SAK STACK 30 days challenge 2020 for Swisschamp, Cybertool & Toolchest
-
@comis said:
I think you might have confused me with Grant, he did one video long time ago, where he just sand down the border lines and painted them. Here is that video:
https://www.youtube.com/watch?v=uADQFmUmpKII try to photoshop what you mean by painting the border black, it's really rough approximation, but personally, I would rather keep it transparent and bring the focus to the custom colors.

Yeah! My bad, good job on the the photoshop, for a sec I thought you did it, lol, but I like it!
JR -
@comis said:
If you have a dremel, a flat head hammer and the right pins, modding is really relatively easy and fun for the 91mm.
:DI only have an oscillating multi-tool, and no pins nor any clue where I could get any. And while one part of me finds the idea of modding interesting, the other part (the lazy one, which also constantly reminds me I lack the ambition to find myself any pins) thinks it would amount to challenging the Elsener Gods to just start creating SAKs after my own imagine (read: design).
-
DAY 25
While on the trails I had one person who was kind enough to let me know my tail light was flickering through the bumpy stuff. Sure enough, after pulling the bulb out it needed a light sanding on its two little contact points and I put a couple small dabs of dielectric grease on the them as well. Lots of gremlins like to show up after they sit over winter. Need to do this with all the bulbs now to be sure.
-
Day 25
Making progress on the camera strap

-
Day 25 of 30
Sharpened pencil for my daughter, it was faster sharpen with SC rather than trying to find sharpener

Only Tools Matters
-
Day 25
Finally remembered to take an action shot today - a slice of lime for the fish I made for dinner.

Corkscrew //
Phillips \
-
Presenters on/off switch didn't work anymore. Used the bit driver to remove two screws on the inside and the bottle opener to pry it open. Some small plastics broke but it's now usable again.
Good fix
@SirVicaLot said:
Day 25Making progress on the camera strap

Nice work
-
@Simon_Templar said:
Day 25I am aware it's a bit early for this journal entry for day 25, but after two weeks with the XLT and more than a week with the CT Lite, I wanted to share my thoughts on the Cybertool line with you and ask for your opinion on the subject.
Admittedly, I was confined to my home most of the time, so one might not call this a real EDC experience, but I for one have come full circle and arrived again at the opinion I had before this challenge started: the CT34 is, at least for me, the best of the Cybertools for urban EDC, and one of the best SAK for urban EDC overall.
The XLT is a great SAK on account of its having everything and still being pocketable and useable, if only just. I love it but couldn't help noticing I wasn't needing the vast majority of its tools, and I don't think this would have been different if I hadn't been in lockdown.
Consequently, I downgraded to the CT Lite, and while its toolset felt much closer to my actual demand, there is just no getting around the fact that in these days of smartphone LEDs, there's no real need for a SAK light anymore. Admittedly, the CT Lite makes particular clever use of the LED as a companion to the bit holder, but since I am not often driving screws in dark, confined spaces, I still think the extra layer of the CT Lite over the CT 34 serves mostly for adding the magnifier to the mix. Now, I really like playing around with the magnifier, especially when sitting at my desk bored, but it's still just (very) nice to have for me. It's difficult to imagine a situation in my everyday life where having it could make a real difference over not having it.
Once you have come to that conclusion, it's difficult not to notice just how much bigger the CT Lite is compared to the CT 34. I know we are talking only one layer here, but it's a sizeable layer in addition to the already chunky CT layer. Simpy put, its the difference between sub-SC and SC territory. Maybe it's something psychological, but to me the SC marks the border between a "no compromise" all-in-one SAK and a EDC. So this might be why after ten days with the CT Lite I feel, at least for now, that it is just this one layer too big to qualify as my EDC.
So I am now back to the CT 34, which incidentally I already carried as EDC for a while before this challenge. In order to
adequately celebrate this and not just return to the stacked SAK I already carried before this challenge started, I decided for the first time in my short career as a SAK amassor to switch the scales on one of my Cybertools (from translucent to black, the only color in which I possess plus scales). Behold!Edit: Comis, before this challenge started I told you you shouldn't have allowed the CT34 and CT29 in the stacked challenge because carrying them would almost be like cheating, and now look what you have done!
Great review
-
@comis said:
If we are only using the brightest GID powder, then the daytime color could be white-ish. But if we are willing to compromise a little by using coated powder or GID powder mixed with other colors, we might be able to strike a good balance between daytime effect vs night glowing performance. Here is a job I did with GITD, tritium and glitter for reference:

Those pictures have me excited for the end of this challenge, so the Mountain Yeoman can get some pocket time.
-
Day 25
The Champion helped with lawn duty - fish scaler cleaned off some of grass in the guard and vents, and the phillips tightened the guard which was coming loose

-
-
-
Presenters on/off switch didn't work anymore. Used the bit driver to remove two screws on the inside and the bottle opener to pry it open. Some small plastics broke but it's now usable again.
This fixing kinda remind my wife's uncle who was an old-school engineer that insisted he must know how everything function in his house. The first time he saw a laptop from my wife's work, he asked my wife whether she has taken it apart and knew how it worked inside. My wife said no, and he commented why she would get a piece of equipment not knowing how to maintain it. He has long passed, but I often think how the world post-internet would have been so curious to him. :D
@Simon_Templar said:
I only have an oscillating multi-tool, and no pins nor any clue where I could get any. And while one part of me finds the idea of modding interesting, the other part (the lazy one, which also constantly reminds me I lack the ambition to find myself any pins) thinks it would amount to challenging the Elsener Gods to just start creating SAKs after my own imagine (read: design).Who knows, maybe some that modding bug will bite you and give you the super will power to do one...

@CraftsmanSAK said:
DAY 25While on the trails I had one person who was kind enough to let me know my tail light was flickering through the bumpy stuff. Sure enough, after pulling the bulb out it needed a light sanding on its two little contact points and I put a couple small dabs of dielectric grease on the them as well. Lots of gremlins like to show up after they sit over winter. Need to do this with all the bulbs now to be sure.
I always thought what if they got on a plane and experience time difference? Do they stick to their old time frame or adjust to local time?


What if he was taking a long haul flight and turned while watching movie?@SirVicaLot said:
Day 25Making progress on the camera strap

Looks really neat, it's coming together nicely.

-
@Antti Lammi said:
Day 25 of 30Sharpened pencil for my daughter, it was faster sharpen with SC rather than trying to find sharpener

Only Tools Matters
Good use! I remembered everyone has a small simple folding knife for pencil sharpening when I was at school, and those days were long gone since then. Nowadays, I even read boy scout has regulation when and where are they allowed to carry their knives. Time certainly has changed.
@ElevenBlade said:
Day 25Finally remembered to take an action shot today - a slice of lime for the fish I made for dinner.

Corkscrew //
Phillips \
Lime on fish, nice touch!@Sos24 said:
Those pictures have me excited for the end of this challenge, so the Mountain Yeoman can get some pocket time.
:D@cody6268 said:
Day 25. While the back scale chipped right before the challenge, the front scale on my SC broke sometime before today.I agree with Sos24, maybe it is telling you something...

-
Slightly late, but here's my contribution to day 25.
Day 25
I opened a resealable bag of tobacco with the scissors. -
Day 26
XLT helped fix my slipper that had come lose at the back seam. Awl was perfect for the job.


-
@Alan K. said:
Slightly late, but here's my contribution to day 25.Day 25
I opened a resealable bag of tobacco with the scissors.Nice use!

@Max Stone said:
Day 26XLT helped fix my slipper that had come lose at the back seam. Awl was perfect for the job.

I have used the awl for various stuff, but I don't think I'd ever try using it on leather, where it supposed to be used. I always wonder wouldn't it make too big a hole and make the stitching looks funny?

-
Day 26
A little TLC for my Swisschamp today. As a knife enthusiast, I am used to seeing people talking silly about Vic steel, and everyone nowadays are raving about steel that has crazy edge retention. But for the balance between value, performance and maintenance, I would argue it's hard to find a better steel than this. In literally less than a minute, the edge is back to hair popping sharpness.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

