Why I don't like backside tools.
-
I’m not to fond of the backside tools, when I was 12 my grandfather bought me my first sak, a champion, and of course being a kid you gotta try all tools out and one of the first things I did was use the corkscrew, only thing was I drilled it into a tree, and not being so soft of a wood wasn’t to smart, it snapped the tool right at the base, well, you learn..
anyway after joining here I learned about the alox side of sak and I like them better, no backside tools and even better I like the metal.. just they don’t have all the goodies that the larger ones have, so I had one custom made buy one of our own, again no backside tools but I got that Philips! Yet now victorinox is putting out the FarmerX this year and it’s pretty close to what I had made, just no Philips, so maybe next year? Guess we’ll see..
JR -
@Sos24 said:
I have never had a backside tool fail, but I also don’t use them that much.In actual use, even the backside phillips isn’t as useful for me because of its location in the middle instead of an end. There frequently isn’t sufficient room.
In some ways I like the 93mm SAK sleek look a feel with no back tools, but I hate the limited offerings and that I loose the scales tools. At a minimum they need a Farmer-X.
Ask and ye shall receive, it being released later this year I believe

-
I'm also firmly in Carls camp regarding back tools. I much prefer the smooth feel and find the backside tools much more fiddly to use than the utility they provide.
The inline dedicated all on the Pioneer is vastly better at drilling/ reaming for my uses than the reamer/awl on tinkers/Spartans etc . But then again I've never needed to sew heavy duty stuff together, so for someone else it may be their go to tool. That said the small blade is the one tool I miss most when carrying the Pioneer
Regarding breaking tools, I would be so bold as to venture that most of us know damn well when we are asking much more of a tool than it is designed for. My take is that you are of course free to do so, but never forget that when you throw your money on the table, you dont everytime get it back, and you went into it knowing that.
It'd be a boring word if we were all the same eh?
-
Largely agree with the OP. I do like to have a corkscrew at hand, though. I only have SAKs with the back side Phillips for their handling comfort. IME the tip of the can opener works just fine except in cases of extreme torque (apply too much and the tip twists before the pin does) and where deep access is needed. And the back side awl is a miserable thing compared to the 93mm one. I can see a way of improving it a little - at the cost of the nail nick.
The only thing I wish for on the Pioneer is a small blade in addition to the awl and openers. I find the Pioneer's blade too thick and wedgy sometimes. It's even thicker along the spine than the 111mm blade. The 58mm blade on my keyring is too flexible for my liking.
@Storm said:
I'm also firmly in Carls camp regarding back tools. I much prefer the smooth feel and find the backside tools much more fiddly to use than the utility they provide.
The inline dedicated all on the Pioneer is vastly better at drilling/ reaming for my uses than the reamer/awl on tinkers/Spartans etc . But then again I've never needed to sew heavy duty stuff together, so for someone else it may be their go to tool. That said the small blade is the one tool I miss most when carrying the Pioneer
Regarding breaking tools, I would be so bold as to venture that most of us know damn well when we are asking much more of a tool than it is designed for. My take is that you are of course free to do so, but never forget that when you throw your money on the table, you dont everytime get it back, and you went into it knowing that.
It'd be a boring word if we were all the same eh?
Agreed and well said!
-
@Sawl Goodman said:
Largely agree with the OP. I do like to have a corkscrew at hand, though. I only have SAKs with the back side Phillips for their handling comfort. IME the tip of the can opener works just fine except in cases of extreme torque (apply too much and the tip twists before the pin does) and where deep access is needed. And the back side awl is a miserable thing compared to the 93mm one. I can see a way of improving it a little - at the cost of the nail nick.The only thing I wish for on the Pioneer is a small blade in addition to the awl and openers. I find the Pioneer's blade too thick and wedgy sometimes. **It's eventhicker along the spine than the 111mm blade. **The 58mm blade on my keyring is too flexible for my liking.
Agreed and well said!
I hadn't noticed this. I need to pay attention to it's performance in kitchen duties.
Being overly thick can be problematic - it's been noted that Bushcraft fixed blades will break an apple in two, rather than slice them.
If I could get a small blade on a 93mm.... Oh the places I could go.
-
@ElevenBlade said:
If I could get a small blade on a 93mm.... Oh the places I could go.You and me both brother !
(although I think there'd be more than just us two fizzing at the bung for such a knife
) -
On a day-to-day basis I find the back tools (and scale tools) just add too much versatility and capability to a SAK to pass up, though I strongly prefer the corkscrew over the backside Philips.
However, if I were headed somewhere (especially for an extended period of time) where a replacement SAK might be difficult or impossible to come by (and or an "every ounce counts" situation where I might not have a backup handy), I might very well accept less versatility in exchange for the increased ruggedness of the 93mm line.
-
@ElevenBlade said:
If I could get a small blade on a 93mm.... Oh the places I could go.I might be missing something here, but I'm assuming you are aware of the current 93mm models with the electrician's blade or the pruner blade, as well as the now discontinued Pioneer Settler with the small spear/pen blade?
-
Yup, gimme a 93mm any day of the week. The 91mm’s just feel flimsy. I carry a 58mm for the scale tools.
-
@nate j said:
I might be missing something here, but I'm assuming you are aware of the current 93mm models with the electrician's blade or the pruner blade, as well as the now discontinued Pioneer Settler with the small spear/pen blade?I am aware of them, but I'd be after the small, and more importantly thin blade of the 91mm range as it's such a wee scalpel compared to the big chunky 93mm main blade. The hang up for me would be that I make extensive usage of the small screwdriver tip on the can opener for my Phillips screw needs . Cant have the cake and eat it I suppose
-
@nate j said:
I might be missing something here, but I'm assuming you are aware of the current 93mm models with the electrician's blade or the pruner blade, as well as the now discontinued Pioneer Settler with the small spear/pen blade?I wasn't aware of the Settler. But yes, it's the small spear point, razor sharp, super thin blade that I like. Though by force of habit I almost never use or carry one outside the house.
Edit:
I realized that my response, word choices, and sentence structure were almost identical to Storm's... So I made some adjustments.

-
@Storm said:
You and me both brother !
(although I think there'd be more than just us two fizzing at the bung for such a knife
)

I have to say though... After fussing over my neglected Compact today... It's a trade off between elegance and design... Or utility and versatility. There's just something about the availability of tweezers and a corkscrew, and the shiny sleek scales on the 91mm.

-
@Storm said:
Ask and ye shall receive, it being released later this year I believe
I saw that, although I was mentioning that because the huntsman/fieldmaster seem a popular toolset. The one I would really love to see is adding the magnifying glass and inline Phillips to the Pioneer-X, but I doubt that is as popular of a toolset especially for those liking the more ruggedness of the 93mm.
-
@Sos24 said:
I saw that, although I was mentioning that because the huntsman/fieldmaster seem a popular toolset. The one I would really love to see is adding the magnifying glass and inline Phillips to the Pioneer-X, but I doubt that is as popular of a toolset especially for those liking the more ruggedness of the 93mm.I'm looking forward to the Farmer X and at the same time I'm not... I think it is going to be too heavy to EDC, and at the same time make every other SAK I have suddenly, undeniably, unfortunately obselete.
-
@ElevenBlade said:
I'm looking forward to the Farmer X and at the same time I'm not... I think it is going to be too heavy to EDC...Let's do some SAK math (with apologies to our friends who use the metric system, all weights below are in ounces):
Weight of 93mm Scissors Layer = Weight of Pioneer X - Weight of Pioneer = 3.3 - 2.5 = 0.8
Estimated Weight of Farmer X = Weight of Farmer + Weight of 93mm Scissors Layer = 3 + 0.8 = 3.8
So, at 3.8 ounces, the Farmer X is heavier than the Huntsman, Fieldmaster, and Explorer, at 3.4, 3.5, and 3.6 ounces, respectively, but not by much. It would actually be exactly the same as the Mountaineer, and lighter than the Deluxe Tinker at 4.3 ounces.
Obviously whether or not a knife is too heavy to EDC is an individual decision. However, for anyone already carrying a 4-layer 91mm SAK (even the lightest, the Huntsman), I don't think the Farmer X would be much of an adjustment.
-
@nate j said:
Let's do some SAK math (with apologies to our friends who use the metric system, all weights below are in ounces):Weight of 93mm Scissors Layer = Weight of Pioneer X - Weight of Pioneer = 3.3 - 2.5 = 0.8
Estimated Weight of Farmer X = Weight of Farmer + Weight of 93mm Scissors Layer = 3 + 0.8 = 3.8
So, at 3.8 ounces, the Farmer X is heavier than the Huntsman, Fieldmaster, and Explorer, at 3.4, 3.5, and 3.6 ounces, respectively, but not by much. It would actually be exactly the same as the Mountaineer, and lighter than the Deluxe Tinker at 4.3 ounces.
Obviously whether or not a knife is too heavy to EDC is an individual decision. However, for anyone already carrying a 4-layer 91mm SAK (even the lightest, the Huntsman), I don't think the Farmer X would be much of an adjustment.

Plus its got one other thing going for it;
It's Alox!**
-
Plus its got one other thing going for it;
It's Alox!**
Indeed, there are several things to like about it! Alox, stronger tools, Alox, durable construction, Alox, no backspring tools, Alox, wider blade, Alox. 😀
@nate j said:
Let's do some SAK math (with apologies to our friends who use the metric system, all weights below are in ounces):Weight of 93mm Scissors Layer = Weight of Pioneer X - Weight of Pioneer = 3.3 - 2.5 = 0.8
Estimated Weight of Farmer X = Weight of Farmer + Weight of 93mm Scissors Layer = 3 + 0.8 = 3.8
So, at 3.8 ounces, the Farmer X is heavier than the Huntsman, Fieldmaster, and Explorer, at 3.4, 3.5, and 3.6 ounces, respectively, but not by much. It would actually be exactly the same as the Mountaineer, and lighter than the Deluxe Tinker at 4.3 ounces.
Obviously whether or not a knife is too heavy to EDC is an individual decision. However, for anyone already carrying a 4-layer 91mm SAK (even the lightest, the Huntsman), I don't think the Farmer X would be much of an adjustment.
Brilliant! Now SAK math is something I can get my head around. So you're saying:
~Fx = F + (Px - P)
Makes sense to me!
Somehow I've found the difference between the PioneerX and the Pioneer to be significant enough that I started using a suspension clip. Shape may play into that more than weight alone. It's most certainly going to turn sideways in the pocket.
Still.... We're going to have to get one... Won't we?
-
Just looking through some of my SAK's and I'll agree with this for one backside tool I never use, because I know the tip will just bend with hardly any force applied and that's the fine screwdriver. I've used and will continue to use all the other backside tools on my SAKs going forward except for this particular one simply because it is far too weak.
-
@Rich S said:
I've used my 25+ year old Tinker for all sorts of things, but it doesn't replace full size tools, and has served me well. Everyone has their own personal ways of using their knives.Rich

I love my SuperTinker. I like the backside Phillips, I use it for recessed electronics screws. I know the Explorer has the inline but I don't want to carry anything bigger then a 3 layer. Between the Can opener and the backside Phillips I can handle 90% of all the screws I encounter. The scissors is the similar as some don't like the spring on the Victorinox and prefer the Wenger bar lever type. I like Victorinox because if it breaks I can replace it but if the Wegner type breaks you can't fix it easily.
-
@ElevenBlade said:
So you're saying:~Fx = F + (Px - P)
Makes sense to me!

@ElevenBlade said:
We're going to have to get one... Won't we?Oh, I'll probably have to get several... :D
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
