What do we have on the way?
-
A Fiskars X5 camp/freetime axe is on the way to my local DIY for pickup.
It's not that expensive, but somehow I kept postponing getting one
-
@Mechanickal said:
A Fiskars X5 camp/freetime axe is on the way to my local DIY for pickup.
It's not that expensive, but somehow I kept postponing getting one
I have a bit bigger version of that, and it's pretty handy without weighing me down. But just for cutting, due to the polymer handle being molded over the head, as opposed to being mounted properly. If I need to chop light limbs, and my small folding saws/SAK isn't going to cut it; this ax allows me to have the cutting power of my Estwing in less than half the weight in the pack.
I am hoping, finally, that once the work is done, I will have a nice gaming PC, which I should've had out of the box; but the power supply was faulty--light use is fine, but any load will make it shut down unexpectedly due to the bad power supply. And 16GB of RAM is going in the PC while I'm at it as opposed to the stock 8. This PC has a Radeon RX580 graphics card and an i7. Not really high end in terms of gaming PCs, but better than what I had before (a mid-end i5 Asus toaster from 2015 with integrated graphics). I swapped back to the Asus recently due to the issues I'd been having. It will eventually be overhauled as well--I am doubling the RAM in it as well, and cleaning it. May add a graphics card while I'm at it; and upgrade the power supply and cooling--big case the old Asus M32CD
Not long after, I canceled the order for the previous generic power supply, and got the exact one. Price may have been double, but at least there won't be as many headaches replacing like for like, as the cables are already bundled and tied up the way they should be, for the most part. And I'll know FOR SURE the connectors are the right ones. The weird thing about this power supply is that the place the power cable plugs into is not soldered onto it, but instead plugs in. Thus, one-size-fits-all supplies weren't gonna cut it.

-
First post, Charge+ TTi supposed to arrive Thursday!

-
Hi Steve_T and welcome to

Look forward to see your pics
when you get your Charge+ TTi
-
-
I'm waiting on a serrated Cold Steel Voyager Vaquero XL. I've have gotten back into the 5.5" XL Cold Steel lineup as of late. Compensating for my inadequacies, you know.

Cold Steel Rajah II. -
@pfrsantos said:
Nice start! Welcome aboard, Steve!That's what she said.
-
@powernoodle said:
I'm waiting on a serrated Cold Steel Voyager Vaquero XL. I've have gotten back into the 5.5" XL Cold Steel lineup as of late. Compensating for my inadequacies, you know.
Cold Steel Rajah II.Sometimes, a knife that big isn't exactly overkill. Just great for those moments where a large knife with a thick blade is needed; but a fixed blade on your hip is just gonna end up hanging up on everything and being a general pain in the backside. Vs. a big knife like this clipped to your back pocket that isn't gonna get in the way of anything .
-
Yeah there are pretty good ways to carry a super large knife like the Cold Steel XL lineup. Even the Rajah II carries fine in the pocket, though its sticks out a good bit, and there are plenty of extra pockets that work on 5.11 Taclite Pro pants and a Dickie's work shirt.
Mostly I carry one of these knives just because its fun. They have more knife flavor than smaller knives.
-
Well,
I've been and gone and done it
I ordered the FX today (from Vic' UK) along with a couple of the standard red lanyard things.
The FX was £53 (64.63 USD or 59.32 EURO) so, not cheap, but a four layer Alox is a thing worth buying..right

It says 2 - 3 "working days" for delivery (so who knows
)Watch this space....

-
A nasty Mark!
Cooking ribs in the oven and my wrist touched the one oven wire rack, OUCH!
JR
-
:ahhh :ahhh :ahhh
-
A few SAKs for peanuts. These are models I don't have, or ads I wanted. Most are also in colors I don't have. But, this seller has given me some minor grief every now and then. Their inventory system is inadequate, and they will often substitute POS knives in their place. And I have been sent the wrong knife a few times. The fine folks at Kershaw will have to fix one of this seller's slip ups soon; a Kershaw Leek with a blade that is an inch short, and sharpened on a bench grinder. The guy never said anything sent me anything back after I contacted him about this knife.
Spartan, Asea Brown Boveri (Red translucent) They operate a factory producing high voltage transformers in Bland, about a half-hour from here. AMR Pemco, located here in town, does some of the winding work for them. Both companies are on my list for employment when I start looking for a job this fall, and I feel that (if knives are allowed) carrying a knife at work with the company's logo would be great. Meant to buy an identical knife from Grant two years ago (right before I went on the grand tour of the ABB facility), but this was at a time I didn't have my own payment method; and getting it approved through my folks was tough.

Standard (late '70s?) Brown Boveri. Company merged with ASEA in 1988 to form ABB thus for sure, we know the knife is no newer than that. Inlaid ad, and a vintage SAK. Thus, I couldn't help it for $5 since it was grouped in the same selection as the knife above. Collection knife to never be carried or used (except as a dress carry at special events if I work at one of the two aforementioned companies). This is the one after the '70-73 Standard I have in the Spartan evolution subcollection.

Tinker. I don't have one anymore. I gave my NIB 1980s Caterpillar Tinker Small to a buddy of mine 3 1/2 years ago, as I knew he'd appreciate it, and it would mean I'd finally free myself of the temptation to carry it. This is an SAK that serves as "just a pocketknife with some extra stuff". Scales will be replaced with custom orange G-10 from SwissBianco. Did not notice scales are chipped, but since they're getting replaced, it doesn't matter. Besides, $4.

Black Alox Ambassador (money clip, quite possibly). For $5, who's gonna pass up Alox? Even if it is busted, Vic will fix it. Being black, this also allows me to be eligible for the Alox Level 1 badge. I hope that I get sent one the guy showed with a Valmet logo.

Blue Climber. I have the Huntsman, Fieldmaster, and Super Tinker; but not a Climber. Chose the Wistar ad as they are doing a lot of coronavirus research. Photo only shows back of knife with the Swiss Cross.

-
Prices are great, but having problems with the seller, more than once? I'd be passing those deals. Couldn't stand the nail biting from ordering until receiving the knives...

-
@pfrsantos said:
Prices are great, but having problems with the seller, more than once? I'd be passing those deals. Couldn't stand the nail biting from ordering until receiving the knives...
Having said that, I hope this is one time the seller really sends you what was advertised (or an even better version thereof).
Good luck, bro!

-
@Mechanickal said:
A Fiskars X5 camp/freetime axe is on the way to my local DIY for pickup.
It's not that expensive, but somehow I kept postponing getting one
Arrived!


Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login





