SAK STACK 30 days challenge 2020 for Swisschamp, Cybertool & Toolchest
-
Day 24
I used the inline Phillips driver to tighten a loose pot handle.
-
That blue is awesome! My only thing is during the day it’s not going to be blue but white, and I’m guessing that the green is brighter? and if a survival knife I’d rather it be brighter,, now that green went worked with the other one so do you think mixing a blue glow in the dark epoxy on a sapphire will work?
JR
-
@Sos24 said:
Day 24
The Champion cut open a treat for Fisher

For a second I thought I was seeing a instant shish kebab
:D@CraftsmanSAK said:
Beautiful! I bookmarked it this time.
@Alan K. said:
Day 24
I used the inline Phillips driver to tighten a loose pot handle.
Good use!
@MadPlumbarian said:
That blue is awesome! My only thing is during the day it’s not going to be blue but white, and I’m guessing that the green is brighter? and if a survival knife I’d rather it be brighter,, now that green went worked with the other one so do you think mixing a blue glow in the dark epoxy on a sapphire will work?
JRIf we are only using the brightest GID powder, then the daytime color could be white-ish. But if we are willing to compromise a little by using coated powder or GID powder mixed with other colors, we might be able to strike a good balance between daytime effect vs night glowing performance. Here is a job I did with GITD, tritium and glitter for reference:


-
Comis, of all your GID mods I like this one the best!

-
Day 24
Some more Lego for the Kids (yeah, right...)

-
@comis said:
If we are only using the brightest GID powder, then the daytime color could be white-ish. But if we are willing to compromise a little by using coated powder or GID powder mixed with other colors, we might be able to strike a good balance between daytime effect vs night glowing performance. Here is a job I did with GITD, tritium and glitter for referenceLooks great, Comis! Excellent job

-
Day 25
Used the SC to help adjust a phillips for moving shelf in bedroom, it looks awkward since photo is taken upside down. I think for this kind of job, the shorter inline phillips is probably easier to control than the longer mini screwdriver.

Used during the challenge:
corkscrew: /
phillips: / / / -
@Rizio Il Ghiro said:
Comis, of all your GID mods I like this one the best!

I like this one the most too!

@Simon_Templar said:
Day 24Some more Lego for the Kids (yeah, right...)
Did the kids ever fight you for the lego? :D
@Simon_Templar said:
Looks great, Comis! Excellent job
Thank you!

-
Day 25
I am aware it's a bit early for this journal entry for day 25, but after two weeks with the XLT and more than a week with the CT Lite, I wanted to share my thoughts on the Cybertool line with you and ask for your opinion on the subject.
Admittedly, I was confined to my home most of the time, so one might not call this a real EDC experience, but I for one have come full circle and arrived again at the opinion I had before this challenge started: the CT34 is, at least for me, the best of the Cybertools for urban EDC, and one of the best SAK for urban EDC overall.
The XLT is a great SAK on account of its having everything and still being pocketable and useable, if only just. I love it but couldn't help noticing I wasn't needing the vast majority of its tools, and I don't think this would have been different if I hadn't been in lockdown.
Consequently, I downgraded to the CT Lite, and while its toolset felt much closer to my actual demand, there is just no getting around the fact that in these days of smartphone LEDs, there's no real need for a SAK light anymore. Admittedly, the CT Lite makes particular clever use of the LED as a companion to the bit holder, but since I am not often driving screws in dark, confined spaces, I still think the extra layer of the CT Lite over the CT 34 serves mostly for adding the magnifier to the mix. Now, I really like playing around with the magnifier, especially when sitting at my desk bored, but it's still just (very) nice to have for me. It's difficult to imagine a situation in my everyday life where having it could make a real difference over not having it.
Once you have come to that conclusion, it's difficult not to notice just how much bigger the CT Lite is compared to the CT 34. I know we are talking only one layer here, but it's a sizeable layer in addition to the already chunky CT layer. Simpy put, its the difference between sub-SC and SC territory. Maybe it's something psychological, but to me the SC marks the border between a "no compromise" all-in-one SAK and a EDC. So this might be why after ten days with the CT Lite I feel, at least for now, that it is just this one layer too big to qualify as my EDC.
So I am now back to the CT 34, which incidentally I already carried as EDC for a while before this challenge. In order to
adequately celebrate this and not just return to the stacked SAK I already carried before this challenge started, I decided for the first time in my short career as a SAK amassor to switch the scales on one of my Cybertools (from translucent to black, the only color in which I possess plus scales). Behold!Edit: Comis, before this challenge started I told you you shouldn't have allowed the CT34 and CT29 in the stacked challenge because carrying them would almost be like cheating, and now look what you have done!


-
DAY 25
3 champions among 111mm SAKs


-
@Simon_Templar said:
Day 25I am aware it's a bit early for this journal entry for day 25, but after two weeks with the XLT and more than a week with the CT Lite, I wanted to share my thoughts on the Cybertool line with you and ask for your opinion on the subject.
Admittedly, I was confined to my home most of the time, so one might not call this a real EDC experience, but I for one have come full circle and arrived again at the opinion I had before this challenge started: the CT34 is, at least for me, the best of the Cybertools for urban EDC, and one of the best SAK for urban EDC overall.
The XLT is a great SAK on account of its having everything and still being pocketable and useable, if only just. I love it but couldn't help noticing I wasn't needing the vast majority of its tools, and I don't think this would have been different if I hadn't been in lockdown.
Consequently, I downgraded to the CT Lite, and while its toolset felt much closer to my actual demand, there is just no getting around the fact that in these days of smartphone LEDs, there's no real need for a SAK light anymore. Admittedly, the CT Lite makes particular clever use of the LED as a companion to the bit holder, but since I am not often driving screws in dark, confined spaces, I still think the extra layer of the CT Lite over the CT 34 serves mostly for adding the magnifier to the mix. Now, I really like playing around with the magnifier, especially when sitting at my desk bored, but it's still just (very) nice to have for me. It's difficult to imagine a situation in my everyday life where having it could make a real difference over not having it.
Once you have come to that conclusion, it's difficult not to notice just how much bigger the CT Lite is compared to the CT 34. I know we are talking only one layer here, but it's a sizeable layer in addition to the already chunky CT layer. Simpy put, its the difference between sub-SC and SC territory. Maybe it's something psychological, but to me the SC marks the border between a "no compromise" all-in-one SAK and a EDC. So this might be why after ten days with the CT Lite I feel, at least for now, that it is just this one layer too big to qualify as my EDC.
So I am now back to the CT 34, which incidentally I already carried as EDC for a while before this challenge. In order to
adequately celebrate this and not just return to the stacked SAK I already carried before this challenge started, I decided for the first time in my short career as a SAK amassor to switch the scales on one of my Cybertools (from translucent to black, the only color in which I possess plus scales). Behold!Edit: Comis, before this challenge started I told you you shouldn't have allowed the CT34 and CT29 in the stacked challenge because carrying them would almost be like cheating, and now look what you have done!
I just gave you the pen, but you are the one to draw the full circle.
:D@ulzhan said:
Connected that raspi with the TV. For youtube and also websurfing.
Does it work better than something like chromecast?3 champions among 111mm SAKs

That's a nice display!

-
Thanks comis

-
Day 25
And down to the last two. XLT taking over pocket duty from the CT-41. I was originally going to put it in a sheath, but it carries OK in the pocket on a short clip.

Already put to use fixing the weedeater and dicky plug. No garden services so eventually got around to doing some of the work myself.

Love the pruner and electricians blades, but they really feel awkward to use with the width of this SAK. ???




-
@comis: With mouse and keyboard it's almost like a normal PC. My notebook is almost 12 years old and the Pi is faster than the old trash.
That stayglow looks very cool
@Simon_Templar: Seems the CT 34 is your tool of choice. Have also two CT 34 here. Sometimes they also get carried.
-
@ulzhan said:
@Simon_Templar: Seems the CT 34 is your tool of choice. Have also two CT 34 here. Sometimes they also get carried.Yes, who would have thought? For a long time the CT 34 seemed way too expensive to me when compared to the Explorer and the Deluxe Tinker, its closest competitors in my opinion. This I why I hesitated and got the CT Lite and CT41 first.
I still think all the bit driver SAKs are rather overpriced, but what can you do, as an overall package the CT34 and CT Lite are quite unique (more so than the CT41 in my opinion). That said, I think I might prefer an Explorer Plus with extra pliers as EDC. I estimate it would be reasonably cheap at around 40 Euros and a precious few mm thinner than the CT34. Too bad Vic doesn't make them and I am not the modding type.
-
@Max Stone said:
Day 25And down to the last two. XLT taking over pocket duty from the CT-41. I was originally going to put it in a sheath, but it carries OK in the pocket on a short clip.

Already put to use fixing the weedeater and dicky plug. No garden services so eventually got around to doing some of the work myself.

Love the pruner and electricians blades, but they really feel awkward to use with the width of this SAK. ???
After using XLT and XAVT in this challenge, I have a feeling those are more for collecting purpose while Swisschamp is probably the most comprehensive heavy weight SAK I wouldn't mind to carry.
@ulzhan said:
@comis: With mouse and keyboard it's almost like a normal PC. My notebook is almost 12 years old and the Pi is faster than the old trash.That stayglow looks very cool
@Simon_Templar: Seems the CT 34 is your tool of choice. Have also two CT 34 here. Sometimes they also get carried.

@Simon_Templar said:
Yes, who would have thought? For a long time the CT 34 seemed way too expensive to me when compared to the Explorer and the Deluxe Tinker, its closest competitors in my opinion. This I why I hesitated and got the CT Lite and CT41 first.I still think all the bit driver SAKs are rather overpriced, but what can you do, as an overall package the CT34 and CT Lite are quite unique (more so than the CT41 in my opinion). That said, I think I might prefer an Explorer Plus with extra pliers as EDC. I estimate it would be reasonably cheap at around 40 Euros and a precious few mm thinner than the CT34. Too bad Vic doesn't make them and I am not the modding type.
If you have a dremel, a flat head hammer and the right pins, modding is really relatively easy and fun for the 91mm.
:D -
@comis said:
If we are only using the brightest GID powder, then the daytime color could be white-ish. But if we are willing to compromise a little by using coated powder or GID powder mixed with other colors, we might be able to strike a good balance between daytime effect vs night glowing performance. Here is a job I did with GITD, tritium and glitter for reference:

Oh sweet! Now if I remember in one of your videos you painted the lines a diff color? So what if you did like what you showed there and did like a black line to give a little more spunk, no? Or would it not really show through?
JR
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
