MTO Unleashed!
-
Day 5: Chose the Queen #63 Railsplitter, American Walnut. Produced in 2015; and I've had it pretty much ever since then. Only Queen I owned for quite a few years. D-2 is hard to sharpen, but for a work knife, is pretty much where it's at. Edge was pretty bad when I got it (this was not long before they went under, at a time their quality was also notoriously bad), then I dinged the sheepsfoot blade (cut into metal hammer head hafting a new handle for it). Recently, I picked up the Worksharp Guided Field Sharpener, and it works pretty well I'll admit. May have to replace the strop, messed it up accidentally pushing, not pulling the blade across it.
Personally, in a lot of ways, I prefer the Railsplitter over Stockman. The handle is just large enough for my uses. It is also comfortable during very heavy cutting. I know Queen did make 1095 versions, so I might try those soon. I'm hoping there's a Moore Maker version.

-
DAY 5
One of the setups I might throw on my pack when headed out on dual sport bikes. This one is a Tops/Buck CSAR-T, with a SOG Twitch II, and a Leatherman Rebar.
-
Day 1
I'm working from home and barely put pants on today. But I was drinking from my NCSU mug, and I've had this knife on the Lansky in the other room for the past few days, putting an edge on it. (It had the worst edge imaginable on it). I snagged this off of eBay a month or so ago. I don't really know anything about it. "USA" is stamped on the blade. It's two layers with no liner between the layers, and it feels sorta cheap. The blades push against each other and it's difficult to open. BUT, it's the only NCSU-branded knife I've ever found, so I snagged it. Helps that it was also dirt cheap. I've seen and held a UNC version of this same knife in my hand as well. It was in better shape and the blades didn't drag against each other, but NCSU is my alma mater.
Normally this knife would never leave the shelf, but today I finished sharpening it and its in my pocket and next to my coffee! :)
Charles.

-
@glenfiddich1983 said:
...5 more brand new 108mm SolosI like the way you think. :D
-
@ChopperCharles said:
Day 1I'm working from home and barely put pants on today. But I was drinking from my NCSU mug, and I've had this knife on the Lansky in the other room for the past few days, putting an edge on it. (It had the worst edge imaginable on it). I snagged this off of eBay a month or so ago. I don't really know anything about it. "USA" is stamped on the blade. It's two layers with no liner between the layers, and it feels sorta cheap. The blades push against each other and it's difficult to open. BUT, it's the only NCSU-branded knife I've ever found, so I snagged it. Helps that it was also dirt cheap. I've seen and held a UNC version of this same knife in my hand as well. It was in better shape and the blades didn't drag against each other, but NCSU is my alma mater.
Normally this knife would never leave the shelf, but today I finished sharpening it and its in my pocket and next to my coffee! :)
Charles.
I am pretty sure that's a Colonial--they put out tons of those little jacks for advertising and commemorative issues from the '50s-'80s. Good steel in them. They sharpen up very well.
-
What are you doing under Duncs bed???

-
It's the anniversary of D-Day tomorrow, I'll be totin' some WW2 era knives in honor of the day

-
-
Day 5
Today is the first quality single blade folder that I bought myself - Benchmade Osbourne. This knife spent a lot of time in my pocket on ship. Usually keeping company with a Gerber Mr. Pinchy (which is somewhere around, but not sure where). This knife opens so easily with a flick of wrist that I do not even have to touch the thumb studs.

-
Today is the first quality single blade folder that I bought myself - Benchmade Osbourne. This knife spent a lot of time in my pocket on ship. Usually keeping company with a Gerber Mr. Pinchy (which is somewhere around, but not sure where). This knife opens so easily with a flick of wrist that I do not even have to touch the thumb studs.

That knife is what got me into Benchmade knives and learning what a quality knife was.
I couldn’t afford the Osbourne so I bought a Griptilian[emoji23]Sent from my iPhone using Tapatalk
-
Today is the first quality single blade folder that I bought myself - Benchmade Osbourne. This knife spent a lot of time in my pocket on ship. Usually keeping company with a Gerber Mr. Pinchy (which is somewhere around, but not sure where). This knife opens so easily with a flick of wrist that I do not even have to touch the thumb studs.


-
Today is the first quality single blade folder that I bought myself - Benchmade Osbourne. This knife spent a lot of time in my pocket on ship. Usually keeping company with a Gerber Mr. Pinchy (which is somewhere around, but not sure where). This knife opens so easily with a flick of wrist that I do not even have to touch the thumb studs.
One of my all time favorites!

-
@ChopperCharles said:
Day 1:ahhh Excellent to have you join in! :ahhh
(Sorry if we were not more helpful earlier.... :-[)
-
Day 05:
I'm dedicating this shot to Barry, my brother in Trapper affection.


-
@BClogic said:
That knife is what got me into Benchmade knives and learning what a quality knife was.
I couldn’t afford the Osbourne so I bought a Griptilian[emoji23]Sent from my iPhone using Tapatalk
Here some time ago, a member here listed several Benchmades for $50; all in very good condition. I bought a Mini Griptillian, which for me, was my first Benchmade (not counting the Rescue Hooks I already owned). It is my primary EDC folder these days, replacing more mid-end models. It will put any mid-end folder to shame--it is even better than my Kershaw Leek (the other tactical I carry these days). Extra marks for the AXIS Lock being friendly to use and carry with the right or left size. I'm left handed, so left front pocket carry. It is 154CM, and I can't wait to try an S30V version.
-
@cody6268 said:
Here some time ago, a member here listed several Benchmades for $50; all in very good condition. I bought a Mini Griptillian, which for me, was my first Benchmade (not counting the Rescue Hooks I already owned). It is my primary EDC folder these days, replacing more mid-end models. It will put any mid-end folder to shame--it is even better than my Kershaw Leek (the other tactical I carry these days). Extra marks for the AXIS Lock being friendly to use and carry with the right or left size. I'm left handed, so left front pocket carry. It is 154CM, and I can't wait to try an S30V version.Both my stolen Grip and current Grip are D2 models. Since I started carrying a SAK I just fell out of folders. Also had a Snap-On series Leek, I never could get used to it and gifted it away. If I didn’t gift some many knives away I would probably be in this months challenge [emoji23][emoji23][emoji23]
Sent from my iPhone using Tapatalk
-
Great day 5 knives everyone.

Day 6.
Part of the Kabar collection (different makers)
for 6th June remembrance.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


