SAK STACK 30 days challenge 2020 for Swisschamp, Cybertool & Toolchest
-
Sos24 - can’t wait to see the finished product from your new jig - blue and green, my favourite colour combo!
Day 28
I was up first thing doing a spot of ratting, but the rear flip-up dust cover on my new scope kept falling off, a sure fire recipe for getting lost at some point! So I used the scissors on the SC to slice up slivers of insulating tape to put inside the cover where it slips on the rear ocular - 4 layers did the trick, nice and snug now and the flip-up cover works as it should - also has the handy by effect of keeping the scope focused nicely on the reticle as I can’t move the ring accidentally anymore as it’s covered up inside the flip-up cover mounting ring!


-
@Sos24 said:
I have four projects either in progress or planned - harness, two leashes and a car seat belt attachment. The jig has already been in use.

Wow, plunging right into it!

@Sos24 said:
Day 28
The SC helped with some cutting of paracord, opening a beer and opening a couple hot sauces for a late night (early morning) snack

Hot sauce is great, it could literally save any bland meal or snack into something mouth watering.

-
DAY 28
CT29 and some nice 111mm's


-
@Rizio Il Ghiro said:
Sos24 - can’t wait to see the finished product from your new jig - blue and green, my favourite colour combo!Day 28
I was up first thing doing a spot of ratting, but the rear flip-up dust cover on my new scope kept falling off, a sure fire recipe for getting lost at some point! So I used the scissors on the SC to slice up slivers of insulating tape to put inside the cover where it slips on the rear ocular - 4 layers did the trick, nice and snug now and the flip-up cover works as it should - also has the handy by effect of keeping the scope focused nicely on the reticle as I can’t move the ring accidentally anymore as it’s covered up inside the flip-up cover mounting ring!
Nice use, I so wanted to see this rifle in action.

CT29 and some nice 111mm's

Another day of nice collection. :D

-
Day 28
No use, just posing my Wenger S54 next to a mayflower bottle of surup Mrs is making.

-
@comis said:
How does this work? Wouldn't that bend your can opener?
The screw was basically torn inside the wood. The part with the torsions was stuck, while the other part rotated freely, but did not come out. I used the “blade” part of the can opener to get under the screw head and apply some upward pressure, while turning it. Once I got some more space I used the can opener as a hook, to keep the upward pressure until the screw is out.
Worked every single time so far
After that it is easier to drill through the stuck part of the screw.
-
Interesting idea - must give that a try next time I have a broken screw to remove, SirVicaLot,

-
@SirVicaLot said:
The screw was basically torn inside the wood. The part with the torsions was stuck, while the other part rotated freely, but did not come out. I used the “blade” part of the can opener to get under the screw head and apply some upward pressure, while turning it. Once I got some more space I used the can opener as a hook, to keep the upward pressure until the screw is out.
Worked every single time so far
After that it is easier to drill through the stuck part of the screw.
Thanks! I too would bear that in mind, may come in handy some day.

-
Day 28
Battery change, awl to the rescue (again)

-
Day 28 of 30
Blade was used today to tear plastic, my utility blade was out of blades and last blade snapped while was cutting it. Luckily i had SwissChamp with me so it handeled job easily.

Only Tools Matters
-
Day 28
Last model for the last 3 days...What I had to say when I reviewed it for my 30 day challenge last year:
What has 15 layers, weighs 12.6oz (356g) and is 2.5in (65mm) wide? As it’s Day 30, you’ve probably guessed...the Swiss Champ XAVT.
This is the largest 91mm SAK in the current range, adding 4 layers to the already large XLT, and comfortably doubling the width of the Swiss Champ. It’s like you glued two Swiss Champs together!
Surely this is too large to use and carry? But people do. It has an oversized leather case for belt carry, and while you need to stretch to get your hand around it, the tools are usable. It’s just a little cumbersome and heavy in the hand. Victorinox market the XAVT as geared for collectors, and I guess they’re right.
So what’s added to make up the extra layers? As most people are familiar with the Swiss Champ, I’ll discuss what’s extra compared to this model.
First there’s the digital scale with LCD display. Then paired to the inline Phillips is a universal wrench, the design borrowed from Wenger. It has two bit drivers, with an extra 4 bits not found on the CyberTools. The LED is the new transparent housing version with a much brighter and usable LED. Then there’s the very nice large serrated blade. This is from ‘new old stock’ as it has the older crossbow logo on the tang. Paired to this blade is an inline awl, like those found on the Alox Pioneers. (This is my favourite layer on the XAVT).
There’s the short pruner, electrician’s blade and pharmaceutical spatula as found on the XLT. And just for good measure, there’s a combo tool and a watch case opener.
The back has two hooks, one with the nail file, and two 2.5mm drivers. Along with what you’d expect, such as corkscrew (plus mini screwdriver), awl and chisel. The bottom scale houses the tweezers, toothpick, pen and pin...the same scales as found on the Traveler and other digital SAKs.
The total count of functions varies depending on where you look, between 80 and 83. Compare this to 33 for the Swiss Champ and 50 for the CyberTool L and you get and idea of just how impressive this monster really is.
But there’s some tool duplication, so a re-count of actual functions, with less creative license, tops out at 70. Still very impressive!
- Toothpick
- Tweezers
- Pressurized Ballpoint Pen
- Stainless Steel Pin
- Thermometer (C/F)
- Digital Watch (12h/24h)
- Alarm
- Countdown Timer
- Stopwatch
- Altimeter (m/ft)
- Barometric trend graph
- Reamer/Punch/Sewing Awl
- Can Opener (standard & combo tool)
- Screwdriver 3mm (on Can Opener)
- Bottle Opener (standard & combo tool)
- Wire Stripper (x2)
- Screwdriver 6mm (on Bottle Opener)
- Key Ring
- Universal Wrench M3/M4/M5*
- Inline Phillips Screwdriver 1/2
- Magnifying Glass
- Pliers
- Wire Cutter
- Wire Crimper
- Fish Scaler
- Hook Disgorger
- Ruler (cm/inches)
- Multipurpose Hook (x2)
- Small Nail file (on one Multipurpose Hook)
- Large Blade w/Serrated Edge
- Inline Reamer/Punch*
- Wood Saw
- Scissors
- Screwdriver 2.5mm (x2)
- Pruning Blade
- Electrician's Blade
- Wire Scraper
- Pharmaceutical Spatula
- Watch Opener*
- Screwdriver 5mm (on Combo Tool)
- Nail File
- Nail Cleaner
- Metal Saw
- Metal File
- Chisel 4mm
- Large Blade
- Small Blade
- Bit Slotted 3mm*
- Bit Slotted 4mm*
- Bit Torx 6*
- Bit Torx 8*
- Bit Hex 1,2*
- Bit Hex 1,5*
- Bit Hex 2*
- Bit Hex 2,5*
- Bit Slotted 4mm
- Phillips Bit 2
- Phillips Bit 0 (Pozidrive)
- Phillips Bit 1 (Pozidrive)
- Torx Bit 10
- Torx Bit 15
- Hex Bit 4
- Torx Bit 8
- Bit Case (x2)
- 4mm Bitwrench (x2)
- Female Hex drive 5mm for D-SUB Connectors (x2)
- Female Hex Drive 4mm for Bits (x2)
- LED
- Mini Screwdriver
- Corkscrew
Pros:
- The ultimate expression of a Victorinox Swiss Army Knife
- Several tools that are unique to the XAVT in the 91mm range (*)
- A fantastic reference to all the 91mm tools that are available
Cons:
- Not really intended for EDC
- Super-wide width and extra weight make some tools difficult to use
- Very expensive
Bottom line:
The XAVT is an incredible SAK. Victorinox went out of their way to include not only every current tool in the 91mm range, but to even include tools borrowed from different ranges. Some may see it as a monstrosity, but it’s really a superb technical demonstration of what’s possible from Victorinox. I love it.

-
Day 28
The legendary Eggsecutive.

-
@Max Stone said:
Day 28Last model for the last 3 days...What I had to say when I reviewed it for my 30 day challenge last year:
What has 15 layers, weighs 12.6oz (356g) and is 2.5in (65mm) wide? As it’s Day 30, you’ve probably guessed...the Swiss Champ XAVT.
This is the largest 91mm SAK in the current range, adding 4 layers to the already large XLT, and comfortably doubling the width of the Swiss Champ. It’s like you glued two Swiss Champs together!
Surely this is too large to use and carry? But people do. It has an oversized leather case for belt carry, and while you need to stretch to get your hand around it, the tools are usable. It’s just a little cumbersome and heavy in the hand. Victorinox market the XAVT as geared for collectors, and I guess they’re right.
So what’s added to make up the extra layers? As most people are familiar with the Swiss Champ, I’ll discuss what’s extra compared to this model.
First there’s the digital scale with LCD display. Then paired to the inline Phillips is a universal wrench, the design borrowed from Wenger. It has two bit drivers, with an extra 4 bits not found on the CyberTools. The LED is the new transparent housing version with a much brighter and usable LED. Then there’s the very nice large serrated blade. This is from ‘new old stock’ as it has the older crossbow logo on the tang. Paired to this blade is an inline awl, like those found on the Alox Pioneers. (This is my favourite layer on the XAVT).
There’s the short pruner, electrician’s blade and pharmaceutical spatula as found on the XLT. And just for good measure, there’s a combo tool and a watch case opener.
The back has two hooks, one with the nail file, and two 2.5mm drivers. Along with what you’d expect, such as corkscrew (plus mini screwdriver), awl and chisel. The bottom scale houses the tweezers, toothpick, pen and pin...the same scales as found on the Traveler and other digital SAKs.
The total count of functions varies depending on where you look, between 80 and 83. Compare this to 33 for the Swiss Champ and 50 for the CyberTool L and you get and idea of just how impressive this monster really is.
But there’s some tool duplication, so a re-count of actual functions, with less creative license, tops out at 70. Still very impressive!
- Toothpick
- Tweezers
- Pressurized Ballpoint Pen
- Stainless Steel Pin
- Thermometer (C/F)
- Digital Watch (12h/24h)
- Alarm
- Countdown Timer
- Stopwatch
- Altimeter (m/ft)
- Barometric trend graph
- Reamer/Punch/Sewing Awl
- Can Opener (standard & combo tool)
- Screwdriver 3mm (on Can Opener)
- Bottle Opener (standard & combo tool)
- Wire Stripper (x2)
- Screwdriver 6mm (on Bottle Opener)
- Key Ring
- Universal Wrench M3/M4/M5*
- Inline Phillips Screwdriver 1/2
- Magnifying Glass
- Pliers
- Wire Cutter
- Wire Crimper
- Fish Scaler
- Hook Disgorger
- Ruler (cm/inches)
- Multipurpose Hook (x2)
- Small Nail file (on one Multipurpose Hook)
- Large Blade w/Serrated Edge
- Inline Reamer/Punch*
- Wood Saw
- Scissors
- Screwdriver 2.5mm (x2)
- Pruning Blade
- Electrician's Blade
- Wire Scraper
- Pharmaceutical Spatula
- Watch Opener*
- Screwdriver 5mm (on Combo Tool)
- Nail File
- Nail Cleaner
- Metal Saw
- Metal File
- Chisel 4mm
- Large Blade
- Small Blade
- Bit Slotted 3mm*
- Bit Slotted 4mm*
- Bit Torx 6*
- Bit Torx 8*
- Bit Hex 1,2*
- Bit Hex 1,5*
- Bit Hex 2*
- Bit Hex 2,5*
- Bit Slotted 4mm
- Phillips Bit 2
- Phillips Bit 0 (Pozidrive)
- Phillips Bit 1 (Pozidrive)
- Torx Bit 10
- Torx Bit 15
- Hex Bit 4
- Torx Bit 8
- Bit Case (x2)
- 4mm Bitwrench (x2)
- Female Hex drive 5mm for D-SUB Connectors (x2)
- Female Hex Drive 4mm for Bits (x2)
- LED
- Mini Screwdriver
- Corkscrew
Pros:
- The ultimate expression of a Victorinox Swiss Army Knife
- Several tools that are unique to the XAVT in the 91mm range (*)
- A fantastic reference to all the 91mm tools that are available
Cons:
- Not really intended for EDC
- Super-wide width and extra weight make some tools difficult to use
- Very expensive
Bottom line:
The XAVT is an incredible SAK. Victorinox went out of their way to include not only every current tool in the 91mm range, but to even include tools borrowed from different ranges. Some may see it as a monstrosity, but it’s really a superb technical demonstration of what’s possible from Victorinox. I love it.
Well, Max, you’ve definitely taken it to the max! Great write up too!

-
@Max The XAVT is really overkill but also very cool. One day I'll also buy one of those monsters.
-
Thanks Rizio, ulzhan

I think the engineers at Victorinox must have had fun designing it.
-
DAY 28
Got soaked at work more than once today. Was glad to finally get indoors. Had a bit of spare time at the end of the day and used the toothpick to clean around the nose pieces on my glasses and the tiny screwdriver to tighten the hinges a little bit. (Usually this is my tool for pushing in the tiny reset buttons on equipment.)

-
Day 28
Today the Swiss Champ failed me and I had to resort to a purpose built tool.
-
Day 28
Finished the camera strap today. The leather is still a little stiff, but it will get smooth pretty quickly once I use it.
For the next project I think I will make a mounting strap, so I can attach the camera to my backpack. Not sure yet how to do it, might be some trial and error needed




-
Day 28
Uses since the last post - scissors to open a packet of food, awl to open a parcel that contained other food...
You knew it had to happen though
Corkscrew ///
Phillips \
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login