My tool pouch project...
-
(Mods, I'm not sure exactly where to post this so please move it if necessary. :) )
I wanted to share with you all a project of mine. Here's what I came up with to hold some of my tools and give my pockets some relief:
I started with the nylon pouch that came with my Leatherman Core. It was immediately clear that there was extra room inside it- I found I could add a 4" crescent wrench, a small cut down pry bar and a Pocketwrench II easily. To allow for individual tool removal I formed a Kydex sleeve to fit inside and allow a single tool to be removed/inserted without effecting the the others. This sleeve is held in place by the Chicago screws that hold the Tek-Lok to the pouch. The Tek-Lok has a Sharp Shim installed. The bottom of the Tek-Lok is held to the sheath by the screws that BladeTech supplies. To these screws I added a Kydex sleeve that is formed to hold a Gerber EAB- It slips in from the side. The black Nylon strip you see covering the EAB is velcro-ed in place to protect my pants from the edges of the EAB (it doesn't take much to wear a hole in pants over time). Inside the tab I've slid in a Sliver Gripper. Below this I have a Mini-Bic that is held in place with velcro. On the front flap I added 2 snaps because the velcro had worn out. The red rubber piece glued to the Tek-Lok is to prevent slippage on my belt.
The side has a LRI Photon Proton pouch attached using the horizontal belt loops on the LM pouch. Inside it rides my back-up EX-10 and a 30" roll of Gorilla Tape. Between them I have slid in the spare razor blade and behind it rides a nail punch.
All the gear:

The tweezers home: I pulled them out a bit to help you see better:

The DMT Sharp Shim in position to sharpen:



-
Oooh, so you're THAT guy. :D Glad to have you hear mate!

-
Very nice you are so much better orgenized than i am. I am the guy with a leatherman and a pocket full of SAKs. I like all my SAKs so much i have a a hard time desideing witch ones to carry.
Mike -
Great Dude!

-
I often time wear a NiteIze Multi Pockits. Similar set up. In it I carry my SURGE!, blade exchanger, 2 bit cards, a SOG Vulcan (or a hobo tool or Topeak Alien multitool, depending on my needs ), Jetbeam JetI PRO, spare AA battery, and a Swisscard. To be honest, I almost like your set-up better. With everything being purpose built to hold the item it's carrying, it's a lot better laid out. Really nice job.
-
The first time I had seen that configuration on <insert-other-forum-name> I was like "OMG that pouch is teh awesome!!!11" (or something along those lines... :D). It's too big/bulky/heavy for my taste (I strayed away from belt carry some years ago and now carry everything I use daily in my pants pockets), but it is an impressive piece of DIY gear nevertheless.
-
@noth said:
The first time I had seen that configuration on <insert-other-forum-name> I was like "OMG that pouch is teh awesome!!!11" (or something along those lines... :D). It's too big/bulky/heavy for my taste (I strayed away from belt carry some years ago and now carry everything I use daily in my pants pockets), but it is an impressive piece of DIY gear nevertheless.It's funny how we can all be so similar and yet so different at the same time: I find that a lot of stuff in my pockets drives me crazy :)
Thank you guys for the props
:D -
The pouch on the side holding the EX10 - is that something you made or something you bought and attached? I'm going to be picking up an EX10 in about a month and would love to get a little pouch like that for it.
As for your whole setup
. Looks well thought out an nicely executed my man. -
Good to have you here... I saw it on the "other side" too and thought it was a great idea :D
-
@GMArthur said:
The pouch on the side holding the EX10 - is that something you made or something you bought and attached? I'm going to be picking up an EX10 in about a month and would love to get a little pouch like that for it.That is an LRI Photon Proton pouch. I wanted a couple more of them for spares and so I wrote to LRI asking if I may purchase a few. They promptly sent me a couple for free

-
Nice setup you have there

-
Very fine rig that mate 8)
-
I don't think I've ever seen so many gadgets in one place.. :)
Real nice job..
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login