SAK STACK 30 days challenge 2020 for Swisschamp, Cybertool & Toolchest
-
DAY 25
3 champions among 111mm SAKs


-
@Simon_Templar said:
Day 25I am aware it's a bit early for this journal entry for day 25, but after two weeks with the XLT and more than a week with the CT Lite, I wanted to share my thoughts on the Cybertool line with you and ask for your opinion on the subject.
Admittedly, I was confined to my home most of the time, so one might not call this a real EDC experience, but I for one have come full circle and arrived again at the opinion I had before this challenge started: the CT34 is, at least for me, the best of the Cybertools for urban EDC, and one of the best SAK for urban EDC overall.
The XLT is a great SAK on account of its having everything and still being pocketable and useable, if only just. I love it but couldn't help noticing I wasn't needing the vast majority of its tools, and I don't think this would have been different if I hadn't been in lockdown.
Consequently, I downgraded to the CT Lite, and while its toolset felt much closer to my actual demand, there is just no getting around the fact that in these days of smartphone LEDs, there's no real need for a SAK light anymore. Admittedly, the CT Lite makes particular clever use of the LED as a companion to the bit holder, but since I am not often driving screws in dark, confined spaces, I still think the extra layer of the CT Lite over the CT 34 serves mostly for adding the magnifier to the mix. Now, I really like playing around with the magnifier, especially when sitting at my desk bored, but it's still just (very) nice to have for me. It's difficult to imagine a situation in my everyday life where having it could make a real difference over not having it.
Once you have come to that conclusion, it's difficult not to notice just how much bigger the CT Lite is compared to the CT 34. I know we are talking only one layer here, but it's a sizeable layer in addition to the already chunky CT layer. Simpy put, its the difference between sub-SC and SC territory. Maybe it's something psychological, but to me the SC marks the border between a "no compromise" all-in-one SAK and a EDC. So this might be why after ten days with the CT Lite I feel, at least for now, that it is just this one layer too big to qualify as my EDC.
So I am now back to the CT 34, which incidentally I already carried as EDC for a while before this challenge. In order to
adequately celebrate this and not just return to the stacked SAK I already carried before this challenge started, I decided for the first time in my short career as a SAK amassor to switch the scales on one of my Cybertools (from translucent to black, the only color in which I possess plus scales). Behold!Edit: Comis, before this challenge started I told you you shouldn't have allowed the CT34 and CT29 in the stacked challenge because carrying them would almost be like cheating, and now look what you have done!
I just gave you the pen, but you are the one to draw the full circle.
:D@ulzhan said:
Connected that raspi with the TV. For youtube and also websurfing.
Does it work better than something like chromecast?3 champions among 111mm SAKs

That's a nice display!

-
Thanks comis

-
Day 25
And down to the last two. XLT taking over pocket duty from the CT-41. I was originally going to put it in a sheath, but it carries OK in the pocket on a short clip.

Already put to use fixing the weedeater and dicky plug. No garden services so eventually got around to doing some of the work myself.

Love the pruner and electricians blades, but they really feel awkward to use with the width of this SAK. ???




-
@comis: With mouse and keyboard it's almost like a normal PC. My notebook is almost 12 years old and the Pi is faster than the old trash.
That stayglow looks very cool
@Simon_Templar: Seems the CT 34 is your tool of choice. Have also two CT 34 here. Sometimes they also get carried.
-
@ulzhan said:
@Simon_Templar: Seems the CT 34 is your tool of choice. Have also two CT 34 here. Sometimes they also get carried.Yes, who would have thought? For a long time the CT 34 seemed way too expensive to me when compared to the Explorer and the Deluxe Tinker, its closest competitors in my opinion. This I why I hesitated and got the CT Lite and CT41 first.
I still think all the bit driver SAKs are rather overpriced, but what can you do, as an overall package the CT34 and CT Lite are quite unique (more so than the CT41 in my opinion). That said, I think I might prefer an Explorer Plus with extra pliers as EDC. I estimate it would be reasonably cheap at around 40 Euros and a precious few mm thinner than the CT34. Too bad Vic doesn't make them and I am not the modding type.
-
@Max Stone said:
Day 25And down to the last two. XLT taking over pocket duty from the CT-41. I was originally going to put it in a sheath, but it carries OK in the pocket on a short clip.

Already put to use fixing the weedeater and dicky plug. No garden services so eventually got around to doing some of the work myself.

Love the pruner and electricians blades, but they really feel awkward to use with the width of this SAK. ???
After using XLT and XAVT in this challenge, I have a feeling those are more for collecting purpose while Swisschamp is probably the most comprehensive heavy weight SAK I wouldn't mind to carry.
@ulzhan said:
@comis: With mouse and keyboard it's almost like a normal PC. My notebook is almost 12 years old and the Pi is faster than the old trash.That stayglow looks very cool
@Simon_Templar: Seems the CT 34 is your tool of choice. Have also two CT 34 here. Sometimes they also get carried.

@Simon_Templar said:
Yes, who would have thought? For a long time the CT 34 seemed way too expensive to me when compared to the Explorer and the Deluxe Tinker, its closest competitors in my opinion. This I why I hesitated and got the CT Lite and CT41 first.I still think all the bit driver SAKs are rather overpriced, but what can you do, as an overall package the CT34 and CT Lite are quite unique (more so than the CT41 in my opinion). That said, I think I might prefer an Explorer Plus with extra pliers as EDC. I estimate it would be reasonably cheap at around 40 Euros and a precious few mm thinner than the CT34. Too bad Vic doesn't make them and I am not the modding type.
If you have a dremel, a flat head hammer and the right pins, modding is really relatively easy and fun for the 91mm.
:D -
@comis said:
If we are only using the brightest GID powder, then the daytime color could be white-ish. But if we are willing to compromise a little by using coated powder or GID powder mixed with other colors, we might be able to strike a good balance between daytime effect vs night glowing performance. Here is a job I did with GITD, tritium and glitter for reference:

Oh sweet! Now if I remember in one of your videos you painted the lines a diff color? So what if you did like what you showed there and did like a black line to give a little more spunk, no? Or would it not really show through?
JR -
More lovely pics and uses!
Day 25
Used the Sc’c awl to slice open the tape sealing this box from Switzerland containing some lovely green lanyards - yay!!

-
Pic didn’t attach


-
@MadPlumbarian said:
Oh sweet! Now if I remember in one of your videos you painted the lines a diff color? So what if you did like what you showed there and did like a black line to give a little more spunk, no? Or would it not really show through?
JRI think you might have confused me with Grant, he did one video long time ago, where he just sand down the border lines and painted them. Here is that video:
https://www.youtube.com/watch?v=uADQFmUmpKII try to photoshop what you mean by painting the border black, it's really rough approximation, but personally, I would rather keep it transparent and bring the focus to the custom colors.

-
Day 25
Presenters on/off switch didn't work anymore. Used the bit driver to remove two screws on the inside and the bottle opener to pry it open. Some small plastics broke but it's now usable again.

-
@comis said:
I think you might have confused me with Grant, he did one video long time ago, where he just sand down the border lines and painted them. Here is that video:
https://www.youtube.com/watch?v=uADQFmUmpKII try to photoshop what you mean by painting the border black, it's really rough approximation, but personally, I would rather keep it transparent and bring the focus to the custom colors.

Yeah! My bad, good job on the the photoshop, for a sec I thought you did it, lol, but I like it!
JR -
@comis said:
If you have a dremel, a flat head hammer and the right pins, modding is really relatively easy and fun for the 91mm.
:DI only have an oscillating multi-tool, and no pins nor any clue where I could get any. And while one part of me finds the idea of modding interesting, the other part (the lazy one, which also constantly reminds me I lack the ambition to find myself any pins) thinks it would amount to challenging the Elsener Gods to just start creating SAKs after my own imagine (read: design).
-
DAY 25
While on the trails I had one person who was kind enough to let me know my tail light was flickering through the bumpy stuff. Sure enough, after pulling the bulb out it needed a light sanding on its two little contact points and I put a couple small dabs of dielectric grease on the them as well. Lots of gremlins like to show up after they sit over winter. Need to do this with all the bulbs now to be sure.
-
Day 25
Making progress on the camera strap

-
Day 25 of 30
Sharpened pencil for my daughter, it was faster sharpen with SC rather than trying to find sharpener

Only Tools Matters
-
Day 25
Finally remembered to take an action shot today - a slice of lime for the fish I made for dinner.

Corkscrew //
Phillips \
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login