Billhooks
-
Maybe not :)
Lets face it, this is a hard working utility chopper and that's what it'll get used for again so I'm not about to spend three weeks on a handle for it :)
First issue is that I don't have a lump of wood big enough to make a new handle
Might have to get inventive... I've plenty of plywood :D -
How about the mother of all parawraps :D
Can the original handle be salvaged ???
-
@Mike, Lord of the Spammers! said:
How about the mother of all parawraps :DCan the original handle be salvaged ???
Only with a huge amount of epoxy.
I've removed the rust now and and see that it was made my John Guy and Company Limited. I was hoping that after rust removal I might just be able to redo the edge but it looks like a little more work will be involved.
-
Isn't that always the way ::)
-
:D True.
-
That's half the fun. :D
-
Is it done yet? ::)
-
Maybe you could scrounge up a pre-made tool handle like for a turning chisel...or a discarded chair leg?
-
I'd been thinking along those lines. I have an old lamp in the shed with a mahogany stand that I briefly considered but I think I'd like to do the lamp up.
My next thought was, what would the original owner of the chopper (for lack of a proper name) have done? Probably walked down to the local ironmonger and bought a handle. I don't have that option these days :( However I do have the internet so one quick google later I found a reasonably priced source of billhook handles. These look the ticket, I'll probably just give one a soak in linseed oil and bosh it on there :D

-
Will that be long enough? If you are planning to use epoxy I would suggest setting that before applying the Linseed oil.
-
Should be OK. The site says its 6" which is just a little longer than the original handle. I'm not sure until the handle arrives how I'm going to fix it in. On the original handle the tang's tail was bent over at the end..
As the new handle is a little longer do I shorten the handle and duplicate the original fixing or do I put a pin through tang and handle? Or, simpler still, rely on the wonder that is modern glue to hold it in place?Yes, you are of course correct about the epoxy/oil order :D
-
Glad to hear you're getting a handle on things Neil
:D -
Are we still waiting for the Spam Lord to get a Billhook? ::)
-
If that one doesn't work out then the Woodsmith's store has a couple of options.
-
@Mike, Lord of the Spammers! said:
@SporkBob NoPants said:
Are we still waiting for the Spam Lord to get a Billhook? ::)
Yes we are :-[
But sadly as Chrissy pointed out in another thread, I've got to be a bit careful with money for the next 3 months :-\
Somebody has to keep you on the straight and narrow,and I've a feeling she could do it,and not break a sweat

-
...and I'm here to tempt him...

-
@I'm Still Bison said:
@Mike, Lord of the Spammers! said:
@SporkBob NoPants said:
Are we still waiting for the Spam Lord to get a Billhook? ::)
Yes we are :-[
But sadly as Chrissy pointed out in another thread, I've got to be a bit careful with money for the next 3 months :-\
Somebody has to keep you on the straight and narrow,and I've a feeling she could do it,and not break a sweat

Well I'll be running all future decisions by her first, especially regarding the ladies :D
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login