SAK STACK 30 days challenge 2020 for Swisschamp, Cybertool & Toolchest
-
CRAFTSMANSAK, that paint dry yet? I can’t wait to see what those scales!!
JR -
@MadPlumbarian said:
Ok now this should be interesting! I have glow in the dark paint but I don’t think anything with those see through scales,,
JRWell... even when you fail you learn something. This does not work with ruby scales in the least. Even held a super bright flashlight right on it for a few minutes and it doesn't glow in the slightest. It works great on my emerald scale Ranger, though. Maybe I'll change this up later on to emerald. Still need to give the sapphire scales a try as well. Ah well. Knife cleaned up great and all the tools have great snap. Blades need sharpened though. Last owner used this to open packages - a lot. I had to keep wiping down the blades with alcohol to get all the sticky glue from packaging tape off of it. I have a feeling this will be my most carried knife along with my Trekker.
-
Day 24
Used the awl to open a box of pasta. used the blade to cut some fruit... and used the corkscrew to unseal a jar.


Corkscrew //
Phillips \ -
@CraftsmanSAK said:
Well... even when you fail you learn something. This does not work with ruby scales in the least. Even held a super bright flashlight right on it for a few minutes and it doesn't glow in the slightest. It works great on my emerald scale Ranger, though. Maybe I'll change this up later on to emerald. Still need to give the sapphire scales a try as well. Ah well. Knife cleaned up great and all the tools have great snap. Blades need sharpened though. Last owner used this to open packages - a lot. I had to keep wiping down the blades with alcohol to get all the sticky glue from packaging tape off of it. I have a feeling this will be my most carried knife along with my Trekker.Bummer, if I was to do this I would want to do it in the sapphire! The glow in the dark paint I have is some kind of blue if I’m not mistaken, I found a few parts to a sak, maybe I can make it into one, not sure, of course I could always just get a fieldmaster and then order the sapphire scales and snap them on, but that cost even more and I gotta deal with the Mrs, besides the farmerX is supposedly coming out next month, so it’s like

Sorry it didn’t work, the other one looks good!
JR -
Hey CraftsmanSAK, did you ever hear of www.uvpaqlite.com? They make glow sticks and other things that are supposedly one of the brightest and last the longest off very little light, they don’t sell paint but do sell in a powder form, you think the paint you have wasn't strong enough to push through the Ruby? Maybe if you were to scrape the paint off and then they say you can mix the glow on the dark powder with a clear epoxy and get it into those channels like you did with the paint it might push through the Ruby? Was a thought..
JR -
Day 24
Not much use today, just used the scissors on a loose thread. SC also came along walking the dogs:

-
-
Broiled lobster with cheese, love this dish.



The Champion with his biggest brothers

One heck of a nice collection
@Antti Lammi said:
Day 24 of 30SwissChamp helped me to open package what contained my new plus scales to one of my 91mm. Im thinking to replace my Super Tinker scales with these new ones.


Only Tools Matters
The sapphire is a nice color
@Antti Lammi said:
Nobody didnt hurt luckily, it was tho close call for my coworker.Only Tools Matters
Glad to hear no one got hurt. With equipment like that a small lapse in attention can get ugly
@CraftsmanSAK said:
Well... even when you fail you learn something. This does not work with ruby scales in the least. Even held a super bright flashlight right on it for a few minutes and it doesn't glow in the slightest. It works great on my emerald scale Ranger, though. Maybe I'll change this up later on to emerald. Still need to give the sapphire scales a try as well. Ah well. Knife cleaned up great and all the tools have great snap. Blades need sharpened though. Last owner used this to open packages - a lot. I had to keep wiping down the blades with alcohol to get all the sticky glue from packaging tape off of it. I have a feeling this will be my most carried knife along with my Trekker.Shame it didn’t work, but at least you really like the knife.
-
@Ivo said:
The only one I carry is a classic and a resque in my car.
The others I collect.
My favorites are the 111mm SAKs and the Hunter Pro family (so far I don't have a Hunter Pro yet).
I like 111mm for outdoor use, OH Trekker gonna be one of my all time favorite for that.@Antti Lammi said:
Nobody didnt hurt luckily, it was tho close call for my coworker.Only Tools Matters
That's what matter most.

Inspecting a new SD card for the Pi.
I remembered seeing you fixing the fan earlier, what was the project again?

@Max Stone said:
Day 24Some great pics and activities today from everyone.

Seeing we’re still under lockdown, pulled out some old travel slides my great aunt took in the 60s and 70s. Was quite a treat to fire up the old Kodak projector that’s probably not been used for 20 years.

Actually this may be a good time to transfer all those photo/slide into digital, eventually those media will fade and hopefully digital could help to preserve them. :D
-
-
@MadPlumbarian said:
Hey CraftsmanSAK, did you ever hear of www.uvpaqlite.com? They make glow sticks and other things that are supposedly one of the brightest and last the longest off very little light, they don’t sell paint but do sell in a powder form, you think the paint you have wasn't strong enough to push through the Ruby? Maybe if you were to scrape the paint off and then they say you can mix the glow on the dark powder with a clear epoxy and get it into those channels like you did with the paint it might push through the Ruby? Was a thought..
JRI'm thinking it was more a problem with the color/wavelength with the red vs. the green scales letting the right spectrum through to that paint (same type and color of paint in the Ranger as this CT). The uvpaqlite may work. I went ahead and just ordered some emerald scales for this for now. I know it wasn't some lesser quality batch of the paint, because I have a motion sensor/timer on the light overhead and I wasn't moving enough while I was painting the insides of these and when the light timed out they were lit up bright from that side. I sharpened the blades and got to playing around with it some tonight and I'll be getting some more CT's for sure. These are awesome!
-
@CraftsmanSAK said:
Well... even when you fail you learn something. This does not work with ruby scales in the least. Even held a super bright flashlight right on it for a few minutes and it doesn't glow in the slightest. It works great on my emerald scale Ranger, though. Maybe I'll change this up later on to emerald. Still need to give the sapphire scales a try as well. Ah well. Knife cleaned up great and all the tools have great snap. Blades need sharpened though. Last owner used this to open packages - a lot. I had to keep wiping down the blades with alcohol to get all the sticky glue from packaging tape off of it. I have a feeling this will be my most carried knife along with my Trekker.Maybe it's the red translucent blocking the UV light, but it's worth a try.

@ElevenBlade said:
Day 24Used the awl to open a box of pasta. used the blade to cut some fruit... and used the corkscrew to unseal a jar.


Corkscrew //
Phillips \Good uses!
@MadPlumbarian said:
Hey CraftsmanSAK, did you ever hear of www.uvpaqlite.com? They make glow sticks and other things that are supposedly one of the brightest and last the longest off very little light, they don’t sell paint but do sell in a powder form, you think the paint you have wasn't strong enough to push through the Ruby? Maybe if you were to scrape the paint off and then they say you can mix the glow on the dark powder with a clear epoxy and get it into those channels like you did with the paint it might push through the Ruby? Was a thought..
JRMP, if you are in market looking for bright GID powder, I could wholeheartedly recommend the glowinc powder. I think they are one of the larger online retailer for that, and am sure with the volume they dealt with, their stock should be pretty fresh and longer lasting. Based on my own use, most other powders I see in craft store or big box stores are jokes when compared to their powder.
@Sos24 said:
This is 10 inch bracelet is too small for many of my projects without jerry-rigging like I did. I finally broke down and order a new jig that I am really looking forward to.
That should be fun! -
Day 24
The Champion cut open a treat for Fisher

-
@CraftsmanSAK said:
I'm thinking it was more a problem with the color/wavelength with the red vs. the green scales letting the right spectrum through to that paint (same type and color of paint in the Ranger as this CT). The uvpaqlite may work. I went ahead and just ordered some emerald scales for this for now. I know it wasn't some lesser quality batch of the paint, because I have a motion sensor/timer on the light overhead and I wasn't moving enough while I was painting the insides of these and when the light timed out they were lit up bright from that side. I sharpened the blades and got to playing around with it some tonight and I'll be getting some more CT's for sure. These are awesome!If you are planning to make more GID scales, IIRC, I might have mentioned my post about how to turn a silvertech into a translucent scale. And for GID purpose, it probably is one of the best bet without 3d printing one.
DIY Glow in the dark and Semi-transparent 91mm scales & youtube tutorial

-
@comis said:
Maybe it's the red translucent blocking the UV light, but it's worth a try.
:D we both posted this at the same time. That probably is the issue. I buggered up the shield side scale of my sapphire SC last week, so maybe I'll just order another side for that and see how well it does letting light through to it on the old one I pull off.
-
Day 24
I used the inline Phillips driver to tighten a loose pot handle.
-
That blue is awesome! My only thing is during the day it’s not going to be blue but white, and I’m guessing that the green is brighter? and if a survival knife I’d rather it be brighter,, now that green went worked with the other one so do you think mixing a blue glow in the dark epoxy on a sapphire will work?
JR
-
@Sos24 said:
Day 24
The Champion cut open a treat for Fisher

For a second I thought I was seeing a instant shish kebab
:D@CraftsmanSAK said:
Beautiful! I bookmarked it this time.
@Alan K. said:
Day 24
I used the inline Phillips driver to tighten a loose pot handle.
Good use!
@MadPlumbarian said:
That blue is awesome! My only thing is during the day it’s not going to be blue but white, and I’m guessing that the green is brighter? and if a survival knife I’d rather it be brighter,, now that green went worked with the other one so do you think mixing a blue glow in the dark epoxy on a sapphire will work?
JRIf we are only using the brightest GID powder, then the daytime color could be white-ish. But if we are willing to compromise a little by using coated powder or GID powder mixed with other colors, we might be able to strike a good balance between daytime effect vs night glowing performance. Here is a job I did with GITD, tritium and glitter for reference:


Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

