly a shelf queen (except when there's a need for that long small philips screwdriver).
I think it would be the same answer to me too. Combination of tools on WC XL is interesting, but somehow a little bit confusing. The duplicates of both combo tool and the opener layer, clip point and spear point, long and short phillips, the WC XL truly is physical embodiment of "two is one and one is none"
:D -
**DAY 19 **
Big and small


-
Small is sweet Ivo.

Vic are still doing the little clippers, even with the old Wenger logo on the scale...

-
Day 19
CyberTool Lite on duty today. With a little friend.

Helped reattach a handle that had come off in the kitchen.



-
Now to get my hands on a PTC and I could rebuild a little beast...

-
@comis said:
I think it would be the same answer to me too. Combination of tools on WC XL is interesting, but somehow a little bit confusing. The duplicates of both combo tool and the opener layer, clip point and spear point, long and short phillips, the WC XL truly is physical embodiment of "two is one and one is none"The duplicates are one thing. Actually it's very handy there are bottle openers on both ends of that SAK. A form of luxury you'll only get there or on a XAVT.
Realistically, you have the basic tools on both the WC XL and the XLT. Main blade, scissors, pliers, screwdrivers. I also use the hawkbill blade when opening packages.
The WC XL is just a demonstration what's possible if you include (almost) every tool from the 111 mm line in one big badass knife.
-
@comis said:
<u>A quick announcement about magnet mailing and logistic</u>First, a big thank you for participating and following us on this challenge, we are almost 2/3 way finished and it really did feel faster than I expected!
Secondly, I am happy to let everybody know that Nix, my partner in crime in the upcoming MTO Unleashed and Nessmuk challenge, have been really kind to offer his help with mail forwarding in US for the magnets, which no doubt will help cut down the shipping cost tremendously. So if you are reading this, Nix, thank you so so much for stepping up to help!
Next, I have been given some thoughts about shipping the magnets once we've all finished. Considering the ongoing pandemic, I would like to postpone the shipping of the magnets for 2-3 weeks.
The reason being many parts of our world are now either experiencing lock down or just recovering from one, and it may be inconsiderate of me to just ship them all out, without considering the potential burden that may impose on mail offices(which are now probably underhanded busy dealing with medical and household supplies to the needed). Also, MTO is a big family, I would not want any of you to take unnecessary risk for getting a mail. From where I am, it takes roughly 2 weeks to reach to you regardless of where you are. Realistically, we may be looking at end of May or early June when the magnets do arrive in your mailbox. So my apology for the delay in advance, and really do hope you don't mind it too much.
Finally, on a brighter note, Nix and I have also planned free magnets for the upcoming MTO Unleashed in June and Nessmuk challenges in September, but due to logistic planning, the respective offers would have a deadline on May 4th and July 4th. So if anyone is interested, please feel free to sign up soon!



No issue with waiting a bit here. I think the idea with the magnets is awesome, thanks for doing it
Also thanks to Nix for helping out and forwarding them 
-

@Max Stone said:
Now to get my hands on a PTC and I could rebuild a little beast...

@ulzhan said:
The duplicates are one thing. Actually it's very handy there are bottle openers on both ends of that SAK. A form of luxury you'll only get there or on a XAVT.Realistically, you have the basic tools on both the WC XL and the XLT. Main blade, scissors, pliers, screwdrivers. I also use the hawkbill blade when opening packages.
The WC XL is just a demonstration what's possible if you include (almost) every tool from the 111 mm line in one big badass knife.
That indeed is true.@SirVicaLot said:
No issue with waiting a bit here. I think the idea with the magnets is awesome, thanks for doing it
Also thanks to Nix for helping out and forwarding them 

-
DAY 19
Got a plumbing project I wasn't really wanting to do today, but that's when they always need done. Drain under kitchen sink developed a pinhole. I'm not sure if it is because of the what's going on but instead of replacing metal like for like, I'm going to have to do a hodge podge today with what I could find and some of what I had thrown in the basement years back. Scaler was useful determining 1 1/4" from 1 1/2" among my old spare stuff laying around. Perfect for this job, especially looking in under a cabinet and hold it up against pipes. Actually a little better than fighting with a tape measure.
-
@CraftsmanSAK said:
DAY 19Got a plumbing project I wasn't really wanting to do today, but that's when they always need done. Drain under kitchen sink developed a pinhole. I'm not sure if it is because of the what's going on but instead of replacing metal like for like, I'm going to have to do a hodge podge today with what I could find and some of what I had thrown in the basement years back. Scaler was useful determining 1 1/4" from 1 1/2" among my old spare stuff laying around. Perfect for this job, especially looking in under a cabinet and hold it up against pipes. Actually a little better than fighting with a tape measure.
That's good use! The first time seeing people using of scaler to draw straight lines was a true a-ha moment for me.
-
Day 19
Doing a visual soundcheck.

-
Day 19 of 30
One of our kitchen cabinet door was bit loose so used SwissChamps phillips to tighten screws.

Only Tools Matters
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login