SOG PowerAccess
-
Wow! Apparently most people here do not visit the SOG forums!

-
I know what you mean. Last Friday I bought a Ozark Trail Multiforce multitool from Walmart. It was about $40.00 with tax, made in China, but priced as such. It is a much more impressive tool than my Power Access Deluxe which was almost twice the cost. I just looked at my older SOGS (The Powerlock and Powerassist), and even though I do not care for the tool covers, they seem to be much better made than the current models. I have a few more current models that I picked up over the last few years, and they are fine, but SOG seems to make them lighter just for the sake of doing so, and the tools just do not seem to give me a feeling of confidence as the older ones. They should bring their production back to the US, especially if they are a US based company.
-
@Chako said:
I found this in a small out of the way place called Tunnel Lake, which is a good distance up highway 129 to Chapleau Ontario Canada. I wasn't going to buy it seeing that I though I already had one...but I wasn't sure, and I wasn't going to make the trip again when I got home to check. Happy to say, this is a new one for my collection.<a href="https://s145.photobucket.com/user/Chako_photo/media/Chako_photo006/20190815_192404small_zpsu4bmkt5f.jpg.html" target="_blank" rel="noopener noreferrer"><img src="https://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo006/20190815_192404small_zpsu4bmkt5f.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="http://s145.photobucket.com/user/Chako_photo/media/Chako_photo006/20190815_192414small_zpsjb91nmqc.jpg.html" target="_blank" rel="noopener noreferrer"><img src="https://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo006/20190815_192414small_zpsjb91nmqc.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="http://s145.photobucket.com/user/Chako_photo/media/Chako_photo006/20190815_192430small_zpshzekoj9k.jpg.html" target="_blank" rel="noopener noreferrer"><img src="https://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo006/20190815_192430small_zpshzekoj9k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="http://s145.photobucket.com/user/Chako_photo/media/Chako_photo006/20190815_192524small_zpsctj1sbvj.jpg.html" target="_blank" rel="noopener noreferrer"><img src="https://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo006/20190815_192524small_zpsctj1sbvj.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
After looking up the tool, I found out that I am a bit behind on my SOG collection. For example, I do not have:
- PowerAccess Deluxe
- PowerLitre
- PowerPint
- Snippet
- Sync 1
- Sync 2
- Baton Q1
- Baton Q2
- Baton Q3
- Baton Q4
:ahhh
<a href="http://s145.photobucket.com/user/Chako_photo/media/Chako_photo006/20190815_192632small_zps9olzvzm6.jpg.html" target="_blank" rel="noopener noreferrer"><img src="https://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo006/20190815_192632small_zps9olzvzm6.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
Looks like I haven't watched SOG in the last few years and they got a load of new models.

Nice addition, Chako!

-
I don't know whether or not this has already been mentioned or not but you don't get something for nothing and the mechanical advantage of the SOG pliers is gained by sacrificing displacement. In other words, to gain the 2 to 1 mechanical advantage, the jaws open only half as much as an equivalent multi-tool with no mechanical advantage. Try clamping a 3/8 hex nut with a SOG multi-tool and see how far apart the handles are; so far apart that you can hardly wrap your hand around the handles. The incorporation of a 4 bar link, similar to vise grips seems to me the only viable mechanism to obtain the kind of clamping force SOG advertises, or a fold out handle extension. Of course if you're really in need of a hand tool to break a 3/8 or even 5/16 bolt, you probably wouldn't use a multi-tool anyway, unless it's all you have. All that said, I really like the design of the SOG Power Access and carry one along with my Leatherman Wave.
-
Welcome to
brab 
-
I like my PowerAccess quite a lot. It's a very nice EDC tool, lightweight with a good tool load out. Compared to the entry-level offerings from Gerber (Suspension NXT) and Leatherman (Wingman), there really is no contest, this SOG is the winner for me. My file even works well on steel, aluminum, and wood. However, using it on stainless steel will work, but it will damage the file. (My Gerber MP600 and Center drive file, on the other hand, will file down stainless steel just fine, and not be damaged in the process). Overall I think it's a great lightweight carry. I just did a bunch of wiring and plumbing in my garage, and though I did hit the limitation of the tool for large nuts (electrical box strain relief), and was a little scared to do heavy prying with the thin driver, overall I'm extremely pleased with the tool. I think it has replaced my Gerber Octane as my lightweight carry.
It's cool you brought up the Multiforce. The Multiforce is one of my favorite tools, and it's a great for a heavy carry day. Bang for buck it's $100 cheaper than a similarly-equipped Wave, and I actually like the design better. When I need needle nosed heavy-duty pliers and stout tools, it's the one I grab.
Charles.
-
Hi,
I was wishing to have a SOG and found a Poweraccess on sale in Ebay with pouch, bits and a samll centi lI knife for US27, the only issue was that the blister has a note of made in China, so I sent an email to SOG and they confirm this is one of their products sold iin Cotsco, so I am happy and waiting to receive it next week.
Any comments about SOG products made in China? are they lower quaity compared with made in USA?

-
I don’t have any clue about the comparison between the us and China made sog, but I can confirm better quality than the gerber nxt and wingman.
Charles.
-
@ChopperCharles said:
I don’t have any clue about the comparison between the us and China made sog, but I can confirm better quality than the gerber nxt and wingman.Charles.
Tks Charles.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login