What did you use your Sak on today?
-
I love stroopwafels

-
Me too. I was born in Gouda, Stroopwafel City 8)
-
I was born in Dordrecht
don’t know what that is famous for
-
Used the scraper tool on the Spirit to remove the fake wood backing on a composite board. The scraper made it easy to lift enough of it, so i could pull the rest off easily. Don’t know why other companies don’t pick up on this tool, it is awesome. Easily in the Top 3 of my most used tools on the Spirit.

While we are at it, hey Vic, I want that tool on a 93mm Alox


-
I only lived there until I was 16
Then I came to England and never been back since -
Pull chain broke on the ceiling fan light. Had to disassemble the tiny clicker mechanism. Not intended for service as it is riveted closed, but managed to drill these out, extract what was left of the chain inside the module and put it all back together. Has some M2 bolts that were good to close it up. Trick was to twist the two halves around to pre-load the spring. SC helped with the pliers for grabbing the tiny chain and holding the nut on reassembly. Inline Phillips essential for clearance when screwing it back into the fitting. Only missed having a fine electrician’s flat for the cable block.



-
I just installed some trim on a wall panel for accessing the crawl space/storage space underneath the roof. It's a knieschotluik in Dutch... no idea how to translate it :D
Anyways I cut the trim with my kataba and used the Swisstool's file to touch up the miters.

-
Nice Reinier

Maybe ‘knee scuttle out’?
-
@Max Stone said:
Pull chain broke on the ceiling fan light. Had to disassemble the tiny clicker mechanism. Not intended for service as it is riveted closed, but managed to drill these out, extract what was left of the chain inside the module and put it all back together. Has some M2 bolts that were good to close it up. Trick was to twist the two halves around to pre-load the spring. SC helped with the pliers for grabbing the tiny chain and holding the nut on reassembly. Inline Phillips essential for clearance when screwing it back into the fitting. Only missed having a fine electrician’s flat for the cable block.
Well done [emoji106] That flathead you’ve mentioned is the only thing I miss on my Work Champ so far
-
The back tool flat is about the right size and has enough depth to it, I just have not mastered one-handed turning with back tools. Almost worth cutting back the tin opener to make a small inline flat.


-
Great uses everyone

-
Some light kitchen duty.



-
Nice pics Max

-
Thanks Eleven, Reinier

-
Great use Max

-
Thank you Wim.

-
I used my Cybertool's corkscrew to untie a rope (needed to fly the flag at half-mast). Worked well.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login