MTO Unleashed!
-
Lovely, Yeoman!

-
@Noa Isumi said:
Day 3So for today's blade we have the newest addition a little Eafengrow EF11 sheepsfoot monkey tag folder in D2. No real story behind this one; I just felt like buying it and somehow it ended up in the cart with some stuff my wife asked me to order....


Looks great! A lot of the less expensive knives I own were purchased solely to get over a minimum for free shipping, a discount, and/or a free item. Or because--"It's not that big, is gonna ship in the same box, and no one's gonna notice it" .
-
@Sos24 said:
There are some really nice knives so far, especially some nice fixed blade one.I had thought about doing a couple fixed blades today but then changed my mind.
[B]Day 3 [B]
I figured today I would go with my current favorite, the SAK Yeoman. For the longest time the Compact was my favorite SAK. It was such a simple toolset yet so useful. The biggest thing I missed was the phillips driver. Then I discovered the Yeoman existed. After a lot of looking, I finally found one in great shape and a price I would pay. I instantly fell in love. The whole toolset just works for me.
I did sharpen one corner of the combo tool, not to impact other functions, so it works nicely for package opening and added some custom scales I found on etsy to make it my perfect SAk.
Love those scales !
-
@Noa Isumi said:
Day 3So for today's blade we have the newest addition a little Eafengrow EF11 sheepsfoot monkey tag folder in D2. No real story behind this one; I just felt like buying it and somehow it ended up in the cart with some stuff my wife asked me to order....


Sharp looking knife, I can see why you felt like buying it.
-
Thanks sak60, Nix and Steve.
-
Day 4
The Marvel MEK 70 electricians knife. Bought for work but a bit too big and bulky for me .
-
@cody6268 said:
Day 3. Since I'm continuing with fence work, another case of: Good enough knife to where I don't mind using it, cheap and common enough to where I don't mind losing it. Thus, today, I chose the CRKT M16-10KZ; which is $30 from pretty much any Lowe's that carries knives. Until I went higher-end, it was my main EDC for close to a year. It is light enough to where, unlike the bigger knives I have shown before, it is comfortable even in these lightweight shorts. And the deep carry clip won't get knocked off. This one is much smaller than the full-size model, at 4" closed with a 3" blade. That's enough to get the job done and fall under the limit of 3.5" blades in West Virginia (I live in VA; with no blade limit in my area, but WV has 3.5" statewide).I am going with a full-sized M16 eventually for work. Today found the 10KZ is too small for gloved hands. Currently, it's the M16-14ZER that gets my attention, being AUS-8, and having a strap cutter. But, that stinkin' glass breaker. It ruins seats and hurts hands. On some knives, glass breakers are threaded and easily removable. But, I don't know about the M16's.
With the fencing work on hold for a bit, I think tomorrow, I finally have the chance to (finally!) go traditional.

The CRKT M16 series was my first folder. I liked it. But when I bought the griptilian it was an eye opener. From my opinion at least. From now on it’s a SAK though
Sent from my iPhone using Tapatalk
-
@Fuzzbucket said:
Most excellent challenge so far! 

-
DAY 4
A Columbia knife


-
@Sos24 said:
There are some really nice knives so far, especially some nice fixed blade one.I had thought about doing a couple fixed blades today but then changed my mind.
**Day 3 [B]
I figured today I would go with my current favorite, the SAK Yeoman. For the longest time the Compact was my favorite SAK. It was such a simple toolset yet so useful. The biggest thing I missed was the phillips driver. Then I discovered the Yeoman existed. After a lot of looking, I finally found one in great shape and a price I would pay. I instantly fell in love. The whole toolset just works for me.
I did sharpen one corner of the combo tool, not to impact other functions, so it works nicely for package opening and added some custom scales I found on etsy to make it my perfect SAk.
Stunning scales on that Yeoman, Sos24!

[b]Day 4**
Out first thing to replace the squirrel feeder - they’ve finally managed to break this one! Wenger M61 redacale 1965 (my BYSAK - thanks again Myron for supplying it) does the screwdriver duty.

-
Photo went sideways for some reaso?

-
Today was a Buck 110 day. This one was issued with "Paperstone" scales. These are essentially a paper micarta. In this configuration the 110 in light and easy to carry. Out in the yard, the 110 pruned some branches and cut some irrigation line as I continue to modify the system to accommodate Winter's effects and some new plants.

While the 110 took care of small stuff, I had to pull out my Silky saw to prune off the remnants of a previously pruned limb on a young Maple tree. Hey, at least it's growing!

I love this saw! Cuts on the pull cut and cuts with determination. An excellent blade to have on hand.

There were a few questions about the 102...yes, I got it right this time...the 102:

Top to bottom: 119, 110, 102The 119 clearly dwarfs the others. I really like the beefy 119; however, for day to day utility, the 110 and 102 steal the show in my book. There was a question about the handle material of this 102. I beleive it is Buck's standard phenolic resin stuff, just in 'red' as opposed to black. I'd call it 'maroon' or 'ox blood' but Copper and Clad went with 'red'. I like it!
I think the silver goes well with the red handles Nix ;)
As fragile as the "paper micarta" looks I assume they're very sturdy. Borg has a 110 one in red I think

-
@Sos24 said:
There are some really nice knives so far, especially some nice fixed blade one.I had thought about doing a couple fixed blades today but then changed my mind.
[B]Day 3 [B]
I figured today I would go with my current favorite, the SAK Yeoman. For the longest time the Compact was my favorite SAK. It was such a simple toolset yet so useful. The biggest thing I missed was the phillips driver. Then I discovered the Yeoman existed. After a lot of looking, I finally found one in great shape and a price I would pay. I instantly fell in love. The whole toolset just works for me.
I did sharpen one corner of the combo tool, not to impact other functions, so it works nicely for package opening and added some custom scales I found on etsy to make it my perfect SAk.
... and in green

-
DAY 4
I wasn’t going to post another Ka-Bar just yet but the Patch and Ka-Bar survival whistles arrived this morning so couldn’t resist :D
854C7E24-2A69-4A4D-84C1-EF61085B783B by Duncan Moore, on Flickr -
Thanks Rizio and McStitchy
-
My work toolbox knife
A no name wonder with a gift shop look to the rubber handle, the only markings on it are Japan and some numbers,
My daughter spotted this in the Sand about 30 years ago on one of the islands in Halifax harbour, it eventually came to work with me and never left,
It opens packages, cuts belts and hoses, scrapes gaskets helps with lunches and any other abuses I can put it through, and really doesn't show itWhat an interesting find, and who would have guessed it kept on going after 30 years?
@CraftsmanSAK said:
DAY 3My Buck 124 Frontiersman for day three. I do a paracord wrap on this and my 119 as I've had the rivet pull through the leather in the briers on one of my older 119's and there's a possibility I might cry if I lost this knife. (I also add some tennis tape wrap to the handle, because they polished the micarta on these scales to the point they kind of defeated the purpose of micarta - imo)
I like the tennis wrap, looks really functional!
Today was a Buck 110 day. This one was issued with "Paperstone" scales. These are essentially a paper micarta. In this configuration the 110 in light and easy to carry. Out in the yard, the 110 pruned some branches and cut some irrigation line as I continue to modify the system to accommodate Winter's effects and some new plants.

While the 110 took care of small stuff, I had to pull out my Silky saw to prune off the remnants of a previously pruned limb on a young Maple tree. Hey, at least it's growing!

I love this saw! Cuts on the pull cut and cuts with determination. An excellent blade to have on hand.

There were a few questions about the 102...yes, I got it right this time...the 102:

Top to bottom: 119, 110, 102The 119 clearly dwarfs the others. I really like the beefy 119; however, for day to day utility, the 110 and 102 steal the show in my book. There was a question about the handle material of this 102. I beleive it is Buck's standard phenolic resin stuff, just in 'red' as opposed to black. I'd call it 'maroon' or 'ox blood' but Copper and Clad went with 'red'. I like it!
Nix, thank you for the comparison photo, it does put their size into prospective. With the 'ox blood' handle 102, does the balance point of the knife center near or close to the index finger?
-

I wasn’t going to post another Ka-Bar just yet but the Patch and Ka-Bar survival whistles arrived this morning so couldn’t resist :D
854C7E24-2A69-4A4D-84C1-EF61085B783B by Duncan Moore, on FlickrSmall world, I got those not too long ago! Can't resist the whistle!
:D -
Day 4


Benchmade Bugout and Bailout, ultralight has been one of the 'theme' for last year, and in between the two, I actually like the Bailout a little better. Slightly more robust, and 3V offering is pretty unique. -
@Storm said:
Day 4
The Marvel MEK 70 electricians knife. Bought for work but a bit too big and bulky for me .Gotta hate when a knife doesn’t work out...excuse to buy a new one.
A Columbia knife

That is a vicious looking knife
@Rizio Il Ghiro said:
Stunning scales on that Yeoman, Sos24!
Day 4
Out first thing to replace the squirrel feeder - they’ve finally managed to break this one! Wenger M61 redacale 1965 (my BYSAK - thanks again Myron for supplying it) does the screwdriver duty.
You mist have some destructive squirrels.
I wasn’t going to post another Ka-Bar just yet but the Patch and Ka-Bar survival whistles arrived this morning so couldn’t resist :D
Nice looking Ka-Bar
-
Small world, I got those not too long ago! Can't resist the whistle!
:D
I’m trying so hard to get my hands on a Ka-Bar Space force patch but alas no luck so far
2CC45C22-0A83-403E-9A5B-4EFF996AB7BA by Duncan Moore, on Flickr
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login