The Nessmuk Challenge
-
Nice trio Nix, like the look of that Kukri

For sure my Axe will be the one i modded in Choptober

For the fixie i was going to use an Eldris or #2 but i had a blank arrive the other day so would like to use that, i have time..i think

I'm not sure which folder as yet, it really is a tough decision that one

-
Nice blank there, Borg.
Your axe is a perfect choice; no question. A real beauty.
Any thoughts on the handle for that blank?
-
@Nix said:
I haven't settled on my Nessmuk trio quite yet. However, after tossing out that Kukri idea, I began to consider using a Kukri as my 'chopper' in place of the more traditional Nessmuk axe.This could be--I haven't finalized my choices yet!--my 'trio' for the challenge:

This seems like a fairly balanced and capable trio, to me.
-
Vic Cadet: I'm 99% certain a Cadet will be my small folder. I've though about a Trad Barlow or Stockman, but I like the idea of having a SAK for the challenge. The Cadet has to be the most underrated SAK ever. It is marvelously light and very thin. It's as easy to carry a Cadet as it is to carry a Classic. And with the Cadet I have a little pry power, some drivers, and a can opener. Adding this knife to the load will be easy and effortless.
-
The fixie: This is a locally-made knife. Dave at the sporting goods store makes these as a hobby and sells a few. It is loosely based on a colonial American 'belt knife', but I think of it as a 'Bird and Trout' knife. With a 4.25" blade it's probably a bit long for a true Bird & Trout, but it has given good service. It's other virtues are a thin and light blade. This is an easy fixie to EDC, although it's length is a minor strike against it. I don't think it is really rugged enough to be a good 'Bushcrafting' knife.....but....if you have a Kukri at hand, you have other options for heavy-duty work.
-
The Kukri (or Khukuri, but for this thread I'm sticking with Kukri.): Born as an agricultural multitool to meet the needs of a mountain culture, the kukri resonates with me. It's ferocious military history gives it a bit of added mystique, too. Nevertheless, I usually take an axe with me when I anticipate heavy cutting or chopping. In that respect, the challenge could be an interesting event to test out the kukri and see if it works in the context of a Nessmuk trio. In it's sheath, it weighs about 2 pounds. 2 pounds is often the weight cited for Nessmuk's little axe. So that's a fair trade in terms of weight.
I have to think about this a little bit, but a small SAK, delicate belt knife, and stout chopper seem like they could be a lot of fun for a 30-day challenge.
Like you said, Nessmuk carried a small axe. So not much of the rather modern lumberjack fantasy, but rather a realistic tool where the Kukri might be on the same level. I know you'd probably forego the smaller companion blades a traditional Kukri comes with, but that would be an interesting test in itself.
I'll be the first to admit that my knowledge on the subject is very limited and comes down to the cool factor so this might be an absolute fallacy on my part. -
-
@Nix said:
I haven't settled on my Nessmuk trio quite yet. However, after tossing out that Kukri idea, I began to consider using a Kukri as my 'chopper' in place of the more traditional Nessmuk axe.This could be--I haven't finalized my choices yet!--my 'trio' for the challenge:

This seems like a fairly balanced and capable trio, to me.
-
Vic Cadet: I'm 99% certain a Cadet will be my small folder. I've though about a Trad Barlow or Stockman, but I like the idea of having a SAK for the challenge. The Cadet has to be the most underrated SAK ever. It is marvelously light and very thin. It's as easy to carry a Cadet as it is to carry a Classic. And with the Cadet I have a little pry power, some drivers, and a can opener. Adding this knife to the load will be easy and effortless.
-
The fixie: This is a locally-made knife. Dave at the sporting goods store makes these as a hobby and sells a few. It is loosely based on a colonial American 'belt knife', but I think of it as a 'Bird and Trout' knife. With a 4.25" blade it's probably a bit long for a true Bird & Trout, but it has given good service. It's other virtues are a thin and light blade. This is an easy fixie to EDC, although it's length is a minor strike against it. I don't think it is really rugged enough to be a good 'Bushcrafting' knife.....but....if you have a Kukri at hand, you have other options for heavy-duty work.
-
The Kukri (or Khukuri, but for this thread I'm sticking with Kukri.): Born as an agricultural multitool to meet the needs of a mountain culture, the kukri resonates with me. It's ferocious military history gives it a bit of added mystique, too. Nevertheless, I usually take an axe with me when I anticipate heavy cutting or chopping. In that respect, the challenge could be an interesting event to test out the kukri and see if it works in the context of a Nessmuk trio. In it's sheath, it weighs about 2 pounds. 2 pounds is often the weight cited for Nessmuk's little axe. So that's a fair trade in terms of weight.
I have to think about this a little bit, but a small SAK, delicate belt knife, and stout chopper seem like they could be a lot of fun for a 30-day challenge.
Lovely Kukri or Khukuri, I have always heard about it being a fearsome weapon favored by Gurkhas for many years, but really didn't get a chance to handle one or use one myself. I would love to it put in good use, to see how this weapon/tool adapted in modern day life.@Borg said:
For the fixie i was going to use an Eldris or #2 but i had a blank arrive the other day so would like to use that, i have time..i think@Nix said:
Nice blank there, Borg.Your axe is a perfect choice; no question. A real beauty.
Any thoughts on the handle for that blank?
Borg, same question...you totally just peak my curiosity and it'd be awesome to use something you'd put together yourself.

-
-
@Nix said:
I haven't settled on my Nessmuk trio quite yet. However, after tossing out that Kukri idea, I began to consider using a Kukri as my 'chopper' in place of the more traditional Nessmuk axe.This could be--I haven't finalized my choices yet!--my 'trio' for the challenge:

This seems like a fairly balanced and capable trio, to me.
-
Vic Cadet: I'm 99% certain a Cadet will be my small folder. I've though about a Trad Barlow or Stockman, but I like the idea of having a SAK for the challenge. The Cadet has to be the most underrated SAK ever. It is marvelously light and very thin. It's as easy to carry a Cadet as it is to carry a Classic. And with the Cadet I have a little pry power, some drivers, and a can opener. Adding this knife to the load will be easy and effortless.
-
The fixie: This is a locally-made knife. Dave at the sporting goods store makes these as a hobby and sells a few. It is loosely based on a colonial American 'belt knife', but I think of it as a 'Bird and Trout' knife. With a 4.25" blade it's probably a bit long for a true Bird & Trout, but it has given good service. It's other virtues are a thin and light blade. This is an easy fixie to EDC, although it's length is a minor strike against it. I don't think it is really rugged enough to be a good 'Bushcrafting' knife.....but....if you have a Kukri at hand, you have other options for heavy-duty work.
-
The Kukri (or Khukuri, but for this thread I'm sticking with Kukri.): Born as an agricultural multitool to meet the needs of a mountain culture, the kukri resonates with me. It's ferocious military history gives it a bit of added mystique, too. Nevertheless, I usually take an axe with me when I anticipate heavy cutting or chopping. In that respect, the challenge could be an interesting event to test out the kukri and see if it works in the context of a Nessmuk trio. In it's sheath, it weighs about 2 pounds. 2 pounds is often the weight cited for Nessmuk's little axe. So that's a fair trade in terms of weight.
I have to think about this a little bit, but a small SAK, delicate belt knife, and stout chopper seem like they could be a lot of fun for a 30-day challenge.
Beautiful khukuri and belt knife there Nix!

Sent fra min FRD-L09 via Tapatalk
-
-
Nix and comis, original plan was birch bark but the tree i had in mind wasn't suitable, i will come across one that is at some point and will certainly try it on another blade, plan changed to brass bolster, 1mm black spacer, 1mm copper, black, copper then stacked leather and copper, brass and black spacers at the end, the brass i have will probably give me both bolster and pommel if i'm careful


I love the handle shape of this Sheffield one i have so i am aiming at similar shape to that, it's nice and narrow and fits my hand perfectly but that can change, i just have to wait and see what the leather offers me, sometimes these things just develop themselves as you go along, it could end up different to plan



-
@Borg said:
Nix and comis, original plan was birch bark but the tree i had in mind wasn't suitable, i will come across one that is at some point and will certainly try it on another blade, plan changed to brass bolster, 1mm black spacer, 1mm copper, black, copper then stacked leather and copper, brass and black spacers at the end, the brass i have will probably give me both bolster and pommel if i'm careful

I love the handle shape of this Sheffield one i have so i am aiming at similar shape to that, it's nice and narrow and fits my hand perfectly but that can change, i just have to wait and see what the leather offers me, sometimes these things just develop themselves as you go along, it could end up different to plan



Plan B sounds like it will look beautiful

Sent fra min FRD-L09 via Tapatalk
-
Pays to stay flexible!
(But I like where you are going here.....
) -
that turned out great
-
Borg, I too think the Sheffield is a pretty good reference and love where this is going. The brass/black/brass ending pommel should make it look even more interesting with a through tang.

-
Yes, I like how the top of the handle tapers out at the pommel in that Sheffield. I'll be making something similar handle wise.
-
@JK said:
Yes, I like how the top of the handle tapers out at the pommel in that Sheffield. I'll be making something similar handle wise.
I know we have some pretty talented folks here on the thread, so if you are making/modding/furnishing your own knife/axe/chopper/SAK, by all means, please post some photo and I'd love to see the progress!

-

Cool jig!
-
Might take me a while to find enough 20/30m breaks to finish this one... It's my first attempt so it's just an 85mm Lauri blade on regular chestnut...

-
Good start JK

Sent fra min FRD-L09 via Tapatalk
-
-
Cool jig indeed!

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

