SAK STACK 30 days challenge 2020 for Swisschamp, Cybertool & Toolchest
-
Thank you again, Zoidberg!

@ulzhan said:
@Rizio have the same beer at home.@Comis Thx for hosting this cool challenge!
It’s a fine beer, when I can find it!
Final thoughts on the SC and CT34
I haven’t used either very much before this challenge, especially the SC, so this was a good opportunity to concentrate on using them. From my perspective, both are a bit too large for EDC pocket carry, and I would prefer the tool mix on my InvesTigator or the Yeoman, but both would be serious contenders for putting in my work pack for the office we’re it not for February’s challenge which has given that job to a SwissTool Spirit Plus! Nonetheless, I can see myself swapping them around in that duty in future! I’ve also learnt the corkscrew far opening trick from here, and will definitely give the the can opener broken screw removal a go next time an opportunity presents itself! It’s been fun using the SC, and I’ll keep an eye out for another cheap CT lite (my CT34 started life as one until I modded it into a CT34 with central bit holder) as the magnifier is just so handy! -
My final tought on using SC and CyberTool.
SwissChamp is beast, i managed to do everything with SwissChamp. It isnt allways best tool MT to use but it managed to do everything.
CyberTool was new MT to me to use but it is great tool only downside is that Vic need to make more bits for it. I have same size bits but its not same as those double head bits Vic makes.
Only thing i would like to see is inline awl on regular SwissChamp.
Only Tools Matters
-

The little giveaway for the STACK challenge is actually a brand new 91mm Mountaineer, this model has been my EDC for many years and thanks again for everyone participating!
And here is the lucky draw and the winner. :D
https://www.youtube.com/watch?v=DyWF7kt4uU4 -
@ElevenBlade said:
Day 30For nostalgic reasons I opened a parcel with the small blade. It's my favorite and most used tool on the Champ. Normally none of the SAKs that I carry - Compact, PioneerX, Soldier - don't have a small blade. I've had a few traditional folders, and the small blade on those always felt right to me. Even before, and well after those days, I have found the small blade on the 91mm models to be the right tool for a lot of jobs.

Over the last month, I have been keeping track of how many times I use the Phillips or the Corkscrew - to try to answer the age-old question. Which is more useful.
This was a bit of an unusual month, to say the least. I didn't go outdoors, or do the things I normally would. That said, I expected to use the corkscrew more - and indeed I did. I use the corkscrew for non-cork related things in general. this month I opened two jars, and a bottle of wine. Opening jars was a recent discovery for me, courtesy of MTo, and it's worked great. I'll have wine with the appropriate sort of meal on occasion, usually with friends in unexpected places, and so it does come in handy for that too. If I'm honest though, the corkscrew frustrates me since it doesn't have a lever arm like "modern" or dedicated ones do. I've considered getting a LM Juice or a Gerber Armbar Cork for that reason, but the trade off doesn't seem worth it. For now I'll just grunt and sweat, and stabilize the bottle between my knees, pulling with all my might. The scene usually turns my friends off to the idea of sharing the wine, and there's plenty more for meCorkscrew ///
Phillips \One word: Winemaster!
-
@comis said:

The little giveaway for the STACK challenge is actually a brand new 91mm Mountaineer, this model has been my EDC for many years and thanks again for everyone participating!
And here is the lucky draw and the winner. :D
https://www.youtube.com/watch?v=DyWF7kt4uU4I don't wanna spoil, so I won't name the person I am hereby congratulating! (spoiler: it's not yours truly)
-
@comis said:

The little giveaway for the STACK challenge is actually a brand new 91mm Mountaineer, this model has been my EDC for many years and thanks again for everyone participating!
And here is the lucky draw and the winner. :D
https://www.youtube.com/watch?v=DyWF7kt4uU4Very generous of you, Comis! I was on the edge of my seat during the draw.

-

Swiss Army Knights -- The Great Backspring Tool Conundrum
How many times did you use the Corkscrew (CS) or the Phillips Screwdriver (PSD) during the challenge?I hope I listed everyone in the challenge here. I filled in a few tallies when I was able to see them easily, and will try to update slowly as I can go through all the posts. If you'd like, please fill yours in
Sos24,
Max,
Alan
Antti Lammi,
Ulzhan,
Comis CS-1, PSD-3
SirVicaLot CS-2, PSD-5
Simon_Templar
Rizio II Ghiro,
CraftsmanSAK,
ElevenBlade CS-3, PSD-1
Ivo
-
Congrats
Spoiler:
sos24on winning the Mountaineer!

-
@ElevenBlade said:
I hope I listed everyone in the challenge here.Wait, you're missing Cody!

Swiss Army Knights -- The Great Backspring Tool Conundrum by ElevenBlade
How many times did you use the Corkscrew (CS) or the Phillips Screwdriver (PSD) during the challenge?Sos24,
Max,
Alan
Antti Lammi,
Ulzhan,
Comis CS-1, PSD-3
SirVicaLot CS-2, PSD-5
Simon_Templar
Rizio II Ghiro,
CraftsmanSAK,
ElevenBlade CS-3, PSD-1
Ivo
Cody6268
-
I did use 3 times phillips and i dont recall using corkscrew for anything during this challenge, tho i used it today with miniscrewdriver in it.
Only Tools Matters
-
@comis said:
Wait, you're missing Cody!
Swiss Army Knights -- The Great Backspring Tool Conundrum by ElevenBlade
How many times did you use the Corkscrew (CS) or the Phillips Screwdriver (PSD) during the challenge?Sos24,
Max,
Alan
Antti Lammi,
Ulzhan,
Comis CS-1, PSD-3
SirVicaLot CS-2, PSD-5
Simon_Templar
Rizio II Ghiro,
CraftsmanSAK,
ElevenBlade CS-3, PSD-1
Ivo
Cody6268
Corkscrew twice, by only in deployment of the fine screwdriver stored onboard. Phillips, twice. The big slotted driver, can opener SSD and back technician driver, once each.
-
Sorry Cody....

I'd definitely count the small SD as a Corkscrew use. It's an excellent reason to have the Corkscrew on board.... if you know you're more likely to use the small SD instead of the Phillips,
Swiss Army Knights -- The Great Backspring Tool Conundrum by ElevenBlade
How many times did you use the Corkscrew (CS) or the Phillips Screwdriver (PSD) during the challenge?Sos24,
Max,
Alan
Antti Lammi, CS-1, PSD-3
Ulzhan,
Comis CS-1, PSD-3
SirVicaLot CS-2, PSD-5
Simon_Templar
Rizio II Ghiro,
CraftsmanSAK,
ElevenBlade CS-3, PSD-1
Ivo
Cody6268 CS-1, PSD-2
-
@ElevenBlade said:
Sorry Cody....
I'd definitely count the small SD as a Corkscrew use. It's an excellent reason to have the Corkscrew on board.... if you know you're more likely to use the small SD instead of the Phillips,
Swiss Army Knights -- The Great Backspring Tool Conundrum by ElevenBlade
How many times did you use the Corkscrew (CS) or the Phillips Screwdriver (PSD) during the challenge?Sos24,
Max,
Alan
Antti Lammi, CS-1, PSD-3
Ulzhan,
Comis CS-1, PSD-3
SirVicaLot CS-2, PSD-5
Simon_Templar
Rizio II Ghiro,
CraftsmanSAK,
ElevenBlade CS-3, PSD-1
Ivo
Cody6268 CS-1, PSD-2
I used the CS 2x, and the mini screwdriver 2x - only used Philips via bitdriver on CT34 1x
Congratulations to the giveaway winner (no spoiling from me either)!

-
Swiss Army Knights -- The Great Backspring Tool Conundrum by ElevenBlade
How many times did you use the Corkscrew (CS) or the Phillips Screwdriver (PSD) during the challenge?Sos24,
Max,
Alan
Antti Lammi, CS-1, PSD-3
Ulzhan,
Comis CS-1, PSD-3
SirVicaLot CS-2, PSD-5
Simon_Templar
Rizio II Ghiro, CS-4, PSD-1
CraftsmanSAK,
ElevenBlade CS-3, PSD-1
Ivo
Cody6268 CS-1, PSD-2
-
@ElevenBlade said:
Swiss Army Knights -- The Great Backspring Tool Conundrum by ElevenBlade
How many times did you use the Corkscrew (CS) or the Phillips Screwdriver (PSD) during the challenge?I didn't keep track of exactly how many times I used each, but I'm guessing I used the corkscrew once maybe twice, but the Phillips was used quite a bit on battery doors, electronic equipment, etc... They both have their place and time when I'm glad I have 'em. Although - I'm now waiting on the Champion to be repaired where I broke off the tip of the corkscrew. :-\
-
Badge awarded to: CraftsmanSAK.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
