SAK STACK 30 days challenge 2020 for Swisschamp, Cybertool & Toolchest
-
@comis said:
Small world! I remember seeing your ankle FAK setup in another thread, this looks like a even more functional than the last. Though it may not as fool proof as the traditional CAT, the lightweight and application to thinner limbs really do make up for it.Actually the ankle FAK is just a picture I got online. I actually carry mine in a cargo pocket or can slide on my belt. I have a mini basic kit in my pocket organizer and a stand-alone minimal trauma kit. I carry the traditional CAT. I tried the RAT tourniquet and didn’t really like it.
Picture with compression bandage and quick-clot removed.

Picture from bottom

-
@Sos24 said:
Actually the ankle FAK is just a picture I got online. I actually carry mine in a cargo pocket or can slide on my belt. I have a mini basic kit in my pocket organizer and a stand-alone minimal trauma kit. I carry the traditional CAT. I tried the RAT tourniquet and didn’t really like it.
Picture with compression bandage and quick-clot removed.

Picture from bottom

Ahh...I see. With this setup, would you feel it might be slightly bulky in the cargo pocket? I could see the good thing about cargo pocket carry is you probably could carry this even with just wearing a cargo shorts.
-
Day 20
Champion did some package duty. Lots of goodies for me and the pup


-
Day 20. I thought the train set wouldn't show up until Wednesday, but I got mixed up with another package. It showed up today. Did a little troubleshooting. I grabbed the CT34. It's slotted bit did not fit the screw holding on the locomotive shell, so I used the can opener SD. Needed more torque to get the screw back on, and the SC technician driver was just the thing.
I (tried to) clean the locomotive, and tested it .It is really weird, and something's messed up in the reversing mechanism. I don't know if it does need a full loop of track, or not; but if you put it into reverse, the solenoid will fire; and the gears will turn about a tiny fraction of a revolution. Bump it, and put it into forward, and then it will go into reverse. My guess is something's gunked up from neglect, and needs even more cleaning and adjustment. Either that or my transformer's got a problem. Should have just bought a new set....
No photos of the layout and set until everything is fixed and set up.
-
Day 20 Update
Just used the Philips to tighten the screws on the porch railing. Noticed it was loose walking up, so the SC fixed it right away

Swiss Army Knights mission - Carve a notch into your staff for each time you use the Phillips or the Corksrew. At the end we'll see which got more collective use.
Corkscrew: //
Phillips: ///// -
@SirVicaLot said:
Day 20 UpdateJust used the Philips to tighten the screws on the porch railing. Noticed it was loose walking up, so the SC fixed it right away

Swiss Army Knights mission - Carve a notch into your staff for each time you use the Phillips or the Corksrew. At the end we'll see which got more collective use.
Corkscrew: //
Phillips: /////Wow! You've really used the corkscrew and the Phillips this month. This is an odd month because of the lockdown - so it's only between work and home for me... I feel silly not having added uses for those. I've opened a few jars easily without needing to break the vacuum with the corkscrew, and I've done absolutely no poking/prodding or marlinspiking with it. I'd have expected that the corkscrew would be what I use more. All the Phillips screws I've met with are already tight - except for the one I already fixed earlier this month... For some reason, it keeps working its way back out.
This evening I did several things with my Champion around dinner - I legitimately had to pry the lid off of a mason jar (slid the can opener underneath)... honestly open a package (scissors).... and it was totally necessary that I open a beer (opener). I figured, while I'm at it I might as well cut up my food (large blade) just for fun.
I already submitted my picture today, so I didn't take any more. :-\
-
I used the corkscrew for the exact two scenarios I knew I would use it. I found out during the Fieldmaster challenge that those are my main uses for it, and so far this challenge has proven it again: Untying knots and opening jars.
I hate loose screws with a passion, which is why I always have a Philips on me, even if it only is the tip of the can opener. I think the issue here is the climate. Due to a very low humidity, the wood is warping like crazy, loosening the screws in the process. At least i think that’s what it is :D
-
@Simon_Templar said:
Day 19We are allowed to go out with members of the same household for leisurely activities, so today we headed to the park on our bikes and had a small family picnic. Very nice, takes your mind off things.
Full disclosure: although I opened the picnic with the CT Lite, I also brought - in hefty violation of the challenge rules; sorry Comis, I hope you can forgive me just this once - my brand new Vic Cheese Knife. Ironically I ended up using just its main blade for everything as I did not want to swap and clean the blades all the time and the serrated blade did a terrific job on both the sausage and the cheese anyway. So I suspect one doesn't need a dedicated cheese blade after all. The Wine Master might therefore be the better picnic knife given that it sports a bottle opener in addition to an even larger serrated blade.
The cheese master has a bottle opener as well, on the fork. I did not even notice that when I ordered it, but saw it when I inspected it after it had arrived.
-
@comis said:
That should make an awesome gift for her. I have already get a pretty good Victorinox cheese knife in the past, and still on the fence about getting this one just for the fork. But I think I will wait for more review before making up my mind.Is it easy to find the fork variant in the US? I myself did not manage, at least not at an acceptable price. Luckily, there is a workaround: just get yourself a Fisherman and use its fish scaler as the fork complementing the cheese knife's blade. Hmmm, classy ;)
Edit: just checked, it seems to be more widely available now. Guess I will wait for prices to come down a bit and replace the Fisherman in the above workaround with a Cheese Master, haha.
-
@comis said:
That should make an awesome gift for her. I have already get a pretty good Victorinox cheese knife in the past, and still on the fence about getting this one just for the fork. But I think I will wait for more review before making up my mind.If for no other reason than it is a thoughtful gift from me, she’ll like it, because that is the kind of person she is.
I know she has been working herself really hard with everything going on. She normally just has a couple part-time employees but with the pandemic she has been doing it all herself. Plus, with a lot of the grocery stores running out of stuff, she has been doing a lot of extra to help out her customers - ordering hard to get items in bulk then repackaging for individual sale, coordinating with farmers to sell some of their eggs and crops in her shop, carrying more baked breads, etc.
@comis said:
Lovely 560Ti, and it's probably my favorite ZT. I too have been eyeing those really nice anodized version from USA made. 
The ZT560Ti is a beast, but I know most ZT knives are. Whitt (USAMadeBlade) does some nice anodizing and I couldn’t resist this one.@comis said:
Ahh...I see. With this setup, would you feel it might be slightly bulky in the cargo pocket? I could see the good thing about cargo pocket carry is you probably could carry this even with just wearing a cargo shorts.Cargo shorts are what I wear most of the time and it doesn’t feel that bulky in most pairs. The length of the folded CAT is a little long for some pockets, but overall bulk usually isn’t.
-
@SirVicaLot said:
The cheese master has a bottle opener as well, on the fork. I did not even notice that when I ordered it, but saw it when I inspected it after it had arrived.I was holding off because it lacked a bottle opener, so thanks SirVicaLot for pointing out that it has one on the fork - you can’t see that from the photos, but the video shows it...... I can see one joining the collection at some point now.....

-
@Simon_Templar said:
Is it easy to find the fork variant in the US? I myself did not manage, at least not at an acceptable price. Luckily, there is a workaround: just get yourself a Fisherman and use its fish scaler as the fork complementing the cheese knife's blade. Hmmm, classy ;)Edit: just checked, it seems to be more widely available now. Guess I will wait for prices to come down a bit and replace the Fisherman in the above workaround with a Cheese Master, haha.
I had been waiting for it to get more readily available, but was anle to find on DLT Trading.
-
@Rizio Il Ghiro said:
I was holding off because it lacked a bottle opener, so thanks SirVicaLot for pointing out that it has one on the fork - you can’t see that from the photos, but the video shows it...... I can see one joining the collection at some point now.....
Yep, it does. I was wondering the same because I didn’t see it in the photos but saw it listed under tools. So you can have wine or a craft beer with your cheese. Think fork can also come in handy for stabbing grapes on fruit and cheese trays.
-
Not forgetting pickled onions!
-
@Simon_Templar said:
Yes, that was the reason I got it too. And the cheese blade looks really cool indeed. But as I said, ultimately the serrated blade did the job just fine and it saved me the trouble of cleaning the complicated cheese blade. I am well aware that this is not how it was supposed to work out though
As for the Wine Master, it's just divine. It starts with the soft leather pouch, which fits the big knife like an expensive, delicate glove. Then you have the sizeable and sturdy Wenger blade, which in my opinion beats everything in Vic's arsenal hands down. It just feels great to cut any kind of foodstuff with it. And finally the piece de resistance, the sommelier's cork screw, which turns opening even the most basic bottle of table wine into a sensation of pure joy. Honest, the Wine Master may be an expensive piece of kit, but SAK's just don't get any better than this. In my opinion, every SAK fan should have one.
Edit: ... and I didn't even mention the gorgeous wooden scales, how could I ever forget that? And that cute little foil cutter. Ah, what a knife!
Many, many thanks for those thoughts and views. I'm almost literally drooling into my coffee at this point!
I feel a couple of investments in the wind...

-
@Sos24 said:
If for no other reason than it is a thoughtful gift from me, she’ll like it, because that is the kind of person she is.I know she has been working herself really hard with everything going on. She normally just has a couple part-time employees but with the pandemic she has been doing it all herself. Plus, with a lot of the grocery stores running out of stuff, she has been doing a lot of extra to help out her customers - ordering hard to get items in bulk then repackaging for individual sale, coordinating with farmers to sell some of their eggs and crops in her shop, carrying more baked breads, etc.
The ZT560Ti is a beast, but I know most ZT knives are. Whitt (USAMadeBlade) does some nice anodizing and I couldn’t resist this one.
Cargo shorts are what I wear most of the time and it doesn’t feel that bulky in most pairs. The length of the folded CAT is a little long for some pockets, but overall bulk usually isn’t.
Often time, it is this kind of story that will warm our hearts, and inspire us all to be a little kinder to everyone around us. Hope she too will stay healthy, and won't overwork herself too much.ZT560Ti weighs in around 5.4oz(153g) is a pretty big beast, but it is quite comparable to my Hinderer Skinny XM18 3.5" at 4.7oz(134g)(or other XM18 3.5" probably weighs in about 5+oz).
Personally, I think ZT really did a fantastic job on this, so much so that I might even argue it is a better iteration of XM18 3.5". The original XM18 is handsome looking knife, but personally, I think it is "over jimped", and the harsh jimping right under the flipper tab is truly a real nail puller if not careful. ZT solves all these jimping issues by streamlining the body, and the decision not to give the blade a half choil also gives back valuable cutting length to user. Not to mention the perfect balance right on first finger on the handle, making this beast actually feel lighter in use.
-
DAY 21
Just hanging out


-
Wow - that’s some collection there, Ivo!
Day 21
Used the scissors on the SC to cut up sandpaper sheets to fit my orbital sander - the battery version lets me do the garden furniture away from the house to cut down on the dust getting into the house, well that’s the theory,

-
Just took the once with a chain on

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
